US $560
Fargo, North Dakota, United States
Jun 9th
Contact Seller
Complain
Open on mobile:
Fits UNIMAT SL DB (M12-1.0 mm) and UNIMAT 3 (M14-1.0 mm) Live Center Set UNIMAT Compatible Size: UNIMAT SL DB AND UNIMAT 3 INCLUDED: -) Fixture for UNIMAT SL DB, steel -) Fixture for UNIMAT 3, steel -) Interchangeable bearings set -) Short pin, live center, tool steel -) Long pin live center, tool steel -) bullnose live center, tool steel -) Revolving adapter for mounting 3/8-24 Jacobs chuck, steel, Jacobs chuck not included, allows for using a live center without center drilling the part -) storage box SPECS: TIR <0.002 (on bearings pin), interchangeable centers mounted with set screws, set of two bearings stack interchangeable UNIMAT SL / UNIMAT 3 R3-2RS Sealed Ball Bearings, the R3-2RS inner diameter is 3/16" inch, R3-2RS outer diameter is 1/2"inch and the R3-2RS width inch is 0.196" inch, each R3-2RS bearing are rubber sealed from both sides to protect the bearing from dust or any possible contamination, R3-2RS bearings are pre-lubricated with grease. •Type: Deep Groove Ball Bearings •Closures: Rubber Sealed R3RS •Lubrication: Self Lubricated (Grease) •Dimensions: 3/16" x 1/2" x 0.196" English Size •ID (inner diameter)/Bore: 3/16" inch •OD (outer diameter): 1/2" inch •Width/Height/thickness: 0.196 inch •Size: 3/16" x 1/2" x 0.1960" •Dynamic load rating: 295 LBS •Static load rating: 110 LBS •Equal: R3-2RS1 &R3-2RZ All LatheCity tools come with a small manual and safety booklet. Purpose of that tool: Turn work safety between centers. Safety Notes, Trouble Shooting, and Disclaimer: General safety rules for machine/power tools are in place. For an extended list of safety notes, consult the literature. Neither LatheCity nor its owner shall be liable for damage arising from misuse or unprofessional use of lathe and mill accessories. Training and experience is required to safely use power tools and accessories. Using a motor tool can be dangerous and the proper use is the responsibility of the one who is using the tool. If you are not perfectly comfortable with working with motor/power tools, then don’t do it! Find a different hobby. Don’t use half broken or damaged tools. Thoughtful work will be at your responsibility. Max RPM 1800 Any legal action brought against LatheCity/Uwe Burghaus shall be tried in the State of North Dakota in Fargo, USA. WARRANTY: we do not provide any warranty for our products. In no event shall LaheCity's liability exceed the purchase price paid for the product. We shall in no event be liable for death, injuries to persons or property or incidental, contingent, special or consequential damage arising from the use of our products. None of our accessories or custom designs is intended to be used for transportation applications including but not limited to cars, motorcycles, airplanes, roller skates, bicycles, agriculture vehicles, etc., for civilian or military applications. Similarly none of our accessories or custom designs is intended to be used as components of weapons including but not limited to firearms for civilian or military applications. We herewith explicitly exclude any warrantee or liability if LatheCity products were used directly or indirectly or misused directly or indirectly for the above-mentioned applications (transportation, weapons). Trademarks used in our products (books, manuals, etc.) or used on this website: All trademarks and copyrights are the property of their respective owners. Do not mount a lathe chuck on the revolving adapter Returns in resalable condition accepted within 14 calendar days, no questions asked. However, we do NOT reimburse shipping costs, credit card fees, broker fees, taxes, etc. We will charge the respective shipping costs to customers for products that were offered as free shipping when returned. We charge up to $5 for damaged manuals and safety booklets if these need to be reprinted. Return items in resalable condition. Product details may deviate from images shown without compromising the function of the tool. For example, stock diameters may differ. Note that the return rate of LatheCity products is below 1%. Read our customer feedback at eBay. International shipping: when purchasing our products customer accepts the following. International orders ship with regular USPS mail, no tracking, no insurance. We will not reimburse or replace lost orders. Customer covers all custom fees, broker fees, and taxes if applicable at all. You will NOT get a tracking number on international orders. We can provide the customs number and mailing costs receipt if required. Credit card companies may charge currency transfer fees which will be covered by the customer. We charge up to $3.00 for handling on international orders. We charge a standard shipping rate on international orders which may be above the actual rate. We will reimburse over paid shipping costs via PayPal if actual cost are lower by at least $2.00. (Example, shipping cost to Italy $11.45 + $3.00 handling, paid $25, reimbursed $10.55; or shipping to Canada $7.54 paid $8.00, no reimbursement.) Please note that PayPal will charge credit card fees for every transaction. We will not reimburse credit card fees (2-3%). Copyright © 2012 Uwe Burghaus, Fargo, North Dakota, USA LatheCity is a small business registered in North Dakota, USA – we are the manufacturer and not a retailer. INCLUDED: -) Fixture for UNIMAT SL DB, steel -) Fixture for UNIMAT 3, steel -) Interchangeable bearings set -) Short pin, live center, tool steel -) Long pin live center, tool steel -) bullnose live center, tool steel -) Revolving adapter for mounting 3/8-24 Jacobs chuck, steel, Jacobs chuck not included, allows for using a live center without center drilling the part -) storage box SPECS: TIR <0.002 (on bearings pin), interchangeable centers mounted with set screws, set of two bearings stack interchangeable UNIMAT SL / UNIMAT 3 Bearings specs R3-2RS Sealed Ball Bearings, the R3-2RS inner diameter is 3/16" inch, R3-2RS outer diameter is 1/2"inch and the R3-2RS width inch is 0.196" inch, each R3-2RS bearing are rubber sealed from both sides to protect the bearing from dust or any possible contamination, R3-2RS bearings are pre-lubricated with grease. •Type: Deep Groove Ball Bearings •Closures: Rubber Sealed R3RS •Lubrication: Self Lubricated (Grease) •Dimensions: 3/16" x 1/2" x 0.196" English Size •ID (inner diameter)/Bore: 3/16" inch •OD (outer diameter): 1/2" inch •Width/Height/thickness: 0.196 inch •Size: 3/16" x 1/2" x 0.1960" •Dynamic load rating: 295 LBS •Static load rating: 110 LBS •Equal: R3-2RS1 &R3-2RZ Purpose of that tool Miniature lathe tailstock live center for model work. In contrast to dead centers, live centers don’t need cutting oil and rotate with the work piece in order to machine delicate parts. The steel live center has two bearings for higher stability and smaller runout. The centers are tool steel. First test Use a #1 center drill and center drill a work piece. Mount live center in tailstock and push towards the center drilled work piece in the headstock. The live center should start to rotate which is best seen at low RPM. Use a marker pin and place a dot on the pin end of the live center. You will need to center drill the work piece or the live center has not enough rip to turn. Possible set ups Safety Notes, Trouble Shooting, and Disclaimer: General safety rules for machine/power tools are in place. For an extended list of safety notes, consult the literature or go to our website. You can download free of charge a safety booklet, which is also typically included (free of charge) for first-time customers. Use protective closing including, most importantly, safety glasses for metal work. Use accessory for light lathe work on miniatures. Max RPM 2800 Broken bearing may result in the front pin getting stuck in the work piece which can in turn over heat. In that case, switch off the lathe, cool down work piece, and replace cooled down bearing. Note that bearings are not designed to take large side forces. Note also that no life center will be as ridged as a dead center pin. We do not warrant that any accessories can be used for any particular application. Usage of accessories or damage caused by unprofessional use is at the risk of the customer. Neither LatheCity nor its owner shall be liable for damage arising from unprofessional use or misuse of LatheCity accessories. Any legal action brought against LatheCity/Uwe Burghaus shall be tried in the State of North Dakota in Fargo, USA. WARRANTY: we do not provide any warranty for our products. In no event shall LaheCity's liability exceed the purchase price paid for the product. We shall in no event be liable for death, injuries to persons or property or incidental, contingent, special or consequential damage arising from the use of our products. (LatheCity) Fargo, North Dakota, USA ©, 2013, LatheCity
