+ Post new Ad
LMT Onsrud 91-100 series spoilboard cnc router bit, US $335.00 – Picture 0
LMT Onsrud 91-100 series spoilboard cnc router bit, US $335.00 – Picture 1
LMT Onsrud 91-100 series spoilboard cnc router bit, US $335.00 – Picture 2
LMT Onsrud 91-100 series spoilboard cnc router bit, US $335.00 – Picture 3
LMT Onsrud 91-100 series spoilboard cnc router bit, US $335.00 – Picture 0
LMT Onsrud 91-100 series spoilboard cnc router bit, US $335.00 – Picture 1
LMT Onsrud 91-100 series spoilboard cnc router bit, US $335.00 – Picture 2
LMT Onsrud 91-100 series spoilboard cnc router bit, US $335.00 – Picture 3

Lmt Onsrud 91-100 Series Spoilboard Cnc Router Bit

US $335.00

  • Wayland, Michigan, United States
  • Jan 30th
Open on mobile:
QR code
Spoilboard Surfacing CuttersOnsrud 91-100 SeriesProduct DescriptionDoes the job require surfacing spoilboards? Use these Spoilboard Surfacing Cutters from Onsrud for surfacing MDF, practicleboard, and balsa core when employing "flow through" or "high flow" fixturing with large capacity vacuum pumps. This method allows for faster table planing. Available in straight and upshear styles.UsageSurfacing of MDF, particleboard, and balsa coreNotesThese tools are dynamically balanced and approved for use on CNC routers.Max RPM=18,000 (maximum revolutions per minute)Max DOC=1/8" (maximum depth of cut)Standards2-1/2" diameter tools should be fed at 200-600 IPM (inches per minute) at 12,000-16,000 RPM (revolutions per minute). 4" diameter tools should be fed at 200-600 IPM (inches per minute) at 12,000-14,000 RPM (revolutions per minute). The maximum depth of cut is 1/8" per pass. To maintain operator safety and tool performance, please do not exceed this limit.   Series: 91-100 Cutting Edge Diameter(CED): 4" Cutting Edge Length(CEL): 1/2 " Shank Diameter(SD): 3/4" Overall Length(OAL): 3.05? OAL Tool Geometery:  Tool Material: CT Cutting Edge:  Designed for surfacing MDF, partical board and balsa core where flow through or high flow fixturing is employed using large capacity vacuum pumps. Usage: Aluminum, Plastics and Composite Woods  (HP) = Hard Plastic (SP) = Soft Plastics (A) = Aluminum (CW) = Composite Wooods Will also throw in 10 lmt.onsrud 91-125 replacement blades thats $50 in free blades!!!! Paypal only with 2nd shipping for only $5!!!!
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Brand LMT•UNSRUD
Model 91-102

Directions

Similar products from Router Bits & Sets

1/2" solid carbide compression router bit

1/2" solid carbide compression router bit

  • Elgin, Illinois, United States
  • Jan 30th
FLUSH TRIM ROUTER BIT(NIP)

FLUSH TRIM ROUTER BIT(NIP)

  • Monroe, New York, United States
  • Jan 30th
Freud 99-019 Convex Edge router bid

Freud 99-019 Convex Edge router bid

  • Seeley Lake, Montana, United States
  • Jan 30th
Freeborn Cope and Pattern T-Alloy MT-50-010 (others available too)

Freeborn Cope and Pattern T-Alloy MT-50-010 (others available too)

  • Springfield, Missouri, United States
  • Jan 30th
Amana 45201 Straight Plunge Router Bit

Amana 45201 Straight Plunge Router Bit

  • Blowing Rock, North Carolina, United States
  • Jan 30th
2x SK10 Chrome Linear Guide Support Bracket Sliding Bearing GBW

2x SK10 Chrome Linear Guide Support Bracket Sliding Bearing GBW

  • Hong Kong, Hong Kong
  • Jan 30th
Amana Tool 55438 IN-STILE/RAIL STRAIGHT PLYWOOD ROUTER BIT SET

Amana Tool 55438 IN-STILE/RAIL STRAIGHT PLYWOOD ROUTER BIT SET

  • El Mirage, Arizona, United States
  • Jan 30th
2 Flute Straight Bit, 3/8 Dia, 1" Cut Length, 3/8 Shank, Whiteside SC19

2 Flute Straight Bit, 3/8 Dia, 1" Cut Length, 3/8 Shank, Whiteside SC19

  • Alpharetta, Georgia, United States
  • Jan 30th
2 Flute Solid Carbide Straight Router Bit, 1/2 Dia, 1 7/8" Cut Leng., 1/2 Shank

2 Flute Solid Carbide Straight Router Bit, 1/2 Dia, 1 7/8" Cut Leng., 1/2 Shank

  • Alpharetta, Georgia, United States
  • Jan 30th
3/4" compression carbide router bit, 3 flute

3/4" compression carbide router bit, 3 flute

  • Glen Ellyn, Illinois, United States
  • Jan 30th
Shank 6mm Woodworking Router Bits Tool 3D CNC Carving Knife For Wood MDF Plastic

Shank 6mm Woodworking Router Bits Tool 3D CNC Carving Knife For Wood MDF Plastic

  • ??, China
  • Jan 30th
1-1/4 carbide tip Shaper Cutter Industrial head 105 Ogee

1-1/4 carbide tip Shaper Cutter Industrial head 105 Ogee

  • Greenville, South Carolina, United States
  • Jan 30th
1-1/4 bore 1-1/8 cut 4 dia carbide insert 343 Shaper cutter straight rabbet dado

1-1/4 bore 1-1/8 cut 4 dia carbide insert 343 Shaper cutter straight rabbet dado

  • Greenville, South Carolina, United States
  • Jan 30th
1 PCS CNC router woodworking cove box bits 1/2'' 1"

1 PCS CNC router woodworking cove box bits 1/2'' 1"

  • JINAN CITY , SHANDONG PROVINCE, China
  • Jan 30th
1-1/4 b 1-1/4 c 8 dia 345 Shaper cutter carbide tipped staggered dado rabbet

1-1/4 b 1-1/4 c 8 dia 345 Shaper cutter carbide tipped staggered dado rabbet

  • Greenville, South Carolina, United States
  • Jan 30th
2 b 3-3/8 c 8 dia 346 Shaper cutter carbide tipped staggered Tenoner jointer

2 b 3-3/8 c 8 dia 346 Shaper cutter carbide tipped staggered Tenoner jointer

  • Greenville, South Carolina, United States
  • Jan 30th
40 PCS CNC Router Carbide PCB Engraving Bits 0.2mm

40 PCS CNC Router Carbide PCB Engraving Bits 0.2mm

  • JINAN CITY , SHANDONG PROVINCE, China
  • Jan 30th
RELIFE router bit set 30pce shaft diameter 6mm 30602 super hard Blade

RELIFE router bit set 30pce shaft diameter 6mm 30602 super hard Blade

  • Japan, Japan
  • Jan 30th
195 pcs. CNC router bits 10mm, 12 mm + more, 45 mm long, wood cutting bits

195 pcs. CNC router bits 10mm, 12 mm + more, 45 mm long, wood cutting bits

  • Pilot Rock, Oregon, United States
  • Jan 30th
10 pcs carbide endmill two flute spiral CNC router bits 1/8 22mm

10 pcs carbide endmill two flute spiral CNC router bits 1/8 22mm

  • JINAN CITY , SHANDONG PROVINCE, China
  • Jan 30th

People who viewed this item also vieved

Woodworking Project Paper Plan for Playhouse No. 881 New

Woodworking Project Paper Plan for Playhouse No. 881 New

  • United States
  • Jun 20th
Delta Machinery SV-300 Service Manual 2 Volume Set

Delta Machinery SV-300 Service Manual 2 Volume Set

  • Gillette, New Jersey, United States
  • Jun 21st
BEAVER-Rockwell 9" Tilting Arbor Saw 3200 Owner's & Parts Manual 1072

BEAVER-Rockwell 9" Tilting Arbor Saw 3200 Owner's & Parts Manual 1072

  • Nixa, Missouri, United States
  • Jun 21st
Big Horn 19680 Piece Miter Clamp Set, 25-Piece

Big Horn 19680 Piece Miter Clamp Set, 25-Piece

  • Escondido, California, United States
  • May 29th
Big Horn 19636 Right Angle Clamp

Big Horn 19636 Right Angle Clamp

  • Escondido, California, United States
  • May 29th
CHIC620 GLUING CLAMP 1/2"

CHIC620 GLUING CLAMP 1/2"

  • Tacoma, Washington, United States
  • May 29th
Wood Veneer Recon Zebrawood 48x98 1 Piece 10Mil Paper Backed "EXOTIC" KEV 35

Wood Veneer Recon Zebrawood 48x98 1 Piece 10Mil Paper Backed "EXOTIC" KEV 35

  • Jeffersonville, Indiana, United States
  • Jun 4th
Wood Veneer Steamed Beech 48x98 1pcs total 10Mil Paper Backed WCW 156

Wood Veneer Steamed Beech 48x98 1pcs total 10Mil Paper Backed WCW 156

  • Jeffersonville, Indiana, United States
  • Jun 4th
Wood Veneer Recon White Oak 46x98 1 Piece 10Mil Paper Backed "EXOTIC" KEV 47

Wood Veneer Recon White Oak 46x98 1 Piece 10Mil Paper Backed "EXOTIC" KEV 47

  • Jeffersonville, Indiana, United States
  • Jun 4th
Oshlun SBR-140030 14-Inch 30 Tooth FTG Saw Blade with 1-Inch Arbor (7/8-Inch and

Oshlun SBR-140030 14-Inch 30 Tooth FTG Saw Blade with 1-Inch Arbor (7/8-Inch and

  • USA, United States
  • Jun 5th
Oshlun SBF-070038 7-Inch 38 Tooth TCG Saw Blade with 20mm Arbor for Mild Steel

Oshlun SBF-070038 7-Inch 38 Tooth TCG Saw Blade with 20mm Arbor for Mild Steel

  • USA, United States
  • Jun 5th
Blade mfg Dado Chipper Blade Set 12 pieces 8 inch 1 inch arbor nice

Blade mfg Dado Chipper Blade Set 12 pieces 8 inch 1 inch arbor nice

  • Essex, Maryland, United States
  • Jun 5th
NAREX TOOL 1/2" CR-NM STEEL BRAND NEW METAL/WOOD WORKING, PRIORITY MAIL SHIPPING

NAREX TOOL 1/2" CR-NM STEEL BRAND NEW METAL/WOOD WORKING, PRIORITY MAIL SHIPPING

  • Brunswick, Ohio, United States
  • Jun 6th
Narex 150 mm 6" Rectangular Flat Cabinetmaker Wood Coarse Cut Rasp 872501

Narex 150 mm 6" Rectangular Flat Cabinetmaker Wood Coarse Cut Rasp 872501

  • Columbia, Missouri, United States
  • Jun 6th
Narex 200 mm 8" Rectangular Flat Cabinetmaker Wood Coarse Cut Rasp 872502

Narex 200 mm 8" Rectangular Flat Cabinetmaker Wood Coarse Cut Rasp 872502

  • Columbia, Missouri, United States
  • Jun 6th
Snappy 11/64 hinge bit replacement drill

Snappy 11/64 hinge bit replacement drill

  • Belleville, Wisconsin, United States
  • Jun 14th
Snappy 13/64 hinge bit replacement drill

Snappy 13/64 hinge bit replacement drill

  • Belleville, Wisconsin, United States
  • Jun 14th
Freeborn Bevel Detail Shaper Cutter

Freeborn Bevel Detail Shaper Cutter

  • Spokane, Washington, United States
  • Jun 14th
NEW IRWIN -88716- SPEEDBOR WOODBORING BIT ( 16" LONG ) ( 1" SPADE )

NEW IRWIN -88716- SPEEDBOR WOODBORING BIT ( 16" LONG ) ( 1" SPADE )

  • Birmingham, Alabama, United States
  • Jun 15th
NEW IRWIN -88714- SPEEDBOR WOODBORING BIT ( 16" LONG ) ( 7/8" SPADE )

NEW IRWIN -88714- SPEEDBOR WOODBORING BIT ( 16" LONG ) ( 7/8" SPADE )

  • Birmingham, Alabama, United States
  • Jun 15th
NEW IRWIN -88708- SPEEDBOR WOODBORING BIT ( 16" LONG ) ( 1/2" SPADE )

NEW IRWIN -88708- SPEEDBOR WOODBORING BIT ( 16" LONG ) ( 1/2" SPADE )

  • Birmingham, Alabama, United States
  • Jun 15th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies