+ Post new Ad
Logan / Delta Rockwell 10" Tailstock, US $350 – Picture 0
Logan / Delta Rockwell 10" Tailstock, US $350 – Picture 1
Logan / Delta Rockwell 10" Tailstock, US $350 – Picture 2
Logan / Delta Rockwell 10" Tailstock, US $350 – Picture 3
Logan / Delta Rockwell 10" Tailstock, US $350 – Picture 0
Logan / Delta Rockwell 10" Tailstock, US $350 – Picture 1
Logan / Delta Rockwell 10" Tailstock, US $350 – Picture 2
Logan / Delta Rockwell 10" Tailstock, US $350 – Picture 3

Logan / Delta Rockwell 10" Tailstock

US $350

  • Casa Grande, Arizona, United States
  • Jan 30th
Open on mobile:
QR code
This tailstock fits a 10" metal lathe. In the the picture it is sitting on my Logan lathe and it mounts perfectly. It also fits a Delta Rockwell and it may fit others, but I am not sure. I researched the numbers on the tailstock, but could not find them. The numbers are MBL-501 on the base and MBL-502 on the tailstock. The tailstock performs smoothly and is in nice shape. The only thing that I noticed was the quill lock had to be tightened pretty good to lock the quill. I did not have it mounted so it could be I was not getting enough torque on it. It comes with hold down clamp and bolt. 

Directions

Similar products from Other Workholding Tools

Lifting Magnet - Magnetic Lifter 300 KG - 660 Lbs Lifting Capacity with 2" Steel

Lifting Magnet - Magnetic Lifter 300 KG - 660 Lbs Lifting Capacity with 2" Steel

  • Seattle, Washington, United States
  • Jan 30th
BIG Kaiser 15.260.160 Turbo Unilock Zero-Point Clamping System Workholding Chuck

BIG Kaiser 15.260.160 Turbo Unilock Zero-Point Clamping System Workholding Chuck

  • East Hartford, Connecticut, United States
  • Jan 30th
MACHINISTS/TOOLMAKERS LIFT SWING by Accurate Bushing.C0. Model 3220A

MACHINISTS/TOOLMAKERS LIFT SWING by Accurate Bushing.C0. Model 3220A

  • Hawthorne, New Jersey, United States
  • Jan 30th
Magnetic Lifter 600 KG - 1320 Lb Lifting Magnet Steel Mag Hoist - Crane - Lift

Magnetic Lifter 600 KG - 1320 Lb Lifting Magnet Steel Mag Hoist - Crane - Lift

  • Seattle, Washington, United States
  • Jan 30th
Magnetic Lifter 1000 KG - 2200 LBS Hoist Magnets - Steel Lifting PML-10 - Crane

Magnetic Lifter 1000 KG - 2200 LBS Hoist Magnets - Steel Lifting PML-10 - Crane

  • Seattle, Washington, United States
  • Jan 30th
5-C Collet Spin Indexer with Dead Center

5-C Collet Spin Indexer with Dead Center

  • Rocky Point, New York, United States
  • Jan 30th
Heavy Duty Stud Leveling Mount Feet 3" Dia Base .75"

Heavy Duty Stud Leveling Mount Feet 3" Dia Base .75"

  • Leander, Texas, United States
  • Jan 30th
6 pc STARRETT ADJUSTABLE PARALLEL SET NO S 154L

6 pc STARRETT ADJUSTABLE PARALLEL SET NO S 154L

  • Saint Louis, Missouri, United States
  • Jan 30th
1320 Lb Lifting Magnet Magnetic Lifter 600 KG Lifting Capacity - Mag Steel Hoist

1320 Lb Lifting Magnet Magnetic Lifter 600 KG Lifting Capacity - Mag Steel Hoist

  • Seattle, Washington, United States
  • Jan 30th
MACHINIST TOOLS LATHE MILL Kennedy Machinist Plumber Tool Box

MACHINIST TOOLS LATHE MILL Kennedy Machinist Plumber Tool Box

  • Morris Plains, New Jersey, United States
  • Jan 30th
CNC Workholding Steel Tombstone 18" Wide x 32" High

CNC Workholding Steel Tombstone 18" Wide x 32" High

  • Reseda, California, United States
  • Jan 30th
C Clamp, Vintage Williams # 406 Deep Throat 6" C Clamp with original Box, USA

C Clamp, Vintage Williams # 406 Deep Throat 6" C Clamp with original Box, USA

  • Saunderstown, Rhode Island, United States
  • Jan 30th
Steel Magnetic Lifter 600 KG - 1320 Lb Lifting Magnet Max lifting Capacity on 2"

Steel Magnetic Lifter 600 KG - 1320 Lb Lifting Magnet Max lifting Capacity on 2"

  • Seattle, Washington, United States
  • Jan 30th
Brown & Sharpe 599-673-20 Adjustable Parallel Set

Brown & Sharpe 599-673-20 Adjustable Parallel Set

  • Jamaica, New York, United States
  • Jan 30th
Clamp, Vintage JORGENSEN No. 108, (8" C'Clamp), Made in the USA

Clamp, Vintage JORGENSEN No. 108, (8" C'Clamp), Made in the USA

  • Saunderstown, Rhode Island, United States
  • Jan 30th
8 PIECE ER32 ER 32 TOOL HOLDING COLLETS 5/16" TO 3/4" APPROXIMATE RANGE (2

8 PIECE ER32 ER 32 TOOL HOLDING COLLETS 5/16" TO 3/4" APPROXIMATE RANGE (2

  • La Puente, California, United States
  • Jan 30th
Halogen Machine Light/Lamp Flex-Shaft-NEW

Halogen Machine Light/Lamp Flex-Shaft-NEW

  • Chino, California, United States
  • Jan 30th
VINTAGE STERLING FENCE WIRE AND HOLDER NEAR 10 POUNDS

VINTAGE STERLING FENCE WIRE AND HOLDER NEAR 10 POUNDS

  • Franklin, North Carolina, United States
  • Jan 30th
20' Twin torque hose set. 40,000 PSI. With T-630 Enerpac quick couplers sets

20' Twin torque hose set. 40,000 PSI. With T-630 Enerpac quick couplers sets

  • Heber City, Utah, United States
  • Jan 30th
TABLE SAW PLATFORM/ METAL/ USED

TABLE SAW PLATFORM/ METAL/ USED

  • Plymouth, Pennsylvania, United States
  • Jan 30th

People who viewed this item also vieved

Knee, Machinist Knee, 6' x 6' x 6" Heavy Duty Cast Iron Right Angle Knee

Knee, Machinist Knee, 6' x 6' x 6" Heavy Duty Cast Iron Right Angle Knee

  • Saunderstown, Rhode Island, United States
  • Jun 3rd
Machinist Tool Steel Knee 2-15/16" x 2-7/16" x 3-3/32", (23) 1/4-20 Tapped Holes

Machinist Tool Steel Knee 2-15/16" x 2-7/16" x 3-3/32", (23) 1/4-20 Tapped Holes

  • Saunderstown, Rhode Island, United States
  • Jun 3rd
8" FACE PLATE FOR SUPER SPACER ETC... STK 8277

8" FACE PLATE FOR SUPER SPACER ETC... STK 8277

  • Wadley, Alabama, United States
  • Jun 3rd
NOS Royal BOWERS UK 4 Mt Live Center Lathe TAPER TURNING ATTACHMENT #WL14.5.4

NOS Royal BOWERS UK 4 Mt Live Center Lathe TAPER TURNING ATTACHMENT #WL14.5.4

  • Perth, Ontario, Canada
  • Jun 4th
NOS Royal BOWERS UK 3 Mt Live Center Lathe TAPER TURNING ATTACHMENT #WL14.4.3

NOS Royal BOWERS UK 3 Mt Live Center Lathe TAPER TURNING ATTACHMENT #WL14.4.3

  • Perth, Ontario, Canada
  • Jun 4th
USED GORHAM #20 JARNO LATHE DEAD CENTER #81859 (2.50" Point Diameter)

USED GORHAM #20 JARNO LATHE DEAD CENTER #81859 (2.50" Point Diameter)

  • Fairfield, Iowa, United States
  • Jun 4th
LYNDEX-NIKKEN 550-006 6' 5C Step Collet

LYNDEX-NIKKEN 550-006 6' 5C Step Collet

  • Duncan, South Carolina, United States
  • Jun 6th
LYNDEX-NIKKEN 550-005 5' 5C Step Collet

LYNDEX-NIKKEN 550-005 5' 5C Step Collet

  • Duncan, South Carolina, United States
  • Jun 6th
EAGLE ROCK A1-51-5C-4000-2500 Rock 5C Expanding Collet

EAGLE ROCK A1-51-5C-4000-2500 Rock 5C Expanding Collet

  • Duncan, South Carolina, United States
  • Jun 6th
De-Sta-Co DE-STA-CO 325-SS Hold-Down Action Clamp

De-Sta-Co DE-STA-CO 325-SS Hold-Down Action Clamp

  • USA, United States
  • Jun 7th
Small Parts 1018 Steel T-Slot Nut, Black Oxide Finish, Tapped Through, 5/16"-18

Small Parts 1018 Steel T-Slot Nut, Black Oxide Finish, Tapped Through, 5/16"-18

  • USA, United States
  • Jun 7th
Small Parts 1018 Steel T-Slot Nut, Black Oxide Finish, Grade 8, Tapped Through,

Small Parts 1018 Steel T-Slot Nut, Black Oxide Finish, Grade 8, Tapped Through,

  • USA, United States
  • Jun 7th
LATHE FACE DOG PLATE 2-8 THREAD MOUNT 8 INCH DIAMETER

LATHE FACE DOG PLATE 2-8 THREAD MOUNT 8 INCH DIAMETER

  • Sioux Falls, South Dakota, United States
  • Jun 8th
LATHE FACE DOG PLATE 1 1/2-8 THREAD MOUNT 8 INCH DIAMETER

LATHE FACE DOG PLATE 1 1/2-8 THREAD MOUNT 8 INCH DIAMETER

  • Sioux Falls, South Dakota, United States
  • Jun 8th
8 inch, 4 jaw lathe chuck # 564 union mfg- co. new britain conn usa

8 inch, 4 jaw lathe chuck # 564 union mfg- co. new britain conn usa

  • Greenfield, Indiana, United States
  • Jun 8th
Palmgren 9638955 Adjustable jack screw, 1.693 to 2.402"

Palmgren 9638955 Adjustable jack screw, 1.693 to 2.402"

  • Wayland, Michigan, United States
  • Jun 8th
Palmgren 9618422 Machine vise w/base, 4.5"

Palmgren 9618422 Machine vise w/base, 4.5"

  • Wayland, Michigan, United States
  • Jun 8th
Palmgren 9638956 Adjustable jack screw, 2.599 to 3.150"

Palmgren 9638956 Adjustable jack screw, 2.599 to 3.150"

  • Wayland, Michigan, United States
  • Jun 8th
Liquitex Basics Acrylic Paint 250ml-Cobalt Blue Hue

Liquitex Basics Acrylic Paint 250ml-Cobalt Blue Hue

  • Hickory Hills, Illinois, United States
  • Jun 23rd
Spiral Shawl Pin-Tiger Ebony

Spiral Shawl Pin-Tiger Ebony

  • Hickory Hills, Illinois, United States
  • Jun 23rd
Komet ABS 20 ER 11 Collet Chuck UA3302780 (LOC2378B)

Komet ABS 20 ER 11 Collet Chuck UA3302780 (LOC2378B)

  • Laingsburg, Michigan, United States
  • Jun 23rd
LOT OF NEW & USED USA MADE COMBINATION DRILL AND COUNTERSINKS CENTERDRILLS #8

LOT OF NEW & USED USA MADE COMBINATION DRILL AND COUNTERSINKS CENTERDRILLS #8

  • Xenia, Ohio, United States
  • Oct 20th
NEW 4" MEDIUM GRIT REPLACEMENT STONES FOR 2833 ENGINE CYLINDER HONE MADE IN USA

NEW 4" MEDIUM GRIT REPLACEMENT STONES FOR 2833 ENGINE CYLINDER HONE MADE IN USA

  • Xenia, Ohio, United States
  • Oct 20th
Spi 30-440-2 Digital Caliper

Spi 30-440-2 Digital Caliper

  • Glenview, Illinois, United States
  • Oct 20th
TROYKE 15" ROTARY TABLE

TROYKE 15" ROTARY TABLE

  • Rush, New York, United States
  • Oct 31st
VINTAGE PALMGREN ROTARY TABLE 8" MILL LATHE MACHINIST CROSS SLIDE METALWORKING

VINTAGE PALMGREN ROTARY TABLE 8" MILL LATHE MACHINIST CROSS SLIDE METALWORKING

  • Painesville, Ohio, United States
  • Nov 1st
Haas HRT-210 Programmable Rotary Table

Haas HRT-210 Programmable Rotary Table

  • Minneapolis, Minnesota, United States
  • Nov 1st

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies