Lot 50 Parker 70 Duro Nitrile O-Rings, 7/8" ID x 3/32" CS AS568-118 2500-0028-01, US $7.99 – Picture 0

Lot 50 Parker 70 Duro Nitrile O-Rings, 7/8" ID x 3/32" CS AS568-118 2500-0028-01, US $7.99 – Picture 1

Lot 50 Parker 70 Duro Nitrile O-Rings, 7/8" ID x 3/32" CS AS568-118 2500-0028-01, US $7.99 – Picture 2

Lot 50 Parker 70 Duro Nitrile O-Rings, 7/8" ID x 3/32" CS AS568-118 2500-0028-01, US $7.99 – Picture 3

Lot 50 Parker 70 Duro Nitrile O-Rings, 7/8" ID x 3/32" CS AS568-118 2500-0028-01, US $7.99 – Picture 4

Lot 50 Parker 70 Duro Nitrile O-Rings, 7/8" ID x 3/32" CS AS568-118 2500-0028-01, US $7.99 – Picture 5

Lot 50 Parker 70 Duro Nitrile O-Rings, 7/8" ID x 3/32" CS AS568-118 2500-0028-01, US $7.99 – Picture 6

Lot 50 Parker 70 Duro Nitrile O-rings, 7/8" Id X 3/32" Cs As568-118 2500-0028-01

US $7.99

Springfield, Tennessee, United States
Jan 29th

Open on mobile:
QR code

2114A3C.07 New Parker 70 Duro Nitrile O-Rings, 7/8" Inside Diameter x 3/32" Cross Section, Parker Part Number AS568-118 N70R, Customer Part Number 2500-0028-01, Atlantic India Part Number OR-118BN70, or OR118BN70; Also AS118-70N. Each bid quantity is for a Lot of Fifty (50) O-Rings. You may bid / buy any number of lots, up to the total quantity available above. These were acquired at a salvage freight sale recently, and they were brand new in the original factory bags. We repackaged them in heavy Ziplok bags for resale. According to various online sources: AS118-70N Nitrile O-Ring (AS568-118) Nitrile is the most widely used elastomer in the seal and o-ring industry. Its popularity results from the ability to sustain performance across a wide temperature range (-22F to 212F), and its excellent resistance to petroleum-based products. Additionally, nitrile material exhibits superior compression set, tear and abrasion resistance. Nitrile is often referred to as Buna (Buna-N) and NBR. The nitrile AS118-70N o-ring can be referenced in one of four ways: Mostly commonly, the industry standard AS568 “dash” number (AS568-118) Standard dimensions: (CS 0.103" x ID 0.862") Metric dimensions: (CS 2.62 x ID 21.89) Nominal fractional dimensions: (CS 3/32 " x ID 7/8") The final consideration for an o-ring after size and material type is the durometer. Durometer is an industry standard measurement for a material’s hardness. Most often for rubber seals, durometer is measured and listed in accordance with the “Shore A” scale. Typical durometers for standard rubber seals are 70, 75 and 90, depending on the material. A higher number indicates a harder material. Durometer is also generally stated and accepted with a “+/- 5” tolerance. For nitrile o-rings, standard nominal durometers are 70 and 90. Primary Uses: O-Rings, rubber seals and custom molded rubber components for: Standard Oil resistant applications Custom Low temperature applications Specialized Fuel systems, automotive, marine, and aircraft General Industrial Use

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Type	Hydraulic
Model	AS568-118 N70R
Brand	Parker
MPN	OR-118BN70