+ Post new Ad
LOT LIVE CENTERS DEAD CENTER AND SLEEVE NAKANE READY TOOL, US $50.00 – Picture 0
LOT LIVE CENTERS DEAD CENTER AND SLEEVE NAKANE READY TOOL, US $50.00 – Picture 1
LOT LIVE CENTERS DEAD CENTER AND SLEEVE NAKANE READY TOOL, US $50.00 – Picture 2
LOT LIVE CENTERS DEAD CENTER AND SLEEVE NAKANE READY TOOL, US $50.00 – Picture 3
LOT LIVE CENTERS DEAD CENTER AND SLEEVE NAKANE READY TOOL, US $50.00 – Picture 4
LOT LIVE CENTERS DEAD CENTER AND SLEEVE NAKANE READY TOOL, US $50.00 – Picture 0
LOT LIVE CENTERS DEAD CENTER AND SLEEVE NAKANE READY TOOL, US $50.00 – Picture 1
LOT LIVE CENTERS DEAD CENTER AND SLEEVE NAKANE READY TOOL, US $50.00 – Picture 2
LOT LIVE CENTERS DEAD CENTER AND SLEEVE NAKANE READY TOOL, US $50.00 – Picture 3
LOT LIVE CENTERS DEAD CENTER AND SLEEVE NAKANE READY TOOL, US $50.00 – Picture 4

Lot Live Centers Dead Center And Sleeve Nakane Ready Tool

US $50.00

  • Baldwinville, Massachusetts, United States
  • Jan 30th
Open on mobile:
QR code
 Up for sale is a small lot of lathe tooling. 1 = Nakane # 4 mt live center.  Item has blunted tip see photo. Item has nicks and dings from use. 1 =  The Ready Tool company R-24 HD live bearing center 1 1/2" shank.  Item has smll nick at tip and dents and ding from use.  Item turns freely but could use grease. 1 = D115-DJF # 5 mt   dead center item has ding and dents from used good usable condition. 1 = Sleeve 4 to 6 MT. Item has dings and dents from use.  Item is in good usable condition.
Condition Used :
An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes “See item description”

Directions

Similar products from Live Centers

Royal Heavy Duty Spindle Type Live Center MT#4 10104

Royal Heavy Duty Spindle Type Live Center MT#4 10104

  • Carrollton, Ohio, United States
  • Jan 30th
MT4 Special Live Center

MT4 Special Live Center

  • Chino, California, United States
  • Jan 30th
MT3 Dead Center

MT3 Dead Center

  • Chino, California, United States
  • Jan 30th
#4 MORSE TAPER LIGHT DUTY LIVE CENTER

#4 MORSE TAPER LIGHT DUTY LIVE CENTER

  • Cadiz, Kentucky, United States
  • Jan 30th
Silver Tone Black Alloy MT2 Morse TaPer Lathes Dead Center SS

Silver Tone Black Alloy MT2 Morse TaPer Lathes Dead Center SS

  • Shenzhen, China
  • Jan 30th
USED #7 BROWN & SHARPE B&S DEAD LATHE CENTER (.750" Point Diameter)

USED #7 BROWN & SHARPE B&S DEAD LATHE CENTER (.750" Point Diameter)

  • Fairfield, Iowa, United States
  • Jan 30th
Riten Live Center 9" Taper

Riten Live Center 9" Taper

  • Portland, Oregon, United States
  • Jan 30th
ROTOR Super C7 Super Heavy Duty Live Center #7MT Morse Taper

ROTOR Super C7 Super Heavy Duty Live Center #7MT Morse Taper

  • Springfield, Illinois, United States
  • Jan 30th
Perfection Free Live Center - Mech . Dev. Corp Model 4-5-M

Perfection Free Live Center - Mech . Dev. Corp Model 4-5-M

  • Schenectady, New York, United States
  • Jan 30th
The "Nielsen" 3" Diameter Lathe Live Center - Tapered Shank

The "Nielsen" 3" Diameter Lathe Live Center - Tapered Shank

  • Schenectady, New York, United States
  • Jan 30th
USED #2MT LATHE DEAD CENTER with CUT OUT (.712" Point Diameter)

USED #2MT LATHE DEAD CENTER with CUT OUT (.712" Point Diameter)

  • Fairfield, Iowa, United States
  • Jan 30th
USED BROWN & SHARPE #10 LATHE DEAD CENTER #10 B&S (1.293" Point Diameter)

USED BROWN & SHARPE #10 LATHE DEAD CENTER #10 B&S (1.293" Point Diameter)

  • Fairfield, Iowa, United States
  • Jan 30th
Bemato 5.91" MT5 Bull Nose Live Center, 2" Point Diameter | (IM1)

Bemato 5.91" MT5 Bull Nose Live Center, 2" Point Diameter | (IM1)

  • Saint Louis, Missouri, United States
  • Jan 30th
Bemato 2.44" MT2 Bull Nose Live Center, 1/2" Point Diameter | (IM3) FRA

Bemato 2.44" MT2 Bull Nose Live Center, 1/2" Point Diameter | (IM3) FRA

  • Saint Louis, Missouri, United States
  • Jan 30th
Riten Regal Live Point centers New Live Center MT# 5 USA 48605 TIR ± .00005

Riten Regal Live Point centers New Live Center MT# 5 USA 48605 TIR ± .00005

  • Carrollton, Ohio, United States
  • Jan 30th
NOS ROHM Germany Morse Taper 4 LIVE Center 600 Slim Style MT4 MT 4 Size 08 #135

NOS ROHM Germany Morse Taper 4 LIVE Center 600 Slim Style MT4 MT 4 Size 08 #135

  • Perth, Ontario, Canada
  • Jan 30th
Riten Live Multi Point centers New Live Center MT# 4 USA 60264

Riten Live Multi Point centers New Live Center MT# 4 USA 60264

  • Carrollton, Ohio, United States
  • Jan 30th
USED CARBIDE TIPPED #14 JARNO LATHE DEAD CENTER (1.751" Point Diameter)

USED CARBIDE TIPPED #14 JARNO LATHE DEAD CENTER (1.751" Point Diameter)

  • Fairfield, Iowa, United States
  • Jan 30th
Riten Live Tracer Point centers New Live Center MT #5 USA 44905

Riten Live Tracer Point centers New Live Center MT #5 USA 44905

  • Carrollton, Ohio, United States
  • Jan 30th
Riten Interchangeable Live Point centers New Live Center MT# 5 USA 49505

Riten Interchangeable Live Point centers New Live Center MT# 5 USA 49505

  • Carrollton, Ohio, United States
  • Jan 30th

People who viewed this item also vieved

HHIP 3900-0007 11 Piece R8 Collet Set 1/8-3/4 Inch By 16THS

HHIP 3900-0007 11 Piece R8 Collet Set 1/8-3/4 Inch By 16THS

  • Avalon, California, United States
  • May 25th
USED HARDINGE 5C EMERGENCY STEP COLLET I.D. .250 O.D. 2.373

USED HARDINGE 5C EMERGENCY STEP COLLET I.D. .250 O.D. 2.373

  • Fairfield, Iowa, United States
  • May 25th
USED HARDINGE 5C EMERGENCY STEP COLLET I.D. .875 O.D. 2.771

USED HARDINGE 5C EMERGENCY STEP COLLET I.D. .875 O.D. 2.771

  • Fairfield, Iowa, United States
  • May 25th
Northwestern #38503 Clamping Stud 5/8 x 2-1/2" USA

Northwestern #38503 Clamping Stud 5/8 x 2-1/2" USA

  • Crystal Lake, Illinois, United States
  • May 25th
Northwestern #20005 Knurled Head Screw 1/2-13 x 3" USA

Northwestern #20005 Knurled Head Screw 1/2-13 x 3" USA

  • Crystal Lake, Illinois, United States
  • May 25th
Northwestern #25106 Quarter Turn Screw 1/2-13 X 2-1/4" USA

Northwestern #25106 Quarter Turn Screw 1/2-13 X 2-1/4" USA

  • Crystal Lake, Illinois, United States
  • May 25th
Bison Integral Drill Chuck BT40 7656 -40-1/32-1/2

Bison Integral Drill Chuck BT40 7656 -40-1/32-1/2

  • Plainville, Connecticut, United States
  • May 27th
8" 3 JAW LATHE CHUCK 2 PIECE JAWS L0 MOUNT WITH SPANNER WRENCH

8" 3 JAW LATHE CHUCK 2 PIECE JAWS L0 MOUNT WITH SPANNER WRENCH

  • Chehalis, Washington, United States
  • May 27th
10-101-2500 Steel Machine Gator Scroll Buck Chuck 25" Dia GT250-3A

10-101-2500 Steel Machine Gator Scroll Buck Chuck 25" Dia GT250-3A

  • Phoenix, Arizona, United States
  • May 27th
LOT OF 11 MICRO TOGGLE CLAMPS DE.STA.CO CARR LANE MODEL # 34101 CL-250-VTC

LOT OF 11 MICRO TOGGLE CLAMPS DE.STA.CO CARR LANE MODEL # 34101 CL-250-VTC

  • Ellington, New York, United States
  • May 27th
SIX DESTACO 201 MANUAL HOLD DOWN TOGGLE CLAMPS

SIX DESTACO 201 MANUAL HOLD DOWN TOGGLE CLAMPS

  • Farmington, Michigan, United States
  • May 27th
SET OF MITEE-BITE CAM LOCK MILLING CLAMP & T-SLOT SETS MB-8 TSN-687

SET OF MITEE-BITE CAM LOCK MILLING CLAMP & T-SLOT SETS MB-8 TSN-687

  • Ellington, New York, United States
  • May 27th
Reed Manufacturing Co no.60 Pipe Vise

Reed Manufacturing Co no.60 Pipe Vise

  • Saint Petersburg, Florida, United States
  • May 28th
PRECISION MILLING VICE-2 WAY TILTING & SWIVEL MODEL JAW WIDTH- 2 INCHES (50MM)

PRECISION MILLING VICE-2 WAY TILTING & SWIVEL MODEL JAW WIDTH- 2 INCHES (50MM)

  • DELHI, DELHI, India
  • May 28th
1" X 5 FLUTE CARBIDE COATED FINISH END MILL PERFECT FOR HARD MATERIALS

1" X 5 FLUTE CARBIDE COATED FINISH END MILL PERFECT FOR HARD MATERIALS

  • Ventura, California, United States
  • May 28th
Karl Suss PH400 Micropositioner w/ X/Y/Z Controller - For Parts or Repair (B)

Karl Suss PH400 Micropositioner w/ X/Y/Z Controller - For Parts or Repair (B)

  • Loveland, Colorado, United States
  • Jun 5th
Karl Suss PH400 Micropositioner w/ X/Y/Z Controller - For Parts or Repair (C)

Karl Suss PH400 Micropositioner w/ X/Y/Z Controller - For Parts or Repair (C)

  • Loveland, Colorado, United States
  • Jun 5th
Karl Suss PH150 Manual Micropositioner, X/Y/Z

Karl Suss PH150 Manual Micropositioner, X/Y/Z

  • Loveland, Colorado, United States
  • Jun 5th
Machinist Made Vise +2 x V or VEE Blocks Tool Lot

Machinist Made Vise +2 x V or VEE Blocks Tool Lot

  • Valparaiso, Indiana, United States
  • Jun 9th
Cross Compound Slide T-Slot Table Milling Drilling Sliding 5-5/8 x 12-1/8” NR

Cross Compound Slide T-Slot Table Milling Drilling Sliding 5-5/8 x 12-1/8” NR

  • Hamlet, Indiana, United States
  • Jun 9th
Milling Machine 10" Rotary Face Plate or Lathe Face Plate Wood Box & Accessories

Milling Machine 10" Rotary Face Plate or Lathe Face Plate Wood Box & Accessories

  • Fremont, New Hampshire, United States
  • Jun 9th
Stand Alone CNC Rotary Table/Indexer

Stand Alone CNC Rotary Table/Indexer

  • Surrey, British Columbia, Canada
  • Jun 9th
Brown and Sharpe V Blocks

Brown and Sharpe V Blocks

  • Fairborn, Ohio, United States
  • Jun 9th
Eclipse No. 31 Toolmaker's V Blocks Nice Condition Machinist

Eclipse No. 31 Toolmaker's V Blocks Nice Condition Machinist

  • Quakertown, Pennsylvania, United States
  • Jun 9th
Clearview Mini Art Set-Color Marker 12pc

Clearview Mini Art Set-Color Marker 12pc

  • Hickory Hills, Illinois, United States
  • Jun 12th
Funtime Stamp Set-

Funtime Stamp Set-

  • Hickory Hills, Illinois, United States
  • Jun 12th
"Dreamz Fixed Circular Needles 32""-Size 13/9mm"

"Dreamz Fixed Circular Needles 32""-Size 13/9mm"

  • Hickory Hills, Illinois, United States
  • Jun 12th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies