+ Post new Ad
LOT OF 26 SIDE AND FACE MILLING CUTTERS WITH SLITTING CUTTERS, US $148.00 – Picture 0
LOT OF 26 SIDE AND FACE MILLING CUTTERS WITH SLITTING CUTTERS, US $148.00 – Picture 1
LOT OF 26 SIDE AND FACE MILLING CUTTERS WITH SLITTING CUTTERS, US $148.00 – Picture 2
LOT OF 26 SIDE AND FACE MILLING CUTTERS WITH SLITTING CUTTERS, US $148.00 – Picture 3
LOT OF 26 SIDE AND FACE MILLING CUTTERS WITH SLITTING CUTTERS, US $148.00 – Picture 4
LOT OF 26 SIDE AND FACE MILLING CUTTERS WITH SLITTING CUTTERS, US $148.00 – Picture 5
LOT OF 26 SIDE AND FACE MILLING CUTTERS WITH SLITTING CUTTERS, US $148.00 – Picture 6
LOT OF 26 SIDE AND FACE MILLING CUTTERS WITH SLITTING CUTTERS, US $148.00 – Picture 7
LOT OF 26 SIDE AND FACE MILLING CUTTERS WITH SLITTING CUTTERS, US $148.00 – Picture 8
LOT OF 26 SIDE AND FACE MILLING CUTTERS WITH SLITTING CUTTERS, US $148.00 – Picture 9
LOT OF 26 SIDE AND FACE MILLING CUTTERS WITH SLITTING CUTTERS, US $148.00 – Picture 0
LOT OF 26 SIDE AND FACE MILLING CUTTERS WITH SLITTING CUTTERS, US $148.00 – Picture 1
LOT OF 26 SIDE AND FACE MILLING CUTTERS WITH SLITTING CUTTERS, US $148.00 – Picture 2
LOT OF 26 SIDE AND FACE MILLING CUTTERS WITH SLITTING CUTTERS, US $148.00 – Picture 3
LOT OF 26 SIDE AND FACE MILLING CUTTERS WITH SLITTING CUTTERS, US $148.00 – Picture 4
LOT OF 26 SIDE AND FACE MILLING CUTTERS WITH SLITTING CUTTERS, US $148.00 – Picture 5
LOT OF 26 SIDE AND FACE MILLING CUTTERS WITH SLITTING CUTTERS, US $148.00 – Picture 6
LOT OF 26 SIDE AND FACE MILLING CUTTERS WITH SLITTING CUTTERS, US $148.00 – Picture 7
LOT OF 26 SIDE AND FACE MILLING CUTTERS WITH SLITTING CUTTERS, US $148.00 – Picture 8
LOT OF 26 SIDE AND FACE MILLING CUTTERS WITH SLITTING CUTTERS, US $148.00 – Picture 9

Lot Of 26 Side And Face Milling Cutters With Slitting Cutters

US $148.00

  • Bryan, Ohio, United States
  • Jan 30th
Open on mobile:
QR code
For your bidding pleasure is a lot of 26 milling cutters including slitting cutters, straight tooth side & face milling cutters, and 1 dovetail milling cutters.  As far as I can tell these are all made in the U.S.A., and are HSS.  The mounting hole is 1" for all of the cutters with the exception of the dovetail cutter which is 1/2".  I hope that I have described these correctly as I do not know much about these so you are buying what is shown in the pictures. A list of manufacturers for these cutters includes the following:  Morse, Gorham, B&S, Dormer, P&W, GTD, and National.  Some of them I could not read the manufacturer so I have listed only those names that I could make out. The list of sizes that I could make out are as follows:  6x3/4, 5x3/4, 4x3/4, 4x1, 4x1/8, 4x1/4, 5x11/64, 5x.070, 4x5/64, 4x.240, 4x3/64, 3x.078, and 3x1/4.  I have only listed the sizes that I can insure are included in this lot, and I am not sure about what size the other 13 pieces are. I do not know a lot about these cutters, but I believe that most are in good condition, and are ready to go to work for you.  There is one cutter that does have a tooth missing as you can see from the pictures.  This is a no reserve auction so here is your opportunity to buy some very expensive tooling at a great price.  If you are interested in these please keep watching my future listings as I will be selling more milling tooling including slitting cutters, dovetail cutters, staggered/straight tooth cutters, side & face cutters, convex radius cutters, and involute gear cutters in future listings.  If you have any questions please feel free to ask, and I will do my best to answer them.
Condition Used :
An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes “One of the cutters does have a tooth missing as shown in pictures.”

Directions

Similar products from Tools for Milling Machines

Niagara Cutter 5/8 Carbide End Mill, 5Fl, TIALN, 3" OAL, EDP 62017-060

Niagara Cutter 5/8 Carbide End Mill, 5Fl, TIALN, 3" OAL, EDP 62017-060

  • Meadville, Pennsylvania, United States
  • Jan 30th
Atlas 7B Shaper With Vise 110v On Steel Stand Milling Key Machine

Atlas 7B Shaper With Vise 110v On Steel Stand Milling Key Machine

  • Millstadt, Illinois, United States
  • Jan 30th
BRIDGEPORT VERTICAL MILL W/ BRIDGEPORT SHAPING ATTACHMENT AND TOOLING KURT VISE

BRIDGEPORT VERTICAL MILL W/ BRIDGEPORT SHAPING ATTACHMENT AND TOOLING KURT VISE

  • Hopkins, Minnesota, United States
  • Jan 30th
1-1/2" INSERT MILL WIDAX-HEINLEIN 239.11.154 1" DIA SHANK LOT C9921

1-1/2" INSERT MILL WIDAX-HEINLEIN 239.11.154 1" DIA SHANK LOT C9921

  • Dayton, Ohio, United States
  • Jan 30th
4" DIAMETER FACEMILL WITH 1.25" PILOT MORE TOOLING LISTED FACE MILL LOT C10590

4" DIAMETER FACEMILL WITH 1.25" PILOT MORE TOOLING LISTED FACE MILL LOT C10590

  • Dayton, Ohio, United States
  • Jan 30th
1-1/2" DIA TRICUT TOOL INSERT MILL MER 150-125-63 1-1/4" SHANK LOT C9920

1-1/2" DIA TRICUT TOOL INSERT MILL MER 150-125-63 1-1/4" SHANK LOT C9920

  • Dayton, Ohio, United States
  • Jan 30th
CARBOLOY SECO 1" DIA INSERT MILL C106000 1" DIA SHANK LOT C9928

CARBOLOY SECO 1" DIA INSERT MILL C106000 1" DIA SHANK LOT C9928

  • Dayton, Ohio, United States
  • Jan 30th
KENNAMETAL 1-1/2" DIA. INSERT MILL KISR15TP30 LOT C9943

KENNAMETAL 1-1/2" DIA. INSERT MILL KISR15TP30 LOT C9943

  • Dayton, Ohio, United States
  • Jan 30th
KENNAMETAL INSERT MILL 345233R00 2770CE8 CFS-5125 LOT C9917

KENNAMETAL INSERT MILL 345233R00 2770CE8 CFS-5125 LOT C9917

  • Dayton, Ohio, United States
  • Jan 30th
KENNAMETAL 1-1/4" INSERT MILL M1D125E 1803W195 42 1-1/4" DIA SHANK LOT C9924

KENNAMETAL 1-1/4" INSERT MILL M1D125E 1803W195 42 1-1/4" DIA SHANK LOT C9924

  • Dayton, Ohio, United States
  • Jan 30th
GL HUYETT WWGDISPMKZC58 Machine Key Kit,58 PC

GL HUYETT WWGDISPMKZC58 Machine Key Kit,58 PC

  • Joliet, Illinois, United States
  • Jan 30th
SUMITOMO 2.5" DIAMETER FACEMILL WITH 1" PILOT WEM525EX FACE MILL LOT C10591

SUMITOMO 2.5" DIAMETER FACEMILL WITH 1" PILOT WEM525EX FACE MILL LOT C10591

  • Dayton, Ohio, United States
  • Jan 30th
Acer 3VK Vertical Mill New Crossfeed Leadscrew/Longitudinal Feedscrew/2Way Nut

Acer 3VK Vertical Mill New Crossfeed Leadscrew/Longitudinal Feedscrew/2Way Nut

  • Griffith, Indiana, United States
  • Jan 30th
LOT OF 14 MILLING SLITTING CUTTERS AND SIDE & FACE CUTTERS

LOT OF 14 MILLING SLITTING CUTTERS AND SIDE & FACE CUTTERS

  • Bryan, Ohio, United States
  • Jan 30th
10" x 10" Yuasa Model 550-020 Cross Sliding Rotary Table

10" x 10" Yuasa Model 550-020 Cross Sliding Rotary Table

  • Huntington Park, California, United States
  • Jan 30th
ROMAI RIGHT ANGLE HEAD WBK BT50/ER20 COLLET CHUCK, 17" REACH

ROMAI RIGHT ANGLE HEAD WBK BT50/ER20 COLLET CHUCK, 17" REACH

  • North Springfield, Vermont, United States
  • Jan 30th
NEW SURPLUS LOVEJOY TOOL 5.00" LEFT HAND ROTATION FACE MILL CA5GTAL6-1L (SPE-43)

NEW SURPLUS LOVEJOY TOOL 5.00" LEFT HAND ROTATION FACE MILL CA5GTAL6-1L (SPE-43)

  • Fairfield, Iowa, United States
  • Jan 30th
BRIDGEPORT VERTICAL MILL W/ 6 " KURT VICE MACHINE VICE BRIDGEPORT POWER FEED

BRIDGEPORT VERTICAL MILL W/ 6 " KURT VICE MACHINE VICE BRIDGEPORT POWER FEED

  • Hopkins, Minnesota, United States
  • Jan 30th
BRIDGEPORT VERTICAL MILL W/ 6" MACHINE VICE BRIDGEPORT HEAD

BRIDGEPORT VERTICAL MILL W/ 6" MACHINE VICE BRIDGEPORT HEAD

  • Hopkins, Minnesota, United States
  • Jan 30th
ORIGINAL BRIDGEPORT QUILL MASTER TYPE JA MILLING ATTACHMENT with EXTRA COLLET

ORIGINAL BRIDGEPORT QUILL MASTER TYPE JA MILLING ATTACHMENT with EXTRA COLLET

  • Ontario, California, United States
  • Jan 30th

People who viewed this item also vieved

Vintage Green Bay Drive Calk Co.Bulldog No. 2R Tool Holder

Vintage Green Bay Drive Calk Co.Bulldog No. 2R Tool Holder

  • Pontotoc, Mississippi, United States
  • Mar 2nd
J. H. WILLIAMS NO. 0-L LATHE TOOL HOLDER Shank is 3/8 x 7/8 x 5

J. H. WILLIAMS NO. 0-L LATHE TOOL HOLDER Shank is 3/8 x 7/8 x 5

  • Pontotoc, Mississippi, United States
  • Mar 2nd
CNC Lathe

CNC Lathe

  • Russell, Kentucky, United States
  • Mar 2nd
New Dunmore 12-022 Post Grinder Motor w/ Cord 1hp, 3ph, Frame C56Y SKU 3.15-1112

New Dunmore 12-022 Post Grinder Motor w/ Cord 1hp, 3ph, Frame C56Y SKU 3.15-1112

  • Tacoma, Washington, United States
  • Mar 12th
NICE! FARREL-SELLERS #70 to 1" DRILL POINT SHARPENING GRINDER - #1G-A

NICE! FARREL-SELLERS #70 to 1" DRILL POINT SHARPENING GRINDER - #1G-A

  • Covina, California, United States
  • Mar 12th
star wheel dresser bench grinder grinding rural king cast iron vintage old tool

star wheel dresser bench grinder grinding rural king cast iron vintage old tool

  • Farmington, Missouri, United States
  • Mar 12th
Geka Hydracrop 55/A Press, Year 1996, 4 1/2" x 4 1/2" x 3/8" - Good Cond.

Geka Hydracrop 55/A Press, Year 1996, 4 1/2" x 4 1/2" x 3/8" - Good Cond.

  • Watertown, Connecticut, United States
  • Mar 12th
Machinists Lathe Jacobs Drill Chuck # 6A - 33 Taper 0 - 1/2 With Key

Machinists Lathe Jacobs Drill Chuck # 6A - 33 Taper 0 - 1/2 With Key

  • Carver, Massachusetts, United States
  • Mar 12th
POP PB2500 Cordless Aircraft riveter w/ New Jaws and Batteries

POP PB2500 Cordless Aircraft riveter w/ New Jaws and Batteries

  • Columbus, Ohio, United States
  • Mar 12th
115 PIECE USA MADE DRILL BIT SET W/ HUOT METAL CASE

115 PIECE USA MADE DRILL BIT SET W/ HUOT METAL CASE

  • Toms River, New Jersey, United States
  • Mar 26th
5 PC SET BILZ #2 TAP METRIC COLLETS ADAPTER COLLET MORE LISTED LOT C10221

5 PC SET BILZ #2 TAP METRIC COLLETS ADAPTER COLLET MORE LISTED LOT C10221

  • Dayton, Ohio, United States
  • Mar 26th
HeliCoil 8522 Small adapter power thread insert kit

HeliCoil 8522 Small adapter power thread insert kit

  • Salt Lake City, Utah, United States
  • Mar 26th
Heavy Duty Eye Bolt w/Nut 1.75" opening

Heavy Duty Eye Bolt w/Nut 1.75" opening

  • Dewitt, Virginia, United States
  • May 17th
1998 LVD-Strippit Delta 1250 CNC Turret Punch Press

1998 LVD-Strippit Delta 1250 CNC Turret Punch Press

  • Flemington, New Jersey, United States
  • May 18th
Sheet Metal Machine Shear, Brake, & Roll Machine 16 Gauge Capacity, 52" 3 in 1

Sheet Metal Machine Shear, Brake, & Roll Machine 16 Gauge Capacity, 52" 3 in 1

  • Temperance, Michigan, United States
  • May 19th
Davis Beveling-Deburring-Chamfering-Edging Machine-Dumore grinder-1

Davis Beveling-Deburring-Chamfering-Edging Machine-Dumore grinder-1

  • Columbus, Nebraska, United States
  • Jun 24th
DYNABRADE - BELT SANDER - DYNAFILE

DYNABRADE - BELT SANDER - DYNAFILE

  • Mohnton, Pennsylvania, United States
  • Jun 24th
Davis Beveling-Deburring-Chamfering-Edging Machine-Dumore grinder-3

Davis Beveling-Deburring-Chamfering-Edging Machine-Dumore grinder-3

  • Columbus, Nebraska, United States
  • Jun 25th
Sodick K3HN EDM HOLE DRILLER, CNC, 110k New Today, ettco filtration, bed filter

Sodick K3HN EDM HOLE DRILLER, CNC, 110k New Today, ettco filtration, bed filter

  • Harrison, New Jersey, United States
  • May 25th
System 3R Electrode Holder RAM-TYPE EDM, on 5C Shank, very clean

System 3R Electrode Holder RAM-TYPE EDM, on 5C Shank, very clean

  • Harrison, New Jersey, United States
  • May 25th
Japax LDM35 CNC Wire EDM Machine

Japax LDM35 CNC Wire EDM Machine

  • Saint-Laurent, Quebec, Canada
  • May 25th
20" Thrt 12" H Rockwell-Delta 28-345 VERTICAL BAND SAW, Single Phase,2 HP Vari-D

20" Thrt 12" H Rockwell-Delta 28-345 VERTICAL BAND SAW, Single Phase,2 HP Vari-D

  • Harrison, New Jersey, United States
  • May 25th
16" Thrt 12" H DoAll 1612-0 VERTICAL BAND SAW, Vari-Speed, Blade Welder, Tilt Tb

16" Thrt 12" H DoAll 1612-0 VERTICAL BAND SAW, Vari-Speed, Blade Welder, Tilt Tb

  • Harrison, New Jersey, United States
  • May 25th
24" Thrt 13" H Grob 4V-24 VERTICAL BAND SAW, VariSpeed,Tbl Feed,Blade Welder,3 H

24" Thrt 13" H Grob 4V-24 VERTICAL BAND SAW, VariSpeed,Tbl Feed,Blade Welder,3 H

  • Harrison, New Jersey, United States
  • May 25th
Conomatic 1-1/4" 4-Hi Automatic Screw Machine Cut-Off Machine

Conomatic 1-1/4" 4-Hi Automatic Screw Machine Cut-Off Machine

  • Long Beach, California, United States
  • May 26th
Conomatic 2-5/8" 4-Hi Automatic Screw Machine Cut-Off Machine

Conomatic 2-5/8" 4-Hi Automatic Screw Machine Cut-Off Machine

  • Long Beach, California, United States
  • May 26th
#OO Brown & Sharpe Circular Tool Post - NEW

#OO Brown & Sharpe Circular Tool Post - NEW

  • Iron River, Michigan, United States
  • May 26th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies