+ Post new Ad
Lot of (3) Southwick & Meister TD32HX .413 Hex Steel Bushing *New in Boxes, US $13 – Picture 0
Lot of (3) Southwick & Meister TD32HX .413 Hex Steel Bushing *New in Boxes, US $13 – Picture 0

Lot Of (3) Southwick & Meister Td32hx .413 Hex Steel Bushing *new In Boxes

US $13

  • Frisco, Texas, United States
  • Nov 8th
Open on mobile:
QR code
Lot of (3) Southwick & Meister TD32HX .413 Hex Steel Bushing *New in Original Boxes Refunds are offered within 14 days if the product is misrepresented or defective. Return shipping for these items will be paid by us, but if buyer decides that does not want the item and would like to return it, buyer pays the return shipping cost and original shipping cost. Item returned must be the same item shipped as identified by serial number or special UV/permanent markings and item must not been installed or used in any way. All non defective items returned could be subject to a 25% restocking fee.

Directions

Similar products from Sleeves

HHIP 3900-3922 Z Type Tool Holder Bushing, 1-1/2" OD x 1" ID

HHIP 3900-3922 Z Type Tool Holder Bushing, 1-1/2" OD x 1" ID

  • USA, United States
  • Nov 11th
QUICK DISCONNECT BUSHING, 2 7/16" BORE, 5 5/8" OD, FINISHED KEYWAY

QUICK DISCONNECT BUSHING, 2 7/16" BORE, 5 5/8" OD, FINISHED KEYWAY

  • Coffeyville, Kansas, United States
  • Nov 11th
BUSHING , FLANGE OD 6", BORE 2-7/8"

BUSHING , FLANGE OD 6", BORE 2-7/8"

  • Coffeyville, Kansas, United States
  • Nov 11th
QUICK DISCONNECT BUSHING, F2 1/8, 2 1/8" BORE, 6 5/8" OD, FINISHED KEYWAY

QUICK DISCONNECT BUSHING, F2 1/8, 2 1/8" BORE, 6 5/8" OD, FINISHED KEYWAY

  • Coffeyville, Kansas, United States
  • Nov 10th
QD QUICK DISCONNECT, BUSHING, E1-1/2, 1-1/2" BORE, 3/8 X 3/16" KEYWAY, 6" OD

QD QUICK DISCONNECT, BUSHING, E1-1/2, 1-1/2" BORE, 3/8 X 3/16" KEYWAY, 6" OD

  • Coffeyville, Kansas, United States
  • Nov 10th
QUICK DISCONNECT BUSHING, J3 3/8, 3 3/8" BORE, 7 1/4" OD, FINISHED KEYWAY

QUICK DISCONNECT BUSHING, J3 3/8, 3 3/8" BORE, 7 1/4" OD, FINISHED KEYWAY

  • Coffeyville, Kansas, United States
  • Nov 10th
BUSHING, FLANGE OD 4", BORE 1"

BUSHING, FLANGE OD 4", BORE 1"

  • Coffeyville, Kansas, United States
  • Nov 10th
BUSHING, A20 1" BORE, 5-3/8" OD, 2" L-B

BUSHING, A20 1" BORE, 5-3/8" OD, 2" L-B

  • Coffeyville, Kansas, United States
  • Nov 10th
QD BUSHING, FLANGE OD 4-3/8, BORE 2-1/4"

QD BUSHING, FLANGE OD 4-3/8, BORE 2-1/4"

  • Coffeyville, Kansas, United States
  • Nov 10th
QUICK DISCONNECT BUSHING, 2 3/8" BORE, 6 3/4" OD, FINISHED KEYWAY

QUICK DISCONNECT BUSHING, 2 3/8" BORE, 6 3/4" OD, FINISHED KEYWAY

  • Coffeyville, Kansas, United States
  • Nov 10th
Gates 2012 1.1/2 Taper-Lock Bushing, 1-1/2" Bore, 1.2" Length, 2.0" Max Bore

Gates 2012 1.1/2 Taper-Lock Bushing, 1-1/2" Bore, 1.2" Length, 2.0" Max Bore

  • USA, United States
  • Nov 8th
Gates QT 1.1/8 QT-Type Bushing, 1-1/8" Bore

Gates QT 1.1/8 QT-Type Bushing, 1-1/8" Bore

  • USA, United States
  • Nov 8th
Browning H 978 10 SPL B Split Taper Bushing Spline Bore

Browning H 978 10 SPL B Split Taper Bushing Spline Bore

  • USA, United States
  • Nov 8th
9 USED 3/4" ID x 1" OD MACHINIST HEADLESS PRESS FIT LINER DRILL BUSHINGS

9 USED 3/4" ID x 1" OD MACHINIST HEADLESS PRESS FIT LINER DRILL BUSHINGS

  • Fairfield, Iowa, United States
  • Nov 8th
Fenner Drives L04CON6S QC Connectors 1/4" (25 per pack)

Fenner Drives L04CON6S QC Connectors 1/4" (25 per pack)

  • USA, United States
  • Nov 8th
TB Woods 1210 TL121030MM Taper Lock Bushing, Cast Iron, 30 mm Bore, 1200 lbs/in

TB Woods 1210 TL121030MM Taper Lock Bushing, Cast Iron, 30 mm Bore, 1200 lbs/in

  • USA, United States
  • Nov 7th
TB Woods Type SDS SDS40MM Sure-Grip Bushing, Cast Iron, 40 mm Bore, 2.1875" OD,

TB Woods Type SDS SDS40MM Sure-Grip Bushing, Cast Iron, 40 mm Bore, 2.1875" OD,

  • USA, United States
  • Nov 7th
TB Woods Type SH SH58 Sure-Grip Bushing, Cast Iron, Inch, 0.625" Bore, 1.871"

TB Woods Type SH SH58 Sure-Grip Bushing, Cast Iron, Inch, 0.625" Bore, 1.871"

  • USA, United States
  • Nov 7th
TB Woods 1008 TL100834 Taper Lock Bushing, Cast Iron, Inch, 0.75" Bore, 1200

TB Woods 1008 TL100834 Taper Lock Bushing, Cast Iron, Inch, 0.75" Bore, 1200

  • USA, United States
  • Nov 7th
UNKNOWN BUSHING, SK7/8, OD 4"

UNKNOWN BUSHING, SK7/8, OD 4"

  • Coffeyville, Kansas, United States
  • Nov 7th

People who viewed this item also vieved

New Eaton Vickers 613-0289-001 Valve Block

New Eaton Vickers 613-0289-001 Valve Block

  • Leopolis, Wisconsin, United States
  • Jan 30th
New KMC Controls CTE-3007 Low Limit Control LARGE QUANTITY AVAILABLE

New KMC Controls CTE-3007 Low Limit Control LARGE QUANTITY AVAILABLE

  • Leopolis, Wisconsin, United States
  • Jan 30th
Valenite Loc-A-Dex HBN-111 Precision Boring Head Indexable Carbide Holder 2" Bod

Valenite Loc-A-Dex HBN-111 Precision Boring Head Indexable Carbide Holder 2" Bod

  • Lorain, Ohio, United States
  • Jan 30th
Sumitomo boreing bar A24-MDUNL4 FREE SHIPPING

Sumitomo boreing bar A24-MDUNL4 FREE SHIPPING

  • Twin Falls, Idaho, United States
  • Jan 30th
KENNAMETAL BT50 25MM DIA. ENDMILL HOLDER BT 50 END MILL EMH LOT C10569

KENNAMETAL BT50 25MM DIA. ENDMILL HOLDER BT 50 END MILL EMH LOT C10569

  • Dayton, Ohio, United States
  • Jan 30th
Lindex BT40 ER25 tool holders pair.

Lindex BT40 ER25 tool holders pair.

  • San Jose, California, United States
  • Jan 30th
G&L DAVIS CAT50 END MILL HOLDER #374-02163-50

G&L DAVIS CAT50 END MILL HOLDER #374-02163-50

  • Wadley, Alabama, United States
  • Jan 30th
(18) PIECE SET OF CAT50 TOOL HOLDERS TG100 COLLET CHUCKS LYNDEX PARLEC AND MORE

(18) PIECE SET OF CAT50 TOOL HOLDERS TG100 COLLET CHUCKS LYNDEX PARLEC AND MORE

  • Dayton, Ohio, United States
  • Jan 30th
U.S.A.! JACOBS K4 HEAVY DUTY #4 DRILL CHUCK KEY - SV

U.S.A.! JACOBS K4 HEAVY DUTY #4 DRILL CHUCK KEY - SV

  • Chino, California, United States
  • Jan 30th
1/32~3/8 INCH JT2 ULTRA PRECISION KEYLESS DRILL CHUCK (3700-0250)

1/32~3/8 INCH JT2 ULTRA PRECISION KEYLESS DRILL CHUCK (3700-0250)

  • Chino, California, United States
  • Jan 30th
SANDVIK INSERTS SNMG 09 03 12-QM 235 PACK OF 10 TURNING CUTTING MACHINIST CNC

SANDVIK INSERTS SNMG 09 03 12-QM 235 PACK OF 10 TURNING CUTTING MACHINIST CNC

  • Plymouth, Michigan, United States
  • Jan 30th
Cutoff & Grooving Toolholder

Cutoff & Grooving Toolholder

  • Fort Worth, Texas, United States
  • Jan 30th
K4-140CS SUNNEN HONE MANDREL WITH ADAPTER .140" - .145" RANGE

K4-140CS SUNNEN HONE MANDREL WITH ADAPTER .140" - .145" RANGE

  • Cleveland, Ohio, United States
  • Jan 30th
K6-190CS SUNNEN HONE MANDREL WITH ADAPTER .190" - .195" RANGE

K6-190CS SUNNEN HONE MANDREL WITH ADAPTER .190" - .195" RANGE

  • Cleveland, Ohio, United States
  • Jan 30th
7/8 Landmatic Die Head

7/8 Landmatic Die Head

  • Augusta, Kansas, United States
  • Jan 30th
KENNAMETAL KV4540-ETAL16SF SQUARE SHANK OD TOOL HOLDER

KENNAMETAL KV4540-ETAL16SF SQUARE SHANK OD TOOL HOLDER

  • Westlake, Ohio, United States
  • Jan 30th
3/16" SPI End Mill Holder with Erickson Compatible NMTB 40 Quick Change Shank

3/16" SPI End Mill Holder with Erickson Compatible NMTB 40 Quick Change Shank

  • San Diego, California, United States
  • Jan 30th
NEW UNIVERSAL ENGINEERING KWIK SWITCH 400 SPINDLE NUT #809184

NEW UNIVERSAL ENGINEERING KWIK SWITCH 400 SPINDLE NUT #809184

  • Wadley, Alabama, United States
  • Jan 30th
CNC 400W Spindle Motor ER11 & Power Supply & Speed Controller & Mount bracket

CNC 400W Spindle Motor ER11 & Power Supply & Speed Controller & Mount bracket

  • Guangzhou , China
  • Jan 30th
Aluminum 52mm Diameter Mold ER11 Spindle Motor Mount Bracket Clam + 4pcs screw

Aluminum 52mm Diameter Mold ER11 Spindle Motor Mount Bracket Clam + 4pcs screw

  • Guangzhou , China
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies