+ Post new Ad
Machinist Vintage Pair Of Parallel Clamps Tool Maker Made, US $250 – Picture 0
Machinist Vintage Pair Of Parallel Clamps Tool Maker Made, US $250 – Picture 1
Machinist Vintage Pair Of Parallel Clamps Tool Maker Made, US $250 – Picture 2
Machinist Vintage Pair Of Parallel Clamps Tool Maker Made, US $250 – Picture 3
Machinist Vintage Pair Of Parallel Clamps Tool Maker Made, US $250 – Picture 4
Machinist Vintage Pair Of Parallel Clamps Tool Maker Made, US $250 – Picture 0
Machinist Vintage Pair Of Parallel Clamps Tool Maker Made, US $250 – Picture 1
Machinist Vintage Pair Of Parallel Clamps Tool Maker Made, US $250 – Picture 2
Machinist Vintage Pair Of Parallel Clamps Tool Maker Made, US $250 – Picture 3
Machinist Vintage Pair Of Parallel Clamps Tool Maker Made, US $250 – Picture 4

Machinist Vintage Pair Of Parallel Clamps Tool Maker Made

US $250

  • Yorktown, Indiana, United States
  • Jan 30th
Open on mobile:
QR code
Up for bid, pair of parallel clamps tool maker made, condition is good, screws turn by hand , works goods, has surface rust , been in storage for a few yrs. has name stamped on the side. Size 3/4" x 3/4" x 6" lg. Has a 4" opening Approx. Needs to be cleaned,they came from a tool makers estate. Check other tools listed, thanks.

Directions

Similar products from Clips & Jaws

De Sta Co Clamps 603, 607, 610 and 620

De Sta Co Clamps 603, 607, 610 and 620

  • Royal Oak, Michigan, United States
  • Jan 30th
Vintage Lot Of 5 Vintage Steel C clamps Williams 403,404 Usa Made

Vintage Lot Of 5 Vintage Steel C clamps Williams 403,404 Usa Made

  • Sinclairville, New York, United States
  • Jan 30th
De-sta-co DSC 207-U Vertical Hold-Down Action Clamps 30+ avail - FREE Shipping!!

De-sta-co DSC 207-U Vertical Hold-Down Action Clamps 30+ avail - FREE Shipping!!

  • Batavia, Illinois, United States
  • Jan 30th
10" C Clamp Armstrong No. 410 Drop Forged USA 10" Max 1-7/8" Min 5-1/2" Throat

10" C Clamp Armstrong No. 410 Drop Forged USA 10" Max 1-7/8" Min 5-1/2" Throat

  • East Stroudsburg, Pennsylvania, United States
  • Jan 30th
58 Pc 5/8" Slot 1/2" - 13 Studs Hold Down Clamping Kit ( NOS)

58 Pc 5/8" Slot 1/2" - 13 Studs Hold Down Clamping Kit ( NOS)

  • Springfield, Ohio, United States
  • Jan 30th
New Pair (2) Irwin Quick-grip 2" 58200 of clamps

New Pair (2) Irwin Quick-grip 2" 58200 of clamps

  • San Jose, California, United States
  • Jan 30th
DESTACO Model # 604 Direct/Flush-Mount Reverse Action-Handle 1pc. De Sta Co

DESTACO Model # 604 Direct/Flush-Mount Reverse Action-Handle 1pc. De Sta Co

  • Seattle, Washington, United States
  • Jan 30th
DE-STA-CO 227-USS Stainless Steel Toggle Clamp Lot of 2

DE-STA-CO 227-USS Stainless Steel Toggle Clamp Lot of 2

  • Menomonie, Wisconsin, United States
  • Jan 30th
Proto, 406, 0" - 6" Deep Throat C-Clamp

Proto, 406, 0" - 6" Deep Throat C-Clamp

  • Chillicothe, Missouri, United States
  • Jan 30th
Brand New Rite Height James Morton 500L Table Clamps

Brand New Rite Height James Morton 500L Table Clamps

  • Vineland, New Jersey, United States
  • Jan 30th
Armstrong 78-106 Drop Forged Steel C-Clamp 6" Opening 2-3/4" Throat Depth USA

Armstrong 78-106 Drop Forged Steel C-Clamp 6" Opening 2-3/4" Throat Depth USA

  • San Diego, California, United States
  • Jan 30th
MACHINIST LATHE MILL 2 Micro Starrett Parallel Machinist Clamp s

MACHINIST LATHE MILL 2 Micro Starrett Parallel Machinist Clamp s

  • Morris Plains, New Jersey, United States
  • Jan 30th
Vintage Drop Forged Heavy Duty 6 Inch Number 44 Hargrave Cincinnati Tool C Clamp

Vintage Drop Forged Heavy Duty 6 Inch Number 44 Hargrave Cincinnati Tool C Clamp

  • Campton, Kentucky, United States
  • Jan 30th
COLUMBIA DEEP C CLAMP NO 546 2 1/2" x 6 1/4" AIRCRAFT WELDING TOOL

COLUMBIA DEEP C CLAMP NO 546 2 1/2" x 6 1/4" AIRCRAFT WELDING TOOL

  • Citrus Heights, California, United States
  • Jan 30th
Mitee-Bite OK Vise Clamp DK2-WTI NIB

Mitee-Bite OK Vise Clamp DK2-WTI NIB

  • Unionville, Pennsylvania, United States
  • Jan 30th
lot of (2) CINCINNATI TOOL No 540-12 540-6 Standard C-Clamp 12" & 6"

lot of (2) CINCINNATI TOOL No 540-12 540-6 Standard C-Clamp 12" & 6"

  • Lakewood, Washington, United States
  • Jan 30th
DE-STA-CO 605 Toggle Clamp, Straight Line, 300 Lbs, 3.29

DE-STA-CO 605 Toggle Clamp, Straight Line, 300 Lbs, 3.29

  • Greenville, Ohio, United States
  • Jan 30th
C-Clamp, 8", Cast, Steel, Iron vintage rusted

C-Clamp, 8", Cast, Steel, Iron vintage rusted

  • Bernardsville, New Jersey, United States
  • Jan 30th
(2)HARGRAVE 3" C-CLAMPS COPPER PLATED #400 400 (NICE)

(2)HARGRAVE 3" C-CLAMPS COPPER PLATED #400 400 (NICE)

  • Kalamazoo, Michigan, United States
  • Jan 30th
WILTON C CLAMP SCHILLER PARK, ILL. MADE IN THE U.S.A. #506C

WILTON C CLAMP SCHILLER PARK, ILL. MADE IN THE U.S.A. #506C

  • Hardinsburg, Indiana, United States
  • Jan 30th

People who viewed this item also vieved

205" x 47"x 8" Steel Acorn Welding T-Slot Table Cast Iron Layout Plate Fixture

205" x 47"x 8" Steel Acorn Welding T-Slot Table Cast Iron Layout Plate Fixture

  • Grand Rapids, Michigan, United States
  • May 29th
SPI GROUND PRECISSION ANGLE PLATE 8" X 8"

SPI GROUND PRECISSION ANGLE PLATE 8" X 8"

  • Glassboro, New Jersey, United States
  • May 29th
Phase ll Collet Spin Fixture Stock # 225-204 Serial # S-0333

Phase ll Collet Spin Fixture Stock # 225-204 Serial # S-0333

  • Coventry, Rhode Island, United States
  • May 29th
48 piece COLLET SET Size .265-.500"

48 piece COLLET SET Size .265-.500"

  • Mickleton, New Jersey, United States
  • May 31st
Schaublin ESX-32-20 Collet

Schaublin ESX-32-20 Collet

  • Peoria, Illinois, United States
  • May 31st
Hardinge Collet 2" EDC 5C

Hardinge Collet 2" EDC 5C

  • Halls, Tennessee, United States
  • May 31st
Rohm lathe Cylindrical grinder center set, internal external cones dead centers

Rohm lathe Cylindrical grinder center set, internal external cones dead centers

  • Brick, New Jersey, United States
  • Jun 1st
Very Large Lathe Center Morse Taper 6?

Very Large Lathe Center Morse Taper 6?

  • Morgantown, Pennsylvania, United States
  • Jun 1st
live center

live center

  • Anaheim, California, United States
  • Jun 1st
MT4 BUSHING HOLDER S FOR SERIES B 40-POSITION TOOL POST (3900-5339)

MT4 BUSHING HOLDER S FOR SERIES B 40-POSITION TOOL POST (3900-5339)

  • Chino, California, United States
  • Jun 2nd
MT3 BUSHING FOR HOLDER S FOR B SERIES 40-POSITION TOOL POST (3900-5338)

MT3 BUSHING FOR HOLDER S FOR B SERIES 40-POSITION TOOL POST (3900-5338)

  • Chino, California, United States
  • Jun 2nd
MT2 BUSHING FOR HOLDER S FOR E SERIES 40-POSITION TOOL POST (3900-5326)

MT2 BUSHING FOR HOLDER S FOR E SERIES 40-POSITION TOOL POST (3900-5326)

  • Chino, California, United States
  • Jun 2nd
KURT SWIVEL BENCH VISE

KURT SWIVEL BENCH VISE

  • Rush, New York, United States
  • Jun 2nd
Irwin 3" Clamp On Vise with Magnetic Jaw bumpers

Irwin 3" Clamp On Vise with Magnetic Jaw bumpers

  • Arlington, Virginia, United States
  • Jun 2nd
KURT 3600V CNC MACHINE VISE

KURT 3600V CNC MACHINE VISE

  • Boynton Beach, Florida, United States
  • Jun 2nd
Northwestern Machinist Step Blocks 1-S (3 pairs

Northwestern Machinist Step Blocks 1-S (3 pairs

  • Cherry Hill, New Jersey, United States
  • Jun 9th
Northwestern Machinist Step Blocks 2-S & 1-S

Northwestern Machinist Step Blocks 2-S & 1-S

  • Cherry Hill, New Jersey, United States
  • Jun 9th
Northwestern Machinist Step Blocks 2-S / 2 Pairs

Northwestern Machinist Step Blocks 2-S / 2 Pairs

  • Cherry Hill, New Jersey, United States
  • Jun 9th
NEW! INDEX DESIGNS CNC VH15 FADAL 15" Diameter 4th-Axis Rotary Table MADE in USA

NEW! INDEX DESIGNS CNC VH15 FADAL 15" Diameter 4th-Axis Rotary Table MADE in USA

  • Chatsworth, California, United States
  • Jun 12th
Yuasa SUDX 220 4th Axis Rotary Table Bras Worm Wheel Gear

Yuasa SUDX 220 4th Axis Rotary Table Bras Worm Wheel Gear

  • Keller, Texas, United States
  • Jun 13th
Machinist Tools: 6 South Bend Lathe Dogs & Drive NOS, Faceplate 1-1/2"-8 TPI

Machinist Tools: 6 South Bend Lathe Dogs & Drive NOS, Faceplate 1-1/2"-8 TPI

  • Tewksbury, Massachusetts, United States
  • Jun 13th
Machinist Screw Jack Set (MT-02)

Machinist Screw Jack Set (MT-02)

  • Waterbury, Connecticut, United States
  • Jun 13th
CARROLL & SON 11” Dividing Head Model D-140SK w/ 6” Chuck & 5” Dividing Plate

CARROLL & SON 11” Dividing Head Model D-140SK w/ 6” Chuck & 5” Dividing Plate

  • Euclid, Ohio, United States
  • Jun 14th
4 Sets of 6 Pair of NEW Enco Parallels 1/8 x 6 inches long 1/2 to 1-5/8 tall!

4 Sets of 6 Pair of NEW Enco Parallels 1/8 x 6 inches long 1/2 to 1-5/8 tall!

  • Troy, Missouri, United States
  • Jun 14th
"Crossbody 11.5""X3""X12""-Whiskered Cats - Fuchsia"

"Crossbody 11.5""X3""X12""-Whiskered Cats - Fuchsia"

  • Hickory Hills, Illinois, United States
  • Jun 19th
eCraft Replacement Blades 10/Pkg-

eCraft Replacement Blades 10/Pkg-

  • Hickory Hills, Illinois, United States
  • Jun 19th
"Skinneeez Extreme 3 Squeaker Stuffing Free Dog Toy 25""-Crocodile"

"Skinneeez Extreme 3 Squeaker Stuffing Free Dog Toy 25""-Crocodile"

  • Hickory Hills, Illinois, United States
  • Jun 19th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies