Manual Benchtop Injection Molding Machine Mim-100

US $17000

Brossard, Quebec, Canada
May 27th

Open on mobile:
QR code

General Introduction The MIM-200 is a small and hand-operated bench-top plastic injection molding machine. It is an ideal tool for plastic prototyping, small to medium volume production, and for scientific research and materials testing. The material heating system is equipped with Omron heater controller and copper heating coil. For more details of the product, please contact John at info@micronanotools.com or 1-514-600-5659. Features Small and robust design; Suitable for prototyping, small to medium volume production, and material research; Reliable and affordable Specifications Operation Suggestions When the setting temperate is reached, pull down the handle, and inject a few times without installing the mold; check the material politicization status. The ideal melt appears smooth surface, homogeneous melt, no burrs formation, no melt drops. A proper temperature setting is one of key factor in obtaining high molding quality. When plasticisation become normal, install the mold in right position and clamp it with the screw wheel. Pull down the manual handle until a solid resistance is felt. Hold the handle for a few seconds. The holding time may depend on part geometry, size, plastic material, and mold temperature. The idea is to pack more material into the mold during the material solidification stage before the gate completely solidifies. For continuous production, the plastic material pellets should be filled into the injection tube when the piston reaches half of its whole stroke. The injection force required may depends on part geometry, size, plastic material, melt and mold temperature. Higher mold temperature may decrease the injection force, but may extend the material cooling time in the mold. Warranty One year standard warranty with life-time support; contact for details. Damage due to improper storage condition or maintenance is not covered by warranty Longer time warranty available upon request Client reference available upon request Additional Notes The delivery time for both 110V and 220V system will be ready on June 15, 2016; Seller from Canada, close services, local services available upon request Free shipping for US and Canada, duty, and custom clearance included in the price when applicable Accept custom OEM if there are any special requirements for your application