Maxx Digital Bnc Ground Loop Isolator Cctv Balun Video Coaxial Coax Cable Fault

GBP 6.49

  • SK6 2BP, United Kingdom
  • Jan 30th
Maxx Digital CCTV BNC Ground Loop Isolator The BNC cure for ground loops and electromagnetic interference! Maxx Digital Ground Loop Isolators reduce "ground loop interference" with CCTV video signals. They have BNC male to BNC female connectors and mini 18cm cables on both sides. They're passive so require no power. They cure video-signal distortion caused by video ground loops and electromagnetic interference. The simple and cheap solution to eliminate picture tearing, cross-talk and rolling. Maxx Digital Ground Loop Isolators reduce ground loop interference with CCTV video signals. They're used where a CCTV video signal is transmitted between two points with a difference in ground potential. Differences in ground potentials are typically caused by unbalanced power line loads. Ground loop interference is caused by electromagnetic interference (EMI). When there's a large difference in ground potentials between two points, EMI may occur and the peak-to-peak magnitude may vary from zero volts to more than ten volts. Ground Loop Isolators help prevent EMI. They reduce the interference between the camera and the DVR by producing equal and opposite magnetic fields that cancel one another. Maxx Digital Ground Loop Isolators have built-in wave rejection, TVS (transient voltage suppressors) for surge protection, interference rejection and noise filters. These devices will prevent ‘ghosting’ in the video feed by absorbing and eliminating the reflected video ghost signal. They also restore the characteristic impedance of the downstream video signal to prevent secondary ghosting in the image. We’d suggest installing these devices on every installation and on every camera, even where no ground loops exist, and you’ll be surprised how much it improves the picture quality. It will also future proof the instillation against unpredicted distortion problems and interference issues, saving you the hassle of having to return to the camera to fit one. Features BNC male to BNC female connectors Mini 18cm cables on both sides Passive - No power required Cures video-signal distortion caused by video ground loops Eliminates picture tearing, cross-talk and rolling Prevents interference from other 3rd party power cables Built in video filter for use with DVR's for added interference rejection Built in TVS (Transient Voltage Suppressors) for surge protection Model No. - GB100 Insertion Loss - 0.5dB Frequency Response - 0-3dB at 10Mhz Input Resistance - 75 Ohm Output Resistance - 75 Ohm Isolation Voltage - 600VDC (Min) Insulation Resistance - 100m Ohm Transient Voltage Suppressor - 12 Vrms Dimensions - 72 x 28 x 21mm Material - ABS Plastic Colour - Black 1 x BNC Ground Loop Isolator This product is subject to the manufacturer's warranty or our own FREE 30 day warranty, whichever is longer! Enjoy 100% peace of mind with TeckStar! © 2014 Teckstar - All Rights Reserved Business seller information Teckstar Contact details Teckstar_SK6 eBay Unit A10, Pear Mill Industrial Estate Stockport Road West, Lower Bredbury Stockport Cheshire SK6 2BP United Kingdom Phone:0161|4303849 Email:sales@teckstar.co.uk I provide invoices with VAT separately displayed. Print version Terms and conditions of the sale Please contact us for full T&C's, thank-you. Return policy To qualify for a hassle-free return, you must pay with PayPal and have the item shipped to a US address. The item must be returned in the same condition it was received. See terms and conditions - opens in a new window or tab. After receiving the item, open a return within Return shipping 30 days You pay return shipping
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Brand Maxx Digital
Features Wired
MPN MD-BNC-GB100
Connector A BNC Male
Model GB100
Connector B BNC Female
Colour Black
Connector A (To Camera) BNC Male
Type CCTV Accessories
Connector B (To Cable) BNC Female
EAN 5055757209379

Directions

Similar products from Other Guard & Supervision Equipment

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies