Megger 230425 Hipot Tester, Great Working Condition, Calibrated

US $520

  • Grants Pass, Oregon, United States
  • Jun 10th
Almost new condition Megger Hipot tester with leads, certificate from Megger, user manual tested and calibrated. Comes with NIST calibration certificate for ISO-9001 compliance!This sells new for $2352.35! 230425: 0-4 kV AC and 0-5 kV DC Zero start/reset in event of failure Ground continuity check of three-wire devices with high-voltage interlock (AC models only) Front-Panel adjustable leakage current trip 0.3 to 12 mA One second or continuous testing Recessed high-voltage connections AC and AC/DC High-Pot Testers available from Megger are designed for safety and ease of operation, and readily adapt to development, maintenance or production testing. Three models are available: two ac and one ac/dc. The AC High-Pot Testers feature a front-panel, NEMA 5-15R three-prong output receptacle. Booted, alligator-clip output and return probes are also supplied with all models. Test voltage is continuously adjustable from zero to full output, with a zero-start interlock. Leakage current trip level may be adjusted from 0.3 to 12 mA by a front-panel knob. Pushbuttons are provided to select one-second or continuous testing, to turn off the high voltage and to reset the instrument. All high-voltage connections are recessed to prevent accidental contact with high voltage. During testing, high voltage will automatically shut down within 50 ms of arcing or exceeding the preset trip level. Visual and audible alarms alert the operator upon failure. The instruments also feature an interlock that prevents the high voltage from being applied if the supply ground wire is open or if the hot and neutral wires are interchanged. A Tester Grounded lamp lights to confirm the instrument is connected to a properly grounded power source. The AC High-Pot Testers will automatically shut down if ground circuit resistance of the test object exceeds 15ohms at any time during testing. This feature may be by passed when testing double-insulated devices or when using test probes. The AC/DC High-Pot Tester provides a slide switch to select either ac or dc test voltage. The slide switch safely covers the output jacks not in use.

Directions

Similar products from Multimeters & Insulation Testers

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies