Mep003a 10kw Military Generator Non-working For Parts Or Fix.

US $300.00

Scottsboro, Alabama, United States
Aug 30th

Open on mobile:
QR code

MEP003A 10kW Military Generator. Came in a trailer I purchased. I am a trailer guy and have no interest in learning about this thing. Every hour I spend learning about it and general contracting its restoration is a hour I could be doing something I'm good at. Non-working; fix it or part it. Local pick-up or can supervise freight transfer. I have no other information other than on line specs for a working unit from Green Mountain Generators:Continuous Power Rating: 10 Kilowatt (kW), 60hz at 80% power factor below 5,000 feet above sea level. (The US Military underrates their units by at least 25%.) Current Type: Alternating Current (AC) Line to Line Voltage (Volts): 120 and 240 volts Amp Output: 83.2 amps (assumes 120 volt output and 10,000 watt rating. The US Military underrates their units by at least 25%. If you assume 12,500 watts and 120 volt output, you arrive at 104 amps. Voltage: 120V (single phase, 2 wire), 120/240V (single phase, 3 wire), 120/208V (3-phase, 4 wire) Phases: Single AND Three on-the-fly Fuel Type: Diesel (Bio-diesel retrofits are possible assuming 1) the bio-diesel is preheated properly and 2) the bio-diesel is of high quality and purity) # of Cylinders: 4 RPM: 1,800 (Note that most consumer units run hot and fast at 3,600 RPMs are not capable of continuous use.) Engine Manufacturer: Onan (now Cummins Onan – a world leader in diesel engine technology) Engine Type: Four Cycle Displacement: 140 cubic inches (2294 cc.) Compression Ratio: 19:1 Horsepower: 17.8 @ 1800 RPM (0-5000 ft above sea level) Governor: Internal flyball; external adjustment Cooling Method: Air-Cooled (i.e. not liquid-cooled; no water pump, radiator or coolant needed which radically reduces maintenance costs) Excitor Type: Self-Excited Body Material: Steel Radio Interference Suppression: Included/Yes (just in case!) Fuel Filters: Tank fuel strainer for large particulates; followed by in-line strainer; followed by dual in-line redundant fuel filters (easily replaced with Napa parts) Fuel Pumps: Three redundant electric fuel pumps (one is for auxiliary fuel source such as a 55 gallon drum); one master mechanical injector pump. Air Filter: Large and easily replaceable air filter with cold-weather intake diverter. You can switch from normal air filtration to the cold-weather setting that will suck air in over the exhaust manifold to pre-heat the air. This is an excellent cold weather feature. Cold Weather Kit: Includes: air intake pre-heat, glow plugs, 24 volt cold weather starting system. You will not find more durable cold-weather features in any unit on the market. Fuel Tank Capacity: 12.5 gallons Lubricating Oil Capacity (Less Filter): 3 quarts, 4 quarts if filter is changed (2.8 liters, 3.7 liters if filter is changed) Ventilation requirements (Total): 1350 CFM at 1800 RPM MEP003A Dimensions (Without ASK): overall length 62 in. (157.5 cm.) overall width 32in. (81.3 cm) overall height 37in. (94 cm.) net weight empty 1220 lbs. (553.4 kg.) net weight filled 1360 lbs. (616.9 kg.) MEP003A Dimensions (With ASK Installed):overall length 69 in. (175.5 cm.) overall width 36 in. (91.3 cm) overall height 39 in. (99 cm.) net weight empty 1365 lbs. (619.4 kg.) net weight filled 1505 lbs. (683.9 kg.) ADDITIONAL INFORMATION WEIGHT 1340 lbs DIMENSIONS 62 40 37 in MPN MEP003A BRAND Onan, Milspec

Condition:	For parts or not working: An item that does not function as intended and is not fully operational. This includes items that are defective in ways that render them difficult to use, items that require service or repair, or items missing essential components. See the seller's listing for full details. ...	Brand	Onan
Power Source	Diesel
Type	Military Surplus
Model	MEP003A
Rated Output (Watts)	10 KW