Microduino Diy Li-ion Battery Management Module

US $8.80

  • Swanton, Vermont, United States
  • Aug 22nd
Description Discharging management module for a single 3.7V lithium boosting 5V output and LDO boosting to 3.3V output 2.54mm(0.1 inch) pin pitch, compatible with breadboards and pegboards 1.27mm-spacing, 4-pin interface Works with the Microduino DIY Battery Management BM Shield The Microduino DIY Li-Ion Battery Management Module is a discharging management module for a single lithium boosting to 5V output and LDO boosting to 3.3V output. It should be used with the Microduino DIY Battery Management BM Shield. The Li-Ion battery is not included. The analog voltage detection on the BM can be chosen between A6 and A7. It can judge the quantity of the electricity of the battery using MCU to detect the voltage. Specifications Supports UPS Needs to be plugged with the Microduino Module BM Shield With high integration of electricity indicator 5v boost voltage and 3.3v LDO A 1.27-spacing, 4-pin interface ("VUSB","SWI","BAT" and "GND") The active interfaces in UPIN27 are 5V, 3V3 and GND The analog voltage detection can be chosen between A6 and A7 Can judge the quantity of the electricity of the battery using MCU to detect the voltage
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Brand Microduino
Type Microduino
MPN MDBB11
UPC Does not apply

Directions

Similar products from Voltage Converters & Meters

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies