+ Post new Ad
MILLER SPECTRUM 125C PLASMA CUTTER excellent condition, US $550.00 – Picture 0
MILLER SPECTRUM 125C PLASMA CUTTER excellent condition, US $550.00 – Picture 0

Miller Spectrum 125c Plasma Cutter Excellent Condition

US $550.00

  • Emeryville, California, United States
  • Jan 30th
Open on mobile:
QR code
purchased for race car project now completed bought from Sunbelts Rentals buyer pays for shipping The Miller Spectrum 125C custs 1/8" mild steel and has a built in heavy-duty compressor; making this an out-of-the-box ready plasma cutting system. Rated Cutting Capacity The rated cutting capacity is based on traveling approximately 10 inches per minute to achieve a steady, precise cut. This is the key rating that should meet or exceed your typical cutting thickness requirements. Constant Output Cutting Power The constant current design offers a consistent 12 amp cutting arc for continuous quality cutting up to 1/8 in. steel. Portable for Your Applications Spectrum 125C comes complete with built-in heavy-duty compressor and weighs only 31 lb, offering the operator a high level of portability and convenience. Built-In, Heavy-Duty Industrial Piston-Driven Compressor Built-in, heavy-duty industrial piston-driven compressor provides long life and superior airflow. LVC Line Voltage Compensation LVC provides peak performance power under variable conditions (98 to 132 volts) for steady cuts and cleaner ending cuts. Auto-Refire Technology Provides ultimate customer convenience by automatically controlling the pilot arc when cutting expanded metal or multiple pieces of metal. The pilot arc will switch in and out as fast as needed when cutting expanded metal and provides maximum power for cutting thicker metalaЂ”all automatically! No need for manual re-triggering which reduces user hand fatigue. Can Be Powered by Miller Engine Driven Generators Can be powered by any Miller engine drive with generator power output of 2 kW or more, such as the Bobcat, Trailblazer or equivalent competitive equipment.
Condition Used :
An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes “normal scratches and marks”

Directions

Similar products from Plasma Cutting Equipment

5pcs 9-8215 Thermal Dynamics SL60/SL100 Electrodes ***** From USA ******

5pcs 9-8215 Thermal Dynamics SL60/SL100 Electrodes ***** From USA ******

  • Brownsville, Texas, United States
  • Jan 30th
5pcs 9-8212 Thermal Dynamics SL60/SL100 Tip 100A ****** From USA *******

5pcs 9-8212 Thermal Dynamics SL60/SL100 Tip 100A ****** From USA *******

  • Brownsville, Texas, United States
  • Jan 30th
Broco PCRP-305A Collet Kit For Broco Torch And 3/8" Exothermic Cutting Rods NEW

Broco PCRP-305A Collet Kit For Broco Torch And 3/8" Exothermic Cutting Rods NEW

  • McDonough, Georgia, United States
  • Jan 30th
Hypertherm Plasma Cutter part #220313 Nozzle Ret. Cap 30 Amp. New

Hypertherm Plasma Cutter part #220313 Nozzle Ret. Cap 30 Amp. New

  • Duluth, Minnesota, United States
  • Jan 30th
Hypertherm Plasma Cutter part # 220407 Shield 260 amp. New

Hypertherm Plasma Cutter part # 220407 Shield 260 amp. New

  • Duluth, Minnesota, United States
  • Jan 30th
Hypertherm Plasma Cutter part # 220187 MS Electrode 80 Amp. (2) New

Hypertherm Plasma Cutter part # 220187 MS Electrode 80 Amp. (2) New

  • Duluth, Minnesota, United States
  • Jan 30th
Hypertherm 190C plasma cutter

Hypertherm 190C plasma cutter

  • Portland, Oregon, United States
  • Jan 30th
WS plasma torch Shield Ref: 220818 PKG/5

WS plasma torch Shield Ref: 220818 PKG/5

  • LN, China
  • Jan 30th
NEW MOTOR GUARD CORPORATION COMPRESSED AIR FILTER M-26

NEW MOTOR GUARD CORPORATION COMPRESSED AIR FILTER M-26

  • Milton Freewater, Oregon, United States
  • Jan 30th
PLAZCRAFT 1640002 / MILLER 171874 Gas Cups (2pcs)

PLAZCRAFT 1640002 / MILLER 171874 Gas Cups (2pcs)

  • San Diego, California, United States
  • Jan 30th
Thermal Arc Pak 10xr plasma cutter

Thermal Arc Pak 10xr plasma cutter

  • Bradford, Pennsylvania, United States
  • Jan 30th
Hypertherm torch main body 60974-7

Hypertherm torch main body 60974-7

  • Quimby, Iowa, United States
  • Jan 30th
Hypertherm 220163 HPR torch receptacle

Hypertherm 220163 HPR torch receptacle

  • Cleburne, Texas, United States
  • Jan 30th
Snap-on plasma 50

Snap-on plasma 50

  • West Newbury, Vermont, United States
  • Jan 30th
Burny ServoPak 250

Burny ServoPak 250

  • Hicksville, Ohio, United States
  • Jan 30th
Thermal Dynamics 9-8226 GOUGING TIP B Pk = 5

Thermal Dynamics 9-8226 GOUGING TIP B Pk = 5

  • Winona, Minnesota, United States
  • Jan 30th
Thermal dynamics Pak Master 100 plasma cutter

Thermal dynamics Pak Master 100 plasma cutter

  • Whiteland, Indiana, United States
  • Jan 30th
ESAB PLASMARC TORCH TIP WRENCH 19129

ESAB PLASMARC TORCH TIP WRENCH 19129

  • Kansas City, Kansas, United States
  • Jan 30th
Profax PX5524 air regulator for small plasma cutters

Profax PX5524 air regulator for small plasma cutters

  • Stow, Ohio, United States
  • Jan 30th
Ice55c. 25ft. Plasma torch for Miller 2050 plasma cutter

Ice55c. 25ft. Plasma torch for Miller 2050 plasma cutter

  • Bonifay, Florida, United States
  • Jan 30th

People who viewed this item also vieved

L-Tec 225 welder

L-Tec 225 welder

  • Goffstown, New Hampshire, United States
  • Mar 10th
Miller Maxstar 200 907099 TIG Welder

Miller Maxstar 200 907099 TIG Welder

  • Reno, Nevada, United States
  • Mar 10th
Lincoln Welder SA200 Fairbanks Morse Q2563C 20 Degree Impulse Coupler

Lincoln Welder SA200 Fairbanks Morse Q2563C 20 Degree Impulse Coupler

  • Spotsylvania, Virginia, United States
  • Mar 10th
Vintage Portable Blade Welder (25-lbs.) 7" x 9" Benchtop Unit, WORKING!

Vintage Portable Blade Welder (25-lbs.) 7" x 9" Benchtop Unit, WORKING!

  • East Amherst, New York, United States
  • Mar 10th
HARRIS MODEL 980 CUTTING TORCH

HARRIS MODEL 980 CUTTING TORCH

  • Saint Louis, Missouri, United States
  • Mar 11th
Three Acetylene Cutting Torch Tips, Oxyweld. Victor or Harris type.

Three Acetylene Cutting Torch Tips, Oxyweld. Victor or Harris type.

  • Laurie, Missouri, United States
  • Mar 11th
(4)Acetylene Cutting Torch Tips 2-1-118 /1-1-101/2-1-101/3-1-101FITS VICTOR New!

(4)Acetylene Cutting Torch Tips 2-1-118 /1-1-101/2-1-101/3-1-101FITS VICTOR New!

  • Lambertville, Michigan, United States
  • Mar 11th
Uniweld Wurks-A 12 Piece Welding Kit.

Uniweld Wurks-A 12 Piece Welding Kit.

  • Marysville, Washington, United States
  • Mar 11th
ESAB HC-5 Remote Hand Control 34838 Mig Tig Stick Welding 14 Pin Svi 300i Mts

ESAB HC-5 Remote Hand Control 34838 Mig Tig Stick Welding 14 Pin Svi 300i Mts

  • Millstadt, Illinois, United States
  • May 28th
7mb-315 single clamp 9m style for metco style plasma gun

7mb-315 single clamp 9m style for metco style plasma gun

  • Brevard, North Carolina, United States
  • May 28th
Miller Trailblazer 302 AIRPAK Welder with GFCI & Electric Fuel Pump

Miller Trailblazer 302 AIRPAK Welder with GFCI & Electric Fuel Pump

  • Durham, Pennsylvania, United States
  • May 28th
Strong Hand Adjust-O Magnet Square #MSA47 Pull Force:75lbs

Strong Hand Adjust-O Magnet Square #MSA47 Pull Force:75lbs

  • Independence, Missouri, United States
  • May 28th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies