Millermatic 212 Auto-set Mig Welder - 907405

US $2,075.00

United States
Jan 30th

Open on mobile:
QR code

Millermatic 212 Auto-Set MIG Welder - 907405 The Millermatic® 212 Auto-Set™ eliminates the guess work when setting weld parameters. Use Auto-Set when you want the speed, convenience and confidence of pre-set controls. Simply set the wire diameter, set the material thickness, and go! The Auto-Set control automatically sets your welder to the proper parameters. It is available when welding mild steel with solid wire and only works with .030 and .035 solid wires and C25 shielding gas (75% Argon, 25% CO2). You can also set the weld parameters manually. Simply refer to the flip-down parameter chart, and set the voltage and wire feed speed to the recommended settings for your application. All-in-one wire welder that welds material from 22 gauge to 3/8 in. thick in a single pass. Auto-Set™ A breakthrough control that automatically sets your welder to the proper parameters. Auto-Set makes set up very simple and gives you precise settings instantly. Manual Mode Gives you the flexibility to manually set the machine when welding aluminum, stainless steel or anytime you want to set your own parameters on mild steel. Standard Built-In Solid-State Contactor Circuit Makes wire electrically "cold" until trigger is pulled. This makes unit safer and torch easier to position before starting to weld. EZ-Change™ Low Cylinder Rack Allows users to easily roll cylinders on and off of rack - no need to lift cylinders. Compatible with Spoolmate 200 Series Spool Gun! The Spoolmate 200 saves time for the operator by eliminating the need to go back to the machine to change wirefeed speed. Line Voltage Compensation Keeps welding output constant even if power input varies by +/- 10%. Reduce Maintenance and Operating Costs Our Fan-On-Demand™ cooling system only operates when needed, reducing power consumption and contaminants drawn into the machine. Larger Work Area Now with longer 15-ft M-25 MIG gun! Comes Complete With: 7 ft (2.1 m) power cord and plug (208/230 V model only) 15 ft (4.6 m), 250 amp M-25 MIG gun for .030/.035 in wire 10 ft (3 m) work cable and clamp Argon mix regulator/flow gauge and hose Extra contact tips Factory-installed running gear with EZ-Change™ Low Cylinder Rack .030/.035 in reversible drive rolls Set-up and operation interactive CD Material thickness gauge(#229 895) Rated Output: 160 A, 24.5 VDC at 60% Duty Cycle, 210 A, 22 VDC at 30% Duty Cycle Amperage Range: 30 –210 A Max. Open-Circuit Voltage: 34.5 Amps Input at Rated Output, 60 Hz 200 (208) V 230 V KVA KW 31.2, 27.1. 6.36. 5.45 2.1*, 1.8*, 0.51*, 0.26* Wire Type and Diameter Solid/Stainless Steel: .023–.035 in (0.6 – 0.9 mm) Flux Cored: .030 – .045 in (0.8 – 1.2 mm) Wire Feed Speed: 50–700 IPM (1.3–17.8 m/min) Max. Spool Size: 12 in (305 mm) Dimensions: H: 30 in (762 mm), W: 19 in (483 mm). D: 40 in (1016 mm) Net Weight: 178 lb (81 kg) We expect payment within 3 days. We suggest Priority Mail for lighter weight items under 4lbs and UPS for heavier items when shipping in the Unites States. WE USUALLY SHIP THE NEXT BUSINESS DAY AFTER PAYMENT RECEIVED, SAME DAY IN SOME CASES. UPS SENDS TRACKING INFORMATION TO YOUR E-MAIL ADDRESS USED FOR SALE. TRUCK TRACKING INFO SENT IN SEPARATE E-MAIL. All items are covered by Manufacturer warranties. We will help you with any warranty issues. Small items shipped by UPS ground or USPS Priority Mail, unless you choose 1st or 2nd day air at additional charge. Larger welders are shipped via common carrier of our choice. We get it to your door. Additional charges for lift gates or special delivery are at your cost. We strive to always have stock available for shipping, but from time to time stock-outs may occur. Some welders are not stock items and will be ordered from manufacturer when paid for. It usually takes only a few days to ship to you. Some are shipped direct from manufacturer. PLEASE CALL BEFORE RETURNING ANY ITEM. EXCHANGES AND RETURNS SUBJECT TO 20% RE-STOCK PLUS OUTBOUND SHIPPING CHARGES AND RETURN SHIPPING CHARGES. ALL PRODUCTS COVERED BY MFG. WARRANTIES. INTERNATIONAL BUYERS: ONLY ITEMS MARKED FOR SALE FOR INTERNATIONAL SALES WILL BE SOLD INTERNATIONALLY. WARRANTIES MAY NOT BE HONORED IN ALL COUNTRIES. BUYER SOLELY RESPONSIBLE FOR ALL IMPORT FEES AND DUTIES. ALL PAYMENTS IN US DOLLARS, ON CREDIT CARD OR INSTITUTION DOING BUSINESS IN USA. PAYPAL USERS SUBJECT TO EXCHANGE FEE. Paypal is preferred payment method. BUYER SOLELY RESPONSIBLE FOR ALL IMPORT FEES AND DUTIES. ALL PAYMENTS IN US DOLLARS, ON CREDIT CARD OR INSTITUTION DOING BUSINESS IN USA. PAYPAL USERS SUBJECT TO EXCHANGE FEE. Credit Card: Call 800-284-6992, 8:00AM-4:00PM EST M-F to use all major credit cards. ALL PAYMENTS IN US DOLLARS, ON CREDIT CARD OR INSTITUTION DOING BUSINESS IN USA. Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items.

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	Miller
Model	907405
Processes	MIG
MPN	907405
Power Source	208/240V Electric