Millermatic 350p Wire Feed Mig Flux Core Welder 3 phase ON CART! Well Maintained, US $1,500.00 – Picture 0

Millermatic 350p Wire Feed Mig Flux Core Welder 3 phase ON CART! Well Maintained, US $1,500.00 – Picture 1

Millermatic 350p Wire Feed Mig Flux Core Welder 3 phase ON CART! Well Maintained, US $1,500.00 – Picture 2

Millermatic 350p Wire Feed Mig Flux Core Welder 3 phase ON CART! Well Maintained, US $1,500.00 – Picture 3

Millermatic 350p Wire Feed Mig Flux Core Welder 3 phase ON CART! Well Maintained, US $1,500.00 – Picture 4

Millermatic 350p Wire Feed Mig Flux Core Welder 3 phase ON CART! Well Maintained, US $1,500.00 – Picture 5

Millermatic 350p Wire Feed Mig Flux Core Welder 3 phase ON CART! Well Maintained, US $1,500.00 – Picture 6

Millermatic 350p Wire Feed Mig Flux Core Welder 3 phase ON CART! Well Maintained, US $1,500.00 – Picture 7

Millermatic 350p Wire Feed Mig Flux Core Welder 3 phase ON CART! Well Maintained, US $1,500.00 – Picture 8

Millermatic 350p Wire Feed Mig Flux Core Welder 3 Phase On Cart! Well Maintained

US $1,500.00

Tallahassee, Florida, United States
Jan 30th

Open on mobile:

Freight Shipping Calculator Fill out the fields below and press the orange button to get instant rates. Enter Your U.S. Zip Select Location Type Business with Dock or Forklift Business without Dock or Forklift Construction Site Convention Center or Tradeshow Residence Terminal Rates are subject to change based on time of calculation and data entered. © 2011 FreightCenter Inc. - All Rights Reserved http://www.freightcenter.com Create a Shipping Calculator Pulsed-MIG Advantage Whether welding aluminum, steel or stainless steel, improving productivity by 30, 50 or 100% and saving tens of thousands of dollars are typical results when switching to Pulsed-MIG with the Millermatic 350P. Aluminum Pulse Hot Start Automatically provides more arc power to eliminate a "cold start" that is inherent with aluminum starts. SharpArc Optimizes the size and shape of the arc cone, bead width and appearance and puddle fluidity. Line Voltage Compensation (LVC) Line Voltage Compensation keeps output of the power source constant regardless of fluctuation in input power ± 10%. Aluminum Welding Package with Push-Pull Gun Aluminum Welding Package with Push-Pull Gun Superior Aluminum Performance on material as low as 19 gauge. With one stock number you get the best aluminum welding package available. For aluminum welding the optional XR-Aluma-Pro™ push-pull gun provides the ability to utilize 12 in. rolls of aluminum for extended welding time and reduced labor time from changing 1 lb rolls of aluminum wire. See how much you can save by using a push-pull gun! Gun-On-Demand Miller's Gun-On-Demand feature allows you to use either a standard MIG gun, a Spoolmatic 15/30A spool gun or any other Miller push-pull gun without flipping a switch. The machine senses which gun you are using when you pull the trigger. Fan-On-Demand The Fan-On-Demand Cooling system only operates when needed, reducing power consumption and keeping internal components cleaner. Processes MIG (GMAW) Pulsed MIG (GMAW-P) Flux-Cored (FCAW) Rated Output 300 A at 32 VDC, 60% Duty Cycle, 60 Hz, 1- or 3-Phase Input Power Amperage Range 25 – 400 A Wire Feed Speed 50–700 IPM (1.3–18 m/min.) MIG Gun 50–800 IPM (1.3–20 m/min.) Spool Gun/Push-Pull Gun Weight 181 lb. (82 kg) The Power of Blue® . Rated Output 300 A at 32 VDC, 60% Duty Cycle, 60 Hz, 1- or 3-Phase Input Power Amperage Range 25 – 400 A Wire Feed Speed 50–700 IPM (1.3–18 m/min.) MIG Gun 50–800 IPM (1.3–20 m/min.) Spool Gun/Push-Pull Gun Weight 181 lb. (82 kg) Power source is warranted for 3 years, parts and labor. Original main power rectified parts are warranted for 5 years. Gun warranted for 90 days, parts and labor. Fan-On-Demand™ cooling system only operates when needed, reducing power consumption and contaminants drawn into the machine. Comes complete with: 15-ft. (4.6 m) Bernard® Q300 MIG gun with extra Centerfire™ contact tips 10-ft. (3 m) work cable with clamp 10-ft. (3 m) industrial power cord (without plug) for single- or three-phase Factory-installed gas solenoid Argon mix regulator/flow gauge and hose Factory-installed, low-mounted running gear/ cylinder rack .035/.045-in. reversible V-groove drive rolls (order U-groove drive roll kits for aluminum welding) Set-up and operation CD Industrial, four-roll wire drive system features two easy-to-set, scaled, tension adjustments and quick-change reversible drive rolls for .035- and .045-inch (0.9 and 1.2 mm) wire. Special features l Run-in adjustment for MIG, push-pull and spool guns. l Built-in two-minute spot timer. l Pre-flow and post-flow adjustment. l View actual welding amperage/voltage during welding, and five seconds after arc has shutoff. l SharpArc™ controls welding arc cone width in Pulsed MIG welding mode. l Inductance control customizes weld out put characteristics in MIG welding mode Comes complete with: 15-ft. (4.6 m) Bernard® Q300 MIG gun with extra Centerfire™ contact tips 10-ft. (3 m) work cable with clamp 10-ft. (3 m) industrial power cord (without plug) for single- or three-phase F actory-installed gas solenoid Argon mix regulator/flow gauge and hose Factory-installed, low-mounted running gear/ cylinder rack .035/.045-in. reversible V-groove drive rolls (order U-groove drive roll kits for aluminum welding) Set-up and operation CD Internal timers l Adjustable crater feature optimizes crater size for steel, stainless, aluminum and metal-core applications. l Crater time delay allows deactivation of crater feature for tack or small welds. Rated Output Three-Phase 300 A at 32 VDC, 60% Duty Cycle Single-Phase 300 A at 32 VDC, 60% Duty Cycle Amperage Range 25–400 A Amps Input at Rated Output, 60 Hz 200 V 230 V 460 V KVA KW 34 30 15 11.6 11.5 69 61 30 13.1 11.2 Wire Type and Diameter Solid Steel .023–.045 in. (0.6–1.2 mm) Aluminum .035–.047 in. (0.9–1.2 mm) Flux-Cored .030–.045 in. (0.8–1.2 mm) Metal-Cored .035–.052 in. (0.9–1.3 mm) Wire Feed Speed MIG Gun 50–700 IPM (1.3–18 m/min.) Spool Gun and Push-Pull Gun 50–800 IPM (1.3–20 m/min.) Dimensions H: 34 in. (863 mm) W: 19 in. (483 mm) D: 41 in. (1041 mm) Net Weight 181 lb. (82 kg)

Condition	Used : An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes	“Used, usual wear and tear for a welder, but in overall good shape. In working order. Im no expert so sale is AS IS.”