+ Post new Ad
MILWAUKEE 2" THIN WALL PERCUSSION CORE BIT AND SDS SHANK CORE BIT ADAPTER, US $99.00 – Picture 0
MILWAUKEE 2" THIN WALL PERCUSSION CORE BIT AND SDS SHANK CORE BIT ADAPTER, US $99.00 – Picture 0

Milwaukee 2" Thin Wall Percussion Core Bit And Sds Shank Core Bit Adapter

US $99.00

  • Windsor, California, United States
  • Jan 30th
Open on mobile:
QR code
Milwaukee 48-20-5035 BIT CORE 2" Milwaukee's Core Bits are ideal for large hole drilling where depth is relatively shallow. The Core Bit cuts a kerf only. The usable depth of Thick Wall Core Bits is 4-3/8 inch. The inside core must be removed by the operator before deeper drilling can be accomplished. The Thin Wall construction is ideal for smaller hammers and newer concrete. A 7-1/2 inch extension is available to allow for the deeper holes to be drilled. The appropriate (dependant on the diameter) SDS Plus drive Shank must be used to drive the Core Bit. Use of Center Pin and Guide Plate is not recommended for positioning and starting a 1 inch hole. Thin Wall Core Bits are available from 1 inch to 6 inch diameters. See Thick Wall Core Bits for cured/seasoned concrete or use with larger hammers. Features 2 in. diameter Usable cutting depth 3 in. Thin wall Use with SDS core bit shank 48-03-3555 (8 in.) or 48-03-3561 (12 in.) Milwaukee 48-03-3555 ADAPTER 8 SDS THIN CORE BIT Due to prolonged, heavy use some components may need to be replaced. Use only Milwaukee specified replacement parts to achieve maximum life and performance from your Milwaukee tool. If unable to locate an accessory or repair part please contact Milwaukee at milwaukeetool.com. Features 8 in. length For 1-3/4 in. and larger Core Bits
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Brand MILWAUKEE

Directions

Similar products from Core Drills & Rigs

10" Z-1RB CORE DRILL 2 SPEED W/ STAND CONCRETE CORING by BLUEROCK ® Tools

10" Z-1RB CORE DRILL 2 SPEED W/ STAND CONCRETE CORING by BLUEROCK ® Tools

  • Seattle, Washington, United States
  • Jan 30th
Hilti DD-150-U Diamond Core Drill with Vacuum Vac Rig and Stand

Hilti DD-150-U Diamond Core Drill with Vacuum Vac Rig and Stand

  • United States
  • Jan 30th
Hilti DD200 Core Drill with Vacuum Base plate DDHD30VBP and Vacuum Pump DDVPU

Hilti DD200 Core Drill with Vacuum Base plate DDHD30VBP and Vacuum Pump DDVPU

  • Temecula, California, United States
  • Jan 30th
7" Diamond core bit Professional quality -fast Drilling

7" Diamond core bit Professional quality -fast Drilling

  • Potomac, Maryland, United States
  • Jan 30th
NEW 4" BLUEROCK ® Tools 4" Z-1WS CORE DRILL 2 SPEED W/ STAND CONCRETE CORING

NEW 4" BLUEROCK ® Tools 4" Z-1WS CORE DRILL 2 SPEED W/ STAND CONCRETE CORING

  • Seattle, Washington, United States
  • Jan 30th
3" Diteq C52 Diamond Core Drill Bit - Very High Quality for concrete w/ steel

3" Diteq C52 Diamond Core Drill Bit - Very High Quality for concrete w/ steel

  • Poplar Bluff, Missouri, United States
  • Jan 30th
NEW 10" (255mm) CORING BIT EXTENSION FOR CORE DRILL - USE FOR DEEPER HOLES

NEW 10" (255mm) CORING BIT EXTENSION FOR CORE DRILL - USE FOR DEEPER HOLES

  • Seattle, Washington, United States
  • Jan 30th
Pack of 100 Reinforced Cut Off Wheels for Dremel 1 1/4

Pack of 100 Reinforced Cut Off Wheels for Dremel 1 1/4

  • fuzhou, China
  • Jan 30th
ADAPTER FOR HILTI CORE DRILL 200 BS / BI

ADAPTER FOR HILTI CORE DRILL 200 BS / BI

  • Rio Grande, Puerto Rico, United States
  • Jan 30th
BLUEROCK® Model Z1S - 4" Core Drill Stand - Concrete Coring - NEW for Model Z-1

BLUEROCK® Model Z1S - 4" Core Drill Stand - Concrete Coring - NEW for Model Z-1

  • Seattle, Washington, United States
  • Jan 30th
HILTI Diamond core bit DD-B 1.3/8"/16" Item #2027498 ~ 35mm x 410mm

HILTI Diamond core bit DD-B 1.3/8"/16" Item #2027498 ~ 35mm x 410mm

  • Jackson Heights, New York, United States
  • Jan 30th
HILTI DD-100 wet/dry system hand held diamond coring system HUGE & NICE (344)

HILTI DD-100 wet/dry system hand held diamond coring system HUGE & NICE (344)

  • Costa Mesa, California, United States
  • Jan 30th
NEW BLUEROCK® Model Z1S - 4" Core Drill Stand - Concrete Coring

NEW BLUEROCK® Model Z1S - 4" Core Drill Stand - Concrete Coring

  • Seattle, Washington, United States
  • Jan 30th
Replacement Brushes for 14" SDT-350 Wet Core Drill

Replacement Brushes for 14" SDT-350 Wet Core Drill

  • Temperance, Michigan, United States
  • Jan 30th
Diamond Core Drill Bit 25MM Dry 1"

Diamond Core Drill Bit 25MM Dry 1"

  • Temperance, Michigan, United States
  • Jan 30th
Dimas Hand held Core Drill Model DM225 made by Target HD6

Dimas Hand held Core Drill Model DM225 made by Target HD6

  • Chicago, Illinois, United States
  • Jan 30th
1 1/2" DIAMOND TIPPED CORE DRILL BIT CONCRETE STONE MASONRY 10" LONG

1 1/2" DIAMOND TIPPED CORE DRILL BIT CONCRETE STONE MASONRY 10" LONG

  • Loves Park, Illinois, United States
  • Jan 30th
SDT Replacement Brushes for 8" SDT 185 Wet Core Drill Bore Rig and Stand

SDT Replacement Brushes for 8" SDT 185 Wet Core Drill Bore Rig and Stand

  • Erie, Michigan, United States
  • Jan 30th
NEW- 10" Diamond WET Coring Bit For Concrete Core Drill by BLUEROCK ® Tools

NEW- 10" Diamond WET Coring Bit For Concrete Core Drill by BLUEROCK ® Tools

  • Seattle, Washington, United States
  • Jan 30th
Hilti DD-C T2 Diamond Core Drilll Bit - 3/8" x 6" for DD EC 1.. RETAIL $267.67

Hilti DD-C T2 Diamond Core Drilll Bit - 3/8" x 6" for DD EC 1.. RETAIL $267.67

  • Las Vegas, Nevada, United States
  • Jan 30th

People who viewed this item also vieved

DEWALT 648984-00SV TRANSMISSION ASSEMBLY FOR DRILL

DEWALT 648984-00SV TRANSMISSION ASSEMBLY FOR DRILL

  • Brownsville, Texas, United States
  • Jun 5th
#C236- Makita Cordless 3/8" Drill Driver

#C236- Makita Cordless 3/8" Drill Driver

  • Gardner, Massachusetts, United States
  • Jun 5th
Genuine MAKITA SWITCH for TD 0101 650613-3

Genuine MAKITA SWITCH for TD 0101 650613-3

  • Tallinn, Harjumaa, Estonia
  • Jun 5th
Metabo 1/2-in Corded Hammer Drill Side Handle Woodworking Cutting Powerful Tool

Metabo 1/2-in Corded Hammer Drill Side Handle Woodworking Cutting Powerful Tool

  • United States, United States
  • Jun 6th
Makita Rotary Hammer Drill HR2811F with 6 bits and 3 chisels

Makita Rotary Hammer Drill HR2811F with 6 bits and 3 chisels

  • Las Vegas, Nevada, United States
  • Jun 6th
BOSCH HEAVY DUTY HAMMER DRILL CASE (Case for 11223evs or 11245evs)

BOSCH HEAVY DUTY HAMMER DRILL CASE (Case for 11223evs or 11245evs)

  • Urbana, Illinois, United States
  • Jun 6th
Irwin 88805 5/16" Speedbor Spade Bit

Irwin 88805 5/16" Speedbor Spade Bit

  • Goodyear, Arizona, United States
  • Jun 11th
2 ea. Irwin 5026009 3/8" X 4" Rotary Masonry Carbide Tip Drill Bits

2 ea. Irwin 5026009 3/8" X 4" Rotary Masonry Carbide Tip Drill Bits

  • Goodyear, Arizona, United States
  • Jun 11th
3 ea. 60513 Irwin 13/64" Jobber Length HSS Drill Bits

3 ea. 60513 Irwin 13/64" Jobber Length HSS Drill Bits

  • Goodyear, Arizona, United States
  • Jun 11th
Vintage Star RotrtWist Carbide Tipped Masonry Rotary Hammer 1/2" Drillbit 1435

Vintage Star RotrtWist Carbide Tipped Masonry Rotary Hammer 1/2" Drillbit 1435

  • La Crosse, Wisconsin, United States
  • Oct 24th
M12 FUEL 12-Volt Lithium-Ion Brushless 1/2 in. Hammer Drill/Driver Kit + Speaker

M12 FUEL 12-Volt Lithium-Ion Brushless 1/2 in. Hammer Drill/Driver Kit + Speaker

  • Huntington Beach, California, United States
  • Oct 24th
M12 12-Volt Lithium-Ion Cordless 3/8 in. Hammer Drill/Driver Kit + Impact Driver

M12 12-Volt Lithium-Ion Cordless 3/8 in. Hammer Drill/Driver Kit + Impact Driver

  • Huntington Beach, California, United States
  • Oct 24th
Dw272 VSR DRYWALL SCREWDRIVER

Dw272 VSR DRYWALL SCREWDRIVER

  • San Bernardino, California, United States
  • Nov 6th
Hilti SD 4500A13 Drywall Screwdriver

Hilti SD 4500A13 Drywall Screwdriver

  • Irving, Texas, United States
  • Nov 7th
DeWalt DCF620 20v Cordless Drywall Screwgun Power Tool 567346 E34

DeWalt DCF620 20v Cordless Drywall Screwgun Power Tool 567346 E34

  • Shorewood, Illinois, United States
  • Nov 7th
2807-20 M18 FUEL HOLE HAWG Brushless Lithium-Ion 1/2 in. Cordless Right Angle

2807-20 M18 FUEL HOLE HAWG Brushless Lithium-Ion 1/2 in. Cordless Right Angle

  • Springfield, Illinois, United States
  • Jun 21st
Milwaukee M18 SUPER HAWG 1/2" Right Angle Drill TOOL-ONLY 2809-20 BRAND NEW

Milwaukee M18 SUPER HAWG 1/2" Right Angle Drill TOOL-ONLY 2809-20 BRAND NEW

  • New Bedford, Massachusetts, United States
  • Jun 22nd
Milwaukee 2708-20 Brushless Hole Hawg Right Angle Drill w Batt. & Charger, a-x

Milwaukee 2708-20 Brushless Hole Hawg Right Angle Drill w Batt. & Charger, a-x

  • Evansville, Indiana, United States
  • Jun 23rd

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies