Minarik Drives Dc240-36/48-4q For 3.6 To 7.2 Hp 36v Or 48v Dc Motors 240 Amps

US $175.00

  • Springville, Utah, United States
  • Feb 21st
These are Minarik Drives DC240-36/48-4Q motor controllers. These were purchased as backup units for an industrial project in case any of the production controllers failed.  The project has been discontinued, and these were never used.  They have been sitting on a shelf for about two years, so the packaging is dusty and has been opened, but the controllers are new and 100% guaranteed. Complete documentation can be found at the manufacturer's site here Included is: The Minarik Drives DC240-36/48-4Q motor controller Original box No other items are included (the potentiometer that usually comes with this item is not included). Manufacturer information: Four Quadrant Control: Simple Reversing and Braking via a Switch Closure to the Drive High Continuous Current: Up to 120 Amps Continuous, Robust Bus Bars used to Handle the Current Max One Min. Peak Current: 240 Amps Output 100% of DC Input: Compared to 90% Output of Similar Units on the Market Short Circuit Protection: Unit Protects Itself against a Shorted Motor The DC-4Q series of drives are DC in/DC out PWM chassis drives capable of four quadrant reversing and braking. This series of drives is ideal for portable battery powered equipment. The DC-4Q has the ability to maintain variable speed even as battery decreases and has a sleep mode for extended battery life while not in use. The four quadrant capability allows simple connections for fast reversing and/or braking without the need for bulky contactors or braking resistors. The 1.01 form factor produces clean DC output for efficient and quiet motor operation. Like all Minarik Drives products, these units are built in the USA. The DC-4Q series of drives have adjustments for IR Compensation, Motoring Current Limit, Regenerative Current Limit, Forward Max Speed, Reverse Max Speed, Min Speed, Deceleration and Acceleration Time. These drives are microprocessor based meaning these ranges can be reprogrammed to meet any custom needs. The DC-4Q series also has Power and Fault LEDs, including current limit, under voltage, overheat and short circuit. The DC-4Q is available in two models, one for 12-24V systems, the other is designed for 36-48V systems. For simplicity and safety, no jumpers or switches are required for selecting voltages. Sleep Mode: Extended Battery Life On Board Calibration: Calibrate Using On Board Non-Interactive Trimmer Pots, No Programming or Additional Accessories are Needed Inhibit Circuit: Convenient for Remote Starting and Stopping 1.01 Form Factor: Clean DC Output for Efficient and Quiet Motor Operation at a 16kHz PWM Frequency Fan Accessory: Optional Field Installable Fan Kit Increases Continuous Current Rating at 160 Amps Precharge Circuit: Optional Contactor can be Used to Provide Soft Starts and Protection against Runaway LED Outputs: Power, Current Limit, Under Voltage, Over Voltage, Overheat and Short Circuit Temperature Sensor: Current Limit Automatically Reduced if Controller Heats Up Specifications for Minarik Drives DC240-36/48-4Q Item Number:   DC240-36/48-4Q Brand:   Minarik Drives Item Category:   Drives Subcategory:   DC Series:   DC-4Q   Output Armature VDC:   36/48 Volts DC        Max HP @ 36VDC Armature:   3.6 Horsepower   Max HP @ 48VDC Armature:   7.2 Horsepower   Max Armature Amps DC:   240 Amps   Operator Controls:   Built In   Package:   Chassis   Temperature Range (F):   32 to 104 Degrees F   H x W x D (in.):   2.5 x 6 x 5.25   Net Weight:   2 lb 8 oz   Gross Weight:   2 lb 8 oz
Old inventory, box opened and dusty, but never used. 100% functional guaranteed.
Brand Minarik Drives
MPN DC240-36/48-4Q
Model DC240-36/48-4Q

Directions

Similar products from DC Motor Speed Control Systems

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies