MITUTOYO DIGITAL ELECTRONIC DIGIMATIC INDICATOR MACHINIST INSPECTION (DE - DW), US $65.99 – Picture 0

MITUTOYO DIGITAL ELECTRONIC DIGIMATIC INDICATOR MACHINIST INSPECTION (DE - DW), US $65.99 – Picture 1

MITUTOYO DIGITAL ELECTRONIC DIGIMATIC INDICATOR MACHINIST INSPECTION (DE - DW), US $65.99 – Picture 2

MITUTOYO DIGITAL ELECTRONIC DIGIMATIC INDICATOR MACHINIST INSPECTION (DE - DW), US $65.99 – Picture 3

MITUTOYO DIGITAL ELECTRONIC DIGIMATIC INDICATOR MACHINIST INSPECTION (DE - DW), US $65.99 – Picture 4

MITUTOYO DIGITAL ELECTRONIC DIGIMATIC INDICATOR MACHINIST INSPECTION (DE - DW), US $65.99 – Picture 5

MITUTOYO DIGITAL ELECTRONIC DIGIMATIC INDICATOR MACHINIST INSPECTION (DE - DW), US $65.99 – Picture 6

Mitutoyo Digital Electronic Digimatic Indicator Machinist Inspection (de - Dw)

US $65.99

Arlington, Texas, United States
Jan 30th

Open on mobile:
QR code

Preset zero-set, inch/mm. +/- counting, on the go. Go/No-Go functions. ABS sensor. Satin Chrome spindl and shank. Provided with a data output port for SPC activity. Extra large LCD with .335" high digits. Mitutoyo digital indicator. Silky smooth. .0001" to .5000". Tip not included. All buttons work. I am sure you will enjoy this precision indicator. It's name ensures it's quality. Battery 357 included. A special version of the IDC Type Digimatic Indicator able to output directly to a Programmable Logic Controller (PLC). Features • Direct output for a PLC. Voltage power supply is DC 12-24V. • Absolute Encoder Technology. • PRE-SET-Recall (ABS) and Hold-Reset via input signal. • GO/±NO-GO tolerance judgement is indicated by LCD & red/green LED and is output to the PLC. • Sampling frequency is 50 times/sec. • Origin setting retained until re-set (even after power off). • IP-54 dust and water resistant. • Conforms to EC directives and the following standards: Electromagnetic Compatability (EMC) Directive (89/336/EEC) EN55011:1992 Group 1 Class A EMC emission EN50082-2:1995 Industrial environment EMC immunity IDC Signal Digimatic Indicator with Absolute Encoder Order No. 543-282 543-283 Range 0–.5" 0–12.7mm LCD Resolution .00005" .0001" 0.001mm 0.001mm Accuracy (20°C) ±.00012"/3µm Quantifying error ±1count Measuring Force 2N or less Steam Diameter 3/8" DIA Contact Point .16" (DIS.). Steel Ball 900032 Power Supply DC 12-24V ±10% (from connecting cable) Current Consumption 30mA or less Output NPN O/C (Output current: 30mA or less, Output voltage: 24V or less Input No-voltage input (Input current: less than 10mA) Functions ZERO/ABS, PRESET/SET, TOL, MODE, +/-(Switching the counting direction) Note: The IDC Signal Type Digimatic Indicators do not provide standard digimatic output for SPC

Condition	Seller refurbished : An item that has been restored to working order by the eBay seller or a third party not approved by the manufacturer. This means the item has been inspected, cleaned, and repaired to full working order and is in excellent condition. This item may or may not be in original packaging. See the seller’s listing for full details.
Seller Notes	“Accurate. 100% stock inspection capability. Clean, oiled, new battery. Works as desired.”