US $899.00
Condition | Used
:
An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
|
Seller Notes | “unit worked good. electric cord protector by handle is cracked but not the cord itself and a cut in cord further down but not into the wire. Taped over.” |
Directions
Similar products from Tools for Fabrication Equipment
Punch Press Benchmaster 7.5 Ton
DC Morrison Keyseater k 1-1/4" K894618 Year: 1989* (28756)
DME AIR POPPET AIR VALVE D-M-E INJECTION MOLD HASCO NATIONAL
Milling Machine Way Cover Accordian protective cover MPC DUST COVER
PHI 4" Ram x 4000 LB Force Hydraulic Press
PRECO model PA-6 with 4" Ram x 4000 LB Force HYDRAULIC PRESS
NICE NIAGARA 18" STRAIGHTENER MODEL 275-7-18 220 VOLTS
Unitool AH 1 1/4 Used With .410" Punch and Die
Fatigue Technology FT-200 Power Pack and MB-30 Cold Expansion Puller
Proto Speed Handle Ratchet- Aircraft,Aviation Tools
lockformer pittsburgh lock hvac duct machine 24ga
Two hole pins. Minis. Flange Alignment pins. Aluminum.1/4"X 1-1/8" Knurled
Two Hole Pins. Lot. (5) Flange Alignment. Small. Aluminum.1/2"X 1-1/8" Knurled
J A Richards Multiform Steel Rule Die Bender 5HDSB 5841 -- NO RESERVE
Table Top Shear 12" Blade Hermes Paper Accu cutter
Table Top Metal Shear 12" Blade Accu cutter 2001EVO
People who viewed this item also vieved
Lot of 4 Duckbill style Lathe Dogs size 3 3/4" machinist tools
South Bend Universal Tool Block with Knurling Tool
Lot of 8 Old Duckbill style Lathe Dogs range 3"--1 1/8" machinist tools
LOT OF 5 HSS STAGGERED & STRAIGHT TOOTH MILLING CUTTERS 3" TO 6" WITH 1" BORE
6 HSS STAGGERED & STRAIGHT TOOTH MILLING CUTTERS 3" TO 3-7/8" WITH 1-1/4" BORE
LOT OF 4 HSS HEAVY DUTY MILLING CUTTERS 6" TO 8" WITH 1" TO 1-1/4" BORE UTD
burr king grinder drive baring brand new belt grinder knife making
burr king 760 grinder rest belt grinder knife making
burr king 760 internal grinding attachment belt grinder knife making
Pemserter 6 ton Pem Insertion Machine Series 4! Excellent
Pemserter 5 ton Pem Insertion Machine! Excellent
Cadillac Roll Stamping Press 54 Hydraulic 240v 3ph Straightening Model T 3000psi
ROCKWELL DELTA DRILL PRESS START STOP SWITCH PUSH BUTTON
TAPPING HEAD, TAPMATIC SPD-3, #4 TO 1/4" TAPS
POWERMATIC 1150 15" DRILL PRESS QUILL CLAMP CASTING
ingersoll milling cutter new sp6h 2 inch
B10 ROUND BRONZE PAD SET 3/8", 3/32". 2PCS 031815-20
B10 ROUND BRONZE PAD SET 1/4", 3/8", 3/32", 5/16". 4PCS 031815-19
H & G CHASERS 100 SERIES SIZE 1/4"-20 RIGHT HAND
EDM fluid, 55 gallon drum, dielectric oil
Erowa ER-017532 Slotted compact holders. 3R, Hirschman, Meca
26" DoAll variable speed vertical bandsaw, power feed, remanufactured
1/16" to 1" Doall Blade Welder, 208 Volt Single Phase
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Accept All Cookies