+ Post new Ad
Muskegon - Large Spade Drill Holder with Insert - Series F - # 13775, US $480 – Picture 0
Muskegon - Large Spade Drill Holder with Insert - Series F - # 13775, US $480 – Picture 0

Muskegon - Large Spade Drill Holder With Insert - Series F - # 13775

US $480

  • Linden, New Jersey, United States
  • Jun 10th
Open on mobile:
QR code
You are purchasing the following: Muskegon - Large Spade Drill Holder with Insert - Series F - # 13775 This is an older Muskegon spade drill holder with an insert for a lathe.  The insert included is 3-1/2" wide (we are unsure of the make of the insert included). If you are unfamiliar with the sizes associated with the model numbers for these pieces, please contact us for measurements before purchasing. This spade drill holder is in used, but good condition.  This was made to last and besides some light tarnish on the part, there are no major condition issues.  Please review the photos provided for this listing to get an idea of the condition of this part. If you have any questions or concerns regarding this item, please contact us before purchasing. Thank you!

Directions

Similar products from Drilling Heads & Tool Holders

sandvik boring bar small ccmt21.51 inserts 3/4 shank 3/8 bore

sandvik boring bar small ccmt21.51 inserts 3/4 shank 3/8 bore

  • Hubbard, Oregon, United States
  • Jun 10th
Carbide LH Boring Bar .230" Bore x .70" Depth x 5/16" Shank x 2-1/2" OAL [590]

Carbide LH Boring Bar .230" Bore x .70" Depth x 5/16" Shank x 2-1/2" OAL [590]

  • Saint Louis, Missouri, United States
  • Jun 10th
KENNAMETAL LATHE BORING BAR A16-DCLNR4 NG2 STK 9933

KENNAMETAL LATHE BORING BAR A16-DCLNR4 NG2 STK 9933

  • Wadley, Alabama, United States
  • Jun 10th
P.H. HORN CARBIDE GROOVING BAR M313 0012 01A STK9336

P.H. HORN CARBIDE GROOVING BAR M313 0012 01A STK9336

  • Wadley, Alabama, United States
  • Jun 10th
1/2" MOORE JIG BORE HOLDER ...GOOD CONDITION

1/2" MOORE JIG BORE HOLDER ...GOOD CONDITION

  • San Clemente, California, United States
  • Jun 10th
CRITERION BORING HEAD ...GOOD WORKING CONDITION 1/2 TOOLS

CRITERION BORING HEAD ...GOOD WORKING CONDITION 1/2 TOOLS

  • San Clemente, California, United States
  • Jun 10th
CRITERION HOLDER 1" SHANK, 7/8' 20 THREAD GOOD CONDITION.

CRITERION HOLDER 1" SHANK, 7/8' 20 THREAD GOOD CONDITION.

  • San Clemente, California, United States
  • Jun 10th
SIR/SNR 12x150mm Left+Right Thread Boring Bar Holder With 11 IR+ER 1/4" Inserts

SIR/SNR 12x150mm Left+Right Thread Boring Bar Holder With 11 IR+ER 1/4" Inserts

  • CN, China
  • Jun 10th
SIR/SNR 16x180mm Left+Right Thread Boring Bar Holder With 16 IR+ER 3/8" Inserts

SIR/SNR 16x180mm Left+Right Thread Boring Bar Holder With 16 IR+ER 3/8" Inserts

  • CN, China
  • Jun 10th
Muskegon - Large Spade Drill Holder - Series E - # 1377

Muskegon - Large Spade Drill Holder - Series E - # 1377

  • Linden, New Jersey, United States
  • Jun 10th
CLEAN SANDVIK 5/16" CARBIDE SHANK COOLANT BORING BAR W/ CCMT KC910 INSERTS

CLEAN SANDVIK 5/16" CARBIDE SHANK COOLANT BORING BAR W/ CCMT KC910 INSERTS

  • Chino, California, United States
  • Jun 10th
J H Williams Boring Bar Holder TH-9

J H Williams Boring Bar Holder TH-9

  • Crothersville, Indiana, United States
  • Jun 10th
A570-3C D16 10-25 5723029 ANTI-VIBRATION BORING BAR / 570-SCLCR-25-09 5764333

A570-3C D16 10-25 5723029 ANTI-VIBRATION BORING BAR / 570-SCLCR-25-09 5764333

  • Glendale, Arizona, United States
  • Jun 10th
Iscar Integral Shank "F Type" Face Grooving Holders SGFFR 25-100-5

Iscar Integral Shank "F Type" Face Grooving Holders SGFFR 25-100-5

  • Rochester, New York, United States
  • Jun 10th
[7] VINTAGE BRASS "BLOW TOURCH TIP" TOOL / COAT / RE-PURPOSE HOLDERS - L@@K!!!

[7] VINTAGE BRASS "BLOW TOURCH TIP" TOOL / COAT / RE-PURPOSE HOLDERS - L@@K!!!

  • Rochester, New York, United States
  • Jun 10th
Kennametal TBH50A 0.0001" Grad High Precision Boring Head 1" Shank WL14.3.4

Kennametal TBH50A 0.0001" Grad High Precision Boring Head 1" Shank WL14.3.4

  • Perth, Ontario, Canada
  • Jun 10th
Armstrong 1B Boring Bar Tool Post Metal Lathe Southbend Clausing Logan Jet Grizz

Armstrong 1B Boring Bar Tool Post Metal Lathe Southbend Clausing Logan Jet Grizz

  • Yorktown, Virginia, United States
  • Jun 10th
Armstrong 1B Boring Bar Tool Post Metal Lathe Southbend Clausing Logan Jet #2

Armstrong 1B Boring Bar Tool Post Metal Lathe Southbend Clausing Logan Jet #2

  • Yorktown, Virginia, United States
  • Jun 10th
Valenite Boring Bar Mill Milling Machine Metal Lathe Tool Indexable Carbide

Valenite Boring Bar Mill Milling Machine Metal Lathe Tool Indexable Carbide

  • Yorktown, Virginia, United States
  • Jun 10th
Kaiser EW 2 3/4"-3 15/16" Boring Head Tool Holder 312.611 312.615

Kaiser EW 2 3/4"-3 15/16" Boring Head Tool Holder 312.611 312.615

  • Mooresville, North Carolina, United States
  • Jun 10th

People who viewed this item also vieved

8 Pcs Precision R8 End Mill Holder Set NEW

8 Pcs Precision R8 End Mill Holder Set NEW

  • Sterling Heights, Michigan, United States
  • Jan 30th
Stainless steel vacuum flexible flex braided out dia. 2 3/4" , in dia. 1 3/8" t

Stainless steel vacuum flexible flex braided out dia. 2 3/4" , in dia. 1 3/8" t

  • Binghamton, New York, United States
  • Jan 30th
Albrecht Toolholder APC14-BT40

Albrecht Toolholder APC14-BT40

  • North Kingstown, Rhode Island, United States
  • Jan 30th
LAST ONE! USED YMZ JAPAN BT-40 SINGLE ANGLE TG-150 COLLET CHUCK BT40-075150-135

LAST ONE! USED YMZ JAPAN BT-40 SINGLE ANGLE TG-150 COLLET CHUCK BT40-075150-135

  • Fairfield, Iowa, United States
  • Jan 30th
LOT 7 NEW IGUS LSI-1618-12 MECHANICAL BUSHING 1X1-1/4XX3/4IN ASSEMBLY B274998

LOT 7 NEW IGUS LSI-1618-12 MECHANICAL BUSHING 1X1-1/4XX3/4IN ASSEMBLY B274998

  • Buffalo, New York, United States
  • Jan 30th
NEW CAMCO 400RM-24 MECHANICAL BUSHING 1-1/2 IN BORE D221970

NEW CAMCO 400RM-24 MECHANICAL BUSHING 1-1/2 IN BORE D221970

  • Delta, Ohio, United States
  • Jan 30th
HPI Pioneer BT30 1" Shell Mill Holder 1.77" **NEW**

HPI Pioneer BT30 1" Shell Mill Holder 1.77" **NEW**

  • Elk Grove Village, Illinois, United States
  • Jan 30th
HPI Pioneer BT30 1/2 0.5000" Shell Mill Holder 1.38" **NEW**

HPI Pioneer BT30 1/2 0.5000" Shell Mill Holder 1.38" **NEW**

  • Elk Grove Village, Illinois, United States
  • Jan 30th
Phase I I drill chuck arbor R8 W/6JT TAPER

Phase I I drill chuck arbor R8 W/6JT TAPER

  • Alvin, Texas, United States
  • Jan 30th
New Chuck for HILTI Rotary Hammer Drills TE1, TE5, TE6, TE7, TE14, TE15, SDS typ

New Chuck for HILTI Rotary Hammer Drills TE1, TE5, TE6, TE7, TE14, TE15, SDS typ

  • ??, ??, China
  • Jan 30th
Wico C long Lug John Deere Magneto Refurbished

Wico C long Lug John Deere Magneto Refurbished

  • Camas, Washington, United States
  • Jan 30th
International Harvester TD6..,MD Diesel Starting Fairbanks Morse Magneto

International Harvester TD6..,MD Diesel Starting Fairbanks Morse Magneto

  • Camas, Washington, United States
  • Jan 30th
Sunnen hone K20-619AB

Sunnen hone K20-619AB

  • Ware, Massachusetts, United States
  • Jan 30th
Sunnen hone 2H-P28 2125 WF

Sunnen hone 2H-P28 2125 WF

  • Ware, Massachusetts, United States
  • Jan 30th
1-1/2" DIA SANDVIK CAPTO C4 CLAMPING CLAMP UNIT C4-NC3000-10020-A24 LOT C10891

1-1/2" DIA SANDVIK CAPTO C4 CLAMPING CLAMP UNIT C4-NC3000-10020-A24 LOT C10891

  • Dayton, Ohio, United States
  • Jan 30th
MISCELLANEOUS SIZES OF SUNNEN TRUING SLEEVES (13) PIECES TOTAL LOT C9852

MISCELLANEOUS SIZES OF SUNNEN TRUING SLEEVES (13) PIECES TOTAL LOT C9852

  • Dayton, Ohio, United States
  • Jan 30th
# 3 MORSE TAPER KWIK SWITCH 200 MASTER HOLDER WITH COLLET CHUCK & (5) COLLETS

# 3 MORSE TAPER KWIK SWITCH 200 MASTER HOLDER WITH COLLET CHUCK & (5) COLLETS

  • Dayton, Ohio, United States
  • Jan 30th
Komet B3013020 ABS 40 FF Dia. 56 - 66 Micro Adjustable Boring Head

Komet B3013020 ABS 40 FF Dia. 56 - 66 Micro Adjustable Boring Head

  • Millstone Township, New Jersey, United States
  • Jan 30th
GMT Spindle Motor - Air Cooled 1.5kW ( 2 HP ) ER20 CNC Router Mill

GMT Spindle Motor - Air Cooled 1.5kW ( 2 HP ) ER20 CNC Router Mill

  • Lititz, Pennsylvania, United States
  • Jan 30th
Professional GMT Spindle Motor Air Cooled 0.8 kW (1HP) 220V ER16 CNC Router Mill

Professional GMT Spindle Motor Air Cooled 0.8 kW (1HP) 220V ER16 CNC Router Mill

  • Lititz, Pennsylvania, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies