New Audiocodes 910-0701-001 Ld809-eh Pci Express

US $1,600.00

United States
Jan 30th

Open on mobile:
QR code

NEW Audiocodes 910-0701-001 Ld809-Eh Pci ExpressBRAND NEW 3.11 FIRMWIRE The Audiocodes LD1609-EH PCI Express is designed for analog networks, the SmartWORKS LD has both passive and terminate network interface capabilities. Featuring programmable voltage thresholds and loop reversal detection, the SmartWORKS LD is easily configured to accommodate variations across analog networks. The LD series can be used to initiate as well as terminate calls. When configured as an interactive resource, phone lines can directly connect to and terminate on the LD blades. Standard ring detection is available. More Information System Requirements Hardware Requirements Pentium 4/equivalent · 2 GHz, PCI motherboard or passive backplane with 3.3V power supply, PCI 2.2 bus Operating Systems Windows 2000 · Windows XP Windows 2003 32 bit· Linux (Call for variant details), Vista (planned) Technical Specifications Max blades per system: 16 · Max ports per system: Up to 512, · Resource Sharing Bus H.100 (809, 1609, and 2409 only) Physical Characteristics Form Factor: Full or Half-size PCI card (PCI express also available-full size only) Environmental Conditions Operating Temperature: 0C to +50C · Storage Temperature: -20C to +85C · Humidity: 8% to 80% non- condensing · Storage humidity: 8% to 80% non-condensing Host Interface (PCI 2.2) Bus Compatibility: Complies with PCISIG Bus · Specifications: Rev. 2.2 · Bus Speed: 33 MHz Bus Mode: 32 bit bus master/target (PCI express available-1x connector) Telephony Interfacing Telephony Interface Signal/Noise ratio: 35dB referenced to -15dBm · Idle channel noise: Less then 20dBrnc Crosstalk coupling: Less then -70 dB (0dBm, 1004Hz) Frequency response: 300Hz to 3400Hz +/-3dB Ring detection: 30Vrms (min), 16 to 68Hz · REN: < 0.5 · Echo return loss: 28 dB +/- 3dB @1400Hz Telephony Interface (Passive Mode) Trunk Type: Loop Start/Ground Start · Trunk Interface: High Impedance (Z) · AC Impedance: 18 kOhms Voltage Detection: Two software programmable thresholds - Range: -61V to + 61V, Accuracy +/- 2V Telephony Interface (Terminate Mode) Trunk Type: Loop Start · AC Impedance: Software Selectible (FCC, EU, China, Australia) Loop Detection: Off Hook: 8mA (max) LD409, LD809 · On Hook: 6mA (min) LD409, LD809 OFF Hook: 11mA (max) LD1609, LD2409 · On Hook: 9mA (min) LD1609, LD2409 Telephony Connectors LD409, LD809: RJ-14 · LD809X · LD1609, LD2409: RJ-21x (no PCI Express in 409 model) Analog Jack/Ports Audio Connector · LD409: 4 ports, no H.100 · LD809: 8 ports · LD1609: 16 ports LD2409: 24 ports Audio Signal Receive range: -68 dBm to + 3 dBm · Input gain control: +24 to -50 dB · Silence Detection: API Programmable Transmit volume control: +24 to -50 dB to H.100 Software SDK AudioCodes Native SmartWORKS API Tone Detection DTMF digits: 0 - 9, *, #, A, B, C, D · MF Detection: R1 & R2 · R1 digits: Per Q.151 Call Progress Monitoring (Terminate) Programmable tones: 20 · Bandpass filters: 10 · Filters per tone: 1, 2 or 3 · Cycles: 0 to 255 SIT tones: Yes, programmable frequencies and duration · Answering Machine Detect: Yes Voice Processing Caller ID: V.23 & Bell 202 · DTMF Detector: Primary & Secondary channel Echo Cancellation (Terminate) Echo Cancellation (Terminate) Input Dynamic Range: G.165 compliant · Double-talk detection: G.165 compliant End path delay: 8ms Tone Dialing (Terminate) DTMF digits: 0 – 9, *, #, A, B, C, D · Frequency variation: Less then 1 Hz Encoding & Decoding G.723.1, G.723.1, G.729A, GSM 6.10, Microsoft GSM, G.726, G.726, OKI, G.726, ?-law or A-law per G.711 8 bit linear PCM (signed & unsigned), 6 Khz 16 bit linear PCM (signed), 16 bit linear PCM (signed & unsigned) Wave file formats: Microsoft GSM, Linear signed, 8 & 16-bit PCM Digitization selection: Programmable per channel, independent for encode and decode Power Requirements 4 or 8 Channel (PCI 2.2) + 3.3 VDC: 1.0 A, +5 VDC: n/a, -12 VDC: n/a, +12 VDC: 100 mA, Watts (Max): 4.5W 16 Channel (PCI 2.2) + 3.3 VDC: 1.3 A, +5 VDC: n/a, -12 VDC: n/a, +12 VDC: 200 mA, Watts (Max): 6.7W 24 Channel (PCI 2.2) + 3.3 VDC: 1.5 A, +5 VDC: n/a, -12 VDC: n/a, +12 VDC: 220 mA, Watts (Max): 7.6W 8 Channel (PCI Express) + 3.3 VDC: 1.6 A (RJ-21 connector only) 16 Channel (PCI Express) + 3.3 VDC: 2.1 A 24 Channel (PCI Express) + 3.3 VDC: 2.3 A Certifications Safety EN60950 IEC60950 (third edition) UL60950 · CAN · CSA-C22.2 No 60950-00 (third edition) Emissions EN55022 47 CFR FCC part 15 EN55024

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	AudioCodes
Model	LD809-EH