New Awi-v Industrial Belt Tension Tester Mechanical Tensioner Gauge Instrument

US $100.00

Littleton, Colorado, United States
Jan 31st

Open on mobile:
QR code

AWI-V Industrial Belt Tension Tester: An industrial belt tension tester capable of measuring force and services belts to 5" in width, and has a force range of 0-165 lbs (0-75 Kg.), and belt tension range of 0-2640 lbs (0-1200 Kg.). Recommended for use on 3V-3VX belts of 8 strands or more; 5V-5VX belts through 6 strands; 8V belts through 4 strands; and is fully applicable for C-CX belts through 4 strands; and D belts through 3 strands. SPECIAL NOTE: The AWI-V can also service multiple single stranded belt drives as well as banded belts. Operation: Uses the universally accepted method of determining belt tension by depressing the belt 1/64 of an inch per inch of span. This results in an "F" over "T" ratio of 1 to 16. The maximum tension capability of this instrument, therefore, is 16 times 35, or 560 lbs. Measure the length of span between sheave tangent points. Set the bottom of the large o-ring at the correct point (on "50" if it is a 50 inch span) and set the top (small o-ring) down against the instrument's flange. Depress the instrument downward at the center of the span until the large o-ring at the base of the instrument is in line with the tangent point of the drive. (This may be accomplished with a straight-edge, or a neighboring belt in a multiple belt drive.) Read the number of pounds of force indicated by the small o-ring on the plunger rod and multiply by 16 to determine belt tension. NOTE: Many belt manufacturers will specify the recommended plunger reading (in lbs. or kg.) for a specific application. In such cases, always follow the belt manufacturers' recommendation. Lockwood Enterprises, Inc. is the only distributor for belt tension testers in the United States. These instruments are manufactured IN THE UNITED STATES OF AMERICA by the original patent holder at the original manufacturing facility. Buy American, buy from Lockwood! We use United Sates Postal Service (USPS) 'Priority Flat Rate Shipping' for all orders domestic and worldwide. Most orders (99%) fall within the 4 lb./small box rate tier. Due to limitations of the eBay system, if you purchased a combination of items, please be sure to contact us to confirm the proper shipping fee and include your sales ID#. Therefore, you should expect: * Domestic (USA)=$8.15 US per order. * International=$19.95 US per order. If your order happens to exceed 4 lbs. and/or is larger than the 'small-box', and/or requires other special services like insurance, we will make the calculation and inform you prior to shipment/charge to your PayPal account. Be assured, we utilize the lowest possible rates and a very modest handling fee! We appreciate your business and desire your complete satisfaction. Best regards from all of us at Lockwood Enterprises, Inc.!

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	Lockwood Enterprises, Inc.
MPN	AWI-V Industrial Belt Tension Tester Mechanical
Model	AWI-V
Country/Region of Manufacture	United States