"New Condition" Contemporary Controls EISK8 8Port Copper-Fiber Ethernet Switch, US $75.00 – Picture 0

"New Condition" Contemporary Controls EISK8 8Port Copper-Fiber Ethernet Switch, US $75.00 – Picture 1

"New Condition" Contemporary Controls EISK8 8Port Copper-Fiber Ethernet Switch, US $75.00 – Picture 2

"new Condition" Contemporary Controls Eisk8 8port Copper-fiber Ethernet Switch

US $75.00

Glen Cove, New York, United States
Feb 14th

Open on mobile:
QR code

"New Condition" Contemporary Controls EISK8 8Port Copper-Fiber Ethernet Switch EISK8 Skorpion Fibre Switches Cost Effective, 100 Mbps-speed — Compact Size EISK8 Skorpion fibre switches are eight-port unmanaged Ethernet switches that provides 100 Mbps performance on all ports to accommodate a range of control devices and workstations commonly found in an automation project. For 10 Mbps legacy devices, the switches automatically reduce port-speed. These low-cost compact units have a rugged metal enclosure and are intended for installation in control panels using DIN-rail mounting. These are a plug-and-play Ethernet switches that require no configuration. All copper ports automatically configure their data rate and duplex using the Auto-negotiation protocol. Depending on the capability of the link partner, communication is set at 10 or 100 Mbps and at either half- or full-duplex. Each port accommodates either a straight-through or crossover cable using the Auto-MDIX protocol. Plug-and-Play operation 10BASE-T/100BASE-TX/100BASE-FX Shielded RJ-45 connectors Choice of fibre connectors Auto-negotiation of speed and duplex Auto-MDIX supports cable inversion Each unit is powered from a low-voltage source (either AC or DC). Redundant power connections are provided for back-up power schemes. LEDs assist in troubleshooting. DIN-rail mounting Rugged metal enclosure Diagnostic LEDs Enhanced EMC compliance UL 508 listed, c-UL listed, CE mark 24 VAC/VDC powered Specifications Power Requirements Operating Temperature Storage Temperature Relative Humidity Protection Mounting Shipping Weight Ethernet Communications LEDs Regulatory Compliance 10–36 VDC 6 W or 24 VAC ±10% 12 VA 47–63 Hz 0°C to 60°C–40°C to 85°C 10–95%, non-condensing IP30 TS-35 DIN-rail 1 lb (0.45 kg) IEEE 802.3 10/100 Mbps data rate using RJ-45 connectors, 100 m (max) Power “L” LEDs “D” LEDs Green = power OK Green = 100 Mbps communication established Yellow = 10 Mbps communication established Flashing = data transmissions occurring Green = Full-duplex communication established Off = Half-duplex communication established CE Mark; CFR 47, Part 15 Class A; RoHS; UL 508 Industrial Control Equipment

“"New Condition" - 100% Working condition - No Box - Unit was Never Used”

Brand	Contemporary Controls
Model	EISK8-100T/FC Fibre