New Holland 488 Haybines - Qty 2, US $7,793.50 – Picture 0

New Holland 488 Haybines - Qty 2, US $7,793.50 – Picture 1

New Holland 488 Haybines - Qty 2, US $7,793.50 – Picture 2

New Holland 488 Haybines - Qty 2, US $7,793.50 – Picture 3

New Holland 488 Haybines - Qty 2, US $7,793.50 – Picture 4

New Holland 488 Haybines - Qty 2, US $7,793.50 – Picture 5

New Holland 488 Haybines - Qty 2, US $7,793.50 – Picture 6

New Holland 488 Haybines - Qty 2, US $7,793.50 – Picture 7

New Holland 488 Haybines - Qty 2, US $7,793.50 – Picture 8

New Holland 488 Haybines - Qty 2, US $7,793.50 – Picture 9

New Holland 488 Haybines - Qty 2

US $7,793.50

Belmont, Ohio, United States
Jan 30th

Open on mobile:
QR code

Qty 2 New Holland Haybines - Sold as a pair. Haybine #1 - Non-Operational - For Parts has good rims, stub guards good wobble transmission, good drive transmission, no bearings out anyplace, usable reel and all drive system to it. Machine will work but has so much use it was delegated to the parts category when the other haybine was purchased. No parts except PTO and lift cylinder were ever taken off as new one worked so well. Haybine #2 - Operational and was in use as recent as July 2014. It was not traded when we got the new discbine. It can be valuable as a backup in case of discbine problems. It has been the main mower for the last 5 years. Tires are tubeless and have 75% tread. It has good rubber on crushing rolls, all bearings are sound, wobble transmission is good, cylinder lifts as it should, swing tongue has the OME handy lock so machine can be folded and locked from tractor. We always used a 60 HP tractor but our old 1958 Oliver 550 with 40 HP will run it.

Condition

For parts or not working :

An item that does not function as intended and is not fully operational. This includes items that are defective in ways that render them difficult to use, items that require service or repair, or items missing essential components. See the seller’s listing for full details.

Seller Notes

“Qty 2 New Holland Haybines - Sold as a pair.Haybine #1 - Non-Operational - For Parts [Photos #2 - Front View,3 - Rubber Rollers, 4 - SN# Plate] For parts only. Ragged rubber rollers, rusty, no hydraulic cylinder, no PTO shaft, slightly out of line cutter bar. both tires are flat on good rims. not a good jack stand, bolted together swing tongue lock instead of EOM. Machine not used in 5 years.Haybine #2 - Operational [Photos #1,5-12]Unknown manufacture date. 2nd roll drive chain not on machine (works without it)several knife sections need replaced, No right side shield, PTO is old style without guard. Rubber on hydraulic hose has been roughed up from use last year. No right side point on bumper bar to part crop at end of cut.”