NEW IQ300FPW ICE QUBE INDUSTRIAL WATER WASH DOWN FILTERED AIR FAN COOLING UNIT, US $259.95 – Picture 0

NEW IQ300FPW ICE QUBE INDUSTRIAL WATER WASH DOWN FILTERED AIR FAN COOLING UNIT, US $259.95 – Picture 1

NEW IQ300FPW ICE QUBE INDUSTRIAL WATER WASH DOWN FILTERED AIR FAN COOLING UNIT, US $259.95 – Picture 2

NEW IQ300FPW ICE QUBE INDUSTRIAL WATER WASH DOWN FILTERED AIR FAN COOLING UNIT, US $259.95 – Picture 3

NEW IQ300FPW ICE QUBE INDUSTRIAL WATER WASH DOWN FILTERED AIR FAN COOLING UNIT, US $259.95 – Picture 4

New Iq300fpw Ice Qube Industrial Water Wash Down Filtered Air Fan Cooling Unit

US $259.95

Denver, Colorado, United States
Jan 29th

Open on mobile:
QR code

*THIS IS BRAND NEW IN THE BOX* IQ300FPW - Wash Down Filtered Fan System Washdown Filtered Fan Ice Qube's patented Wash Down Filtered Fan System is designed to eliminate the threat of water damage to enclosed electronics, even in work areas that require direct hose wash down. A powerful 155 CFM blower draws filtered ambient air into the enclosure to cool the enclosed electronics. The ONLY NEMA 4 and NEMA 4x rated washdown fan package with a UL listing available in the industry!IQ300FPW-126 120/60volts CFM310 3.8maxAMP 18.00"Hx10.50"Wx5.00"D Installation and Operation Instructions Wash Down Filtered Fan System has been designed for cooling electronic equipment housed within an enclosure - where the electronics can operate at temperatures slightly above ambient and the enclosure may be subjected to splashing water or hose-direct wash down. Each filtered fan system comes complete with intake and exhaust modules, serviceable intake filter, mounting hardware, gasket and power cord. Installation: ***Please read complete instructions thoroughly before beginning installation. *** Ice Qube’s wash down filtered fan systems ship to you fully assembled. The intake and exhaust modules have power cords. The inlet module has a serviceable polypropylene filter. This filter must be cleaned periodically , depending upon ambient conditions. To clean the filter, it is recommended to disconnect the electrical power from the intake module. Next, remove the filter cover panel on the front of the intake module by loosening the screws. Remove the filter by pulling the tab at the center of the filter. Clean the filter by soaking it in mild solution of detergent and water - then rinsing in clean, warm water. Use a Shop-Vac to remove excess water from the filter before returning it to the intake module. It is recommended to have an additional clean filter in stock to pr event excessive equipment downtime. 1. Prepare the enclosure by cutting a rectangle and drilling (6) holes for mounting each module to the enclosure. Openings are required for the intake and exhaust module power cords. (See Cut out drawings for rectangle size and hole locations) For best performance, it is recommended to install the intake near the bottom of the enclosure and the exhaust near the top of the enclosure on opposite sides. 2. Apply the provided gasket material to the perimeter of both intake and exhaust modules. (See Gasket Drawing). Apply to the side which has the mounting studs protruding. 3. Attach the intake and exhaust modules (gasket side toward enclosure) to the enclosure using the provided mounting hardware. Use a wrenc h to secure the nuts and bolts, slightly compressing the gasket material to form a seal. 4. Attach the power cords to a properly grounded receptacle of proper voltage and current inside of the enclosure. If a receptacle is not available inside of the enclosure, provide access for electrical power to be supplied to the fan. 5. After applying electrical power to the fan, it should begin operation immediately and continuously.

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	Ice Qube
Model	IQ300FPW