+ Post new Ad
NEW - Lot of Heavy Duty Lathe Parts Morse Taper LIVE CENTER, DRILL SLEEVES, ETC., US $330 – Picture 0
NEW - Lot of Heavy Duty Lathe Parts Morse Taper LIVE CENTER, DRILL SLEEVES, ETC., US $330 – Picture 0

New - Lot Of Heavy Duty Lathe Parts Morse Taper Live Center, Drill Sleeves, Etc.

US $330

  • London, Ontario, Canada
  • Jun 10th
Open on mobile:
QR code
NEW - Lot of Heavy Duty Lathe Parts Morse Taper LIVE CENTER, DRILL SLEEVES, ETC. As shown in pictures. These items are all new. Taken from a 3 month old facility. These parts would have cost over $3000 new. The lot includes EVERYTHING you see. The Dead Center or Live Center is 10 1/2" long. The holder for the live center is 5 1/2" x 7 1/2" and the hole in the center is 2 1/2". There is 2 live centers in this lot, both new. It also includes 4 Drill sleeves, the part numbers are, STM 5-6 (8 1/2" Long x 2 3/8" diameter x 1 1/2" opening), STM 2-5 (6 1/8" long x 1 11/16" diameter x 11/16" opening), MK 5-3 (6 1/8" long x 1 3/4" diameter x 15/16" opening), and also a Lathe Mandrels 1 5/16" x 8 1/4". Again you will get EVERYTHING shown in the pictures. All of our electronic parts are guaranteed and come with a 60 DAY REPLACEMENT WARRANTY. 100% Money Back Guarantee. FAST FREE SHIPPING! For USA and CANADA. EXPRESS & OVERNIGHT SHIPPING AVAILABLE UPON REQUEST IF NEEDED.

Directions

Similar products from Live Centers

(17) Lathe Dead Center Assortment Sizes Brands Variety Shank Configuration 36LBS

(17) Lathe Dead Center Assortment Sizes Brands Variety Shank Configuration 36LBS

  • Cornell, Illinois, United States
  • Jun 10th
USED POWERHOLD SFJ No. 1120 PRECISION MT5 LIVE CENTER with 45mm POINT DIAMETER

USED POWERHOLD SFJ No. 1120 PRECISION MT5 LIVE CENTER with 45mm POINT DIAMETER

  • Fairfield, Iowa, United States
  • Jun 10th
5/8" X #10 HS TAPER DRIVE SHANK

5/8" X #10 HS TAPER DRIVE SHANK

  • Sunman, Indiana, United States
  • Jun 10th
Grizzly H7964 Precision Long Nose Live Center, MT4

Grizzly H7964 Precision Long Nose Live Center, MT4

  • US, United States
  • Jun 10th
ROYAL TRI BEARING PRECISION LIVE CENTER W/ 3MT SHANK & 8" OVERALL LENGTH

ROYAL TRI BEARING PRECISION LIVE CENTER W/ 3MT SHANK & 8" OVERALL LENGTH

  • Chino, California, United States
  • Jun 10th
ARMSTRONG HIGH SPEED COBOLT LATHE 5/8" LOT OF 5 86-013

ARMSTRONG HIGH SPEED COBOLT LATHE 5/8" LOT OF 5 86-013

  • Sunman, Indiana, United States
  • Jun 10th
RITEN 65555 LIVE CENTER, 5 1/2 In PIPE NOSE W/ 5MT SHANK

RITEN 65555 LIVE CENTER, 5 1/2 In PIPE NOSE W/ 5MT SHANK

  • Chino, California, United States
  • Jun 10th
IMMACULATE! RITEN 65555 LIVE CENTER 5-1/2" PIPE NOSE W/ 5MT SHANK

IMMACULATE! RITEN 65555 LIVE CENTER 5-1/2" PIPE NOSE W/ 5MT SHANK

  • Chino, California, United States
  • Jun 10th
REBUILT! RITEN 65555 LIVE CENTER 5-1/2" BULL NOSE W/ 5MT SHANK

REBUILT! RITEN 65555 LIVE CENTER 5-1/2" BULL NOSE W/ 5MT SHANK

  • Chino, California, United States
  • Jun 10th
Three No. 3 Morse Taper Dead Centers (Inv.35002)

Three No. 3 Morse Taper Dead Centers (Inv.35002)

  • Portland, Connecticut, United States
  • Jun 10th
MACHINIST TOOLS LATHE MILL South Bend Head Stock Bull Gear ? 1 5/8" Center

MACHINIST TOOLS LATHE MILL South Bend Head Stock Bull Gear ? 1 5/8" Center

  • Morris Plains, New Jersey, United States
  • Jun 10th
Jarno 10 Half Dead Center Carbide Tipped Metal Lathe Brown Sharpe Cincinnati

Jarno 10 Half Dead Center Carbide Tipped Metal Lathe Brown Sharpe Cincinnati

  • Yorktown, Virginia, United States
  • Jun 10th
3: Jarno 10 Half Dead Center HSS Carbide Metal Lathe Brown Sharpe Cincinnati

3: Jarno 10 Half Dead Center HSS Carbide Metal Lathe Brown Sharpe Cincinnati

  • Yorktown, Virginia, United States
  • Jun 10th
MACHINIST TOOLS LATHE MILL South Bend Gear Lot 64T 60T & 56T 5/8" Center

MACHINIST TOOLS LATHE MILL South Bend Gear Lot 64T 60T & 56T 5/8" Center

  • Morris Plains, New Jersey, United States
  • Jun 9th
MACHINIST TOOLS LATHE MILL South Bend Gear Lot 52T 46T & 44T 5/8" Center

MACHINIST TOOLS LATHE MILL South Bend Gear Lot 52T 46T & 44T 5/8" Center

  • Morris Plains, New Jersey, United States
  • Jun 9th
MACHINIST TOOLS LATHE MILL South Bend Gear Lot 40T & 36T 5/8" Center

MACHINIST TOOLS LATHE MILL South Bend Gear Lot 40T & 36T 5/8" Center

  • Morris Plains, New Jersey, United States
  • Jun 9th
TAFT & PIERCE 52” Bench Center

TAFT & PIERCE 52” Bench Center

  • Euclid, Ohio, United States
  • Jun 9th
KM 40 Dead Center UT40F 264 11 003 7F (LOC1968A)

KM 40 Dead Center UT40F 264 11 003 7F (LOC1968A)

  • Laingsburg, Michigan, United States
  • Jun 9th
Improved Nielson 16JPD Lathe Live Center #7? Morse Taper Shank 5" Dia.

Improved Nielson 16JPD Lathe Live Center #7? Morse Taper Shank 5" Dia.

  • Clare, Michigan, United States
  • Jun 9th
Lathe Live Center #4? Morse Taper Shank 3" Dia.

Lathe Live Center #4? Morse Taper Shank 3" Dia.

  • Clare, Michigan, United States
  • Jun 9th

People who viewed this item also vieved

MACHINIST LATHE MILL 2 micro Starrett # 278 V Blocks with Clamps for Sherline

MACHINIST LATHE MILL 2 micro Starrett # 278 V Blocks with Clamps for Sherline

  • Morris Plains, New Jersey, United States
  • Jan 30th
PRESTIGE, Quadruple V-Block, 4-Way, 3- 3/4" x 2- 3/4" x 1- 3/8", Pair, /KK4/

PRESTIGE, Quadruple V-Block, 4-Way, 3- 3/4" x 2- 3/4" x 1- 3/8", Pair, /KK4/

  • Saint Louis, Missouri, United States
  • Jan 30th
Vintage Toolmaker Machinist Set-up Block 1 x 2 x 3

Vintage Toolmaker Machinist Set-up Block 1 x 2 x 3

  • Buffalo Grove, Illinois, United States
  • Jan 30th
NICE SMW AUTOBLOK KSZ-AZ-42 POWER OPERATED COLLET CHUCK CNC LATHE A5 MOUNT

NICE SMW AUTOBLOK KSZ-AZ-42 POWER OPERATED COLLET CHUCK CNC LATHE A5 MOUNT

  • Cleveland, Ohio, United States
  • Jan 30th
NEW 8 " 3 JAW LATHE CHUCK 0312

NEW 8 " 3 JAW LATHE CHUCK 0312

  • Montville, Ohio, United States
  • Jan 30th
Gibraltar - Manual Lathe Chucks - Type: Self-Centering Nominal - Size: 10"

Gibraltar - Manual Lathe Chucks - Type: Self-Centering Nominal - Size: 10"

  • Ogden, Utah, United States
  • Jan 30th
C Clamps, (2) Vintage 3" Wing Screw Knob C Clamps, Made in USA

C Clamps, (2) Vintage 3" Wing Screw Knob C Clamps, Made in USA

  • Saunderstown, Rhode Island, United States
  • Jan 30th
Bessey Welders Angle Clamp Welder Welding Vise Jaw Corner Bench Tool Jig Joints

Bessey Welders Angle Clamp Welder Welding Vise Jaw Corner Bench Tool Jig Joints

  • Bakersfield, California, United States
  • Jan 30th
63 pc 7/16" Slot 3/8" Stud HOLD DOWN CLAMP CLAMPING SET KIT for BRIDGEPORT MILL

63 pc 7/16" Slot 3/8" Stud HOLD DOWN CLAMP CLAMPING SET KIT for BRIDGEPORT MILL

  • New Haven, Michigan, United States
  • Jan 30th
CAT 40 Techniks 2 Chucks ER-32+ Collets 18 CNC FIT HAAS

CAT 40 Techniks 2 Chucks ER-32+ Collets 18 CNC FIT HAAS

  • Columbus, Ohio, United States
  • Jan 30th
NEW 5C Bison Lathe Collet Chuck 5" Plain Back

NEW 5C Bison Lathe Collet Chuck 5" Plain Back

  • Columbus, Ohio, United States
  • Jan 30th
Royal Pullback CNC Lathe 5C Collet Chuck Spindle A2-5 42053 Haas Fadal Samsung

Royal Pullback CNC Lathe 5C Collet Chuck Spindle A2-5 42053 Haas Fadal Samsung

  • Carrollton, Ohio, United States
  • Jan 30th
Lot of 26 Collets - Some are Chi-co Brand

Lot of 26 Collets - Some are Chi-co Brand

  • Ventura, California, United States
  • Jan 30th
Techniks 19/11-4127 Rigid Tap Collet

Techniks 19/11-4127 Rigid Tap Collet

  • Spencer, Indiana, United States
  • Jan 30th
200DA0343USA 11/32 Diameter DA Style Collet NEW USA 1 pc

200DA0343USA 11/32 Diameter DA Style Collet NEW USA 1 pc

  • Trenton, Michigan, United States
  • Jan 30th
Harig Grind All Indexing Grinding Fixture 360 degree, V-Block, Stops, Lathe

Harig Grind All Indexing Grinding Fixture 360 degree, V-Block, Stops, Lathe

  • Hopkins, Minnesota, United States
  • Jan 30th
2 Machinist Solid Angle Plates

2 Machinist Solid Angle Plates

  • Salem, New Hampshire, United States
  • Jan 30th
Jones & Lamson comparator stage fixture & 2 pcs. V-blocks

Jones & Lamson comparator stage fixture & 2 pcs. V-blocks

  • Addison, Illinois, United States
  • Jan 30th
T-SLOT CLEANER

T-SLOT CLEANER

  • Chino, California, United States
  • Jan 30th
TE-CO T-Slot Bolt Assortment Set (4) Each: 1-1/2", 2", 2-1/2", 3", 3-1/2" and 4"

TE-CO T-Slot Bolt Assortment Set (4) Each: 1-1/2", 2", 2-1/2", 3", 3-1/2" and 4"

  • Flushing, New York, United States
  • Jan 30th
Atlas # 9-88 MT # 2 Dead Center / OO 201

Atlas # 9-88 MT # 2 Dead Center / OO 201

  • Seffner, Florida, United States
  • Jan 30th
6 INCH HORIZONTAL/VERTICAL ROTARY TABLE TAIWANESE (3900-2316) - MADE IN TAIWAN

6 INCH HORIZONTAL/VERTICAL ROTARY TABLE TAIWANESE (3900-2316) - MADE IN TAIWAN

  • Chino, California, United States
  • Jan 30th
HAAS T5C2 Dual Spindle

HAAS T5C2 Dual Spindle

  • Chatsworth, California, United States
  • Jan 30th
Adjustable Tailstock For 4-6 Inch Rotary Tables

Adjustable Tailstock For 4-6 Inch Rotary Tables

  • Chino, California, United States
  • Jan 30th
Kurt DL600B Double Cnc Machinist Milling Machine Mill Vise

Kurt DL600B Double Cnc Machinist Milling Machine Mill Vise

  • United States
  • Jan 30th
Tool Maker Set 4

Tool Maker Set 4

  • Brooklyn, New York, United States
  • Jan 30th
DoAll Machinist Vice

DoAll Machinist Vice

  • Wilmington, North Carolina, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies