US $270
| Condition: |
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is
applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details.
...
|
Manufacturer | Milwaukee Electric Tool Corp. |
| Country/Region of Manufacture | United States | ||
| Model | Small Arbor, 3/8 in. Hex Shank Arbor | ||
| MPN | 49-56-7010 | ||
| Brand | Milwaukee |
Directions
Similar products from Adapters & Arbor Tool Holders
PAIR OF MORSE TAPER MT2 & MT3 TO R8 SLEEVE ADAPTERS
NEW! JACOBS 2MT MORSE TAPER TO 33JT JACOBS TAPER CHUCK ARBOR ADAPTER - SV
NEW! JACOBS 3MT MORSE TAPER TO 33JT JACOBS TAPER CHUCK ARBOR ADAPTER - SV
LENOX -6L HOLE SAW ARBOR 3/8" HEX SHANK FOR 20L - 96L 1-1/4" - 6" SAWS USA
Metabo 635115000 No. 2 B16 Taper Arbor
#2 MORSE TAPER 14 DRILL DRIVER COLLIS #7371
#2 MORSE TAPER #29 DRILL DRIVER SCULLY-JONES #7365
#2 MORSE TAPER 9.9 MM DRILL DRIVER COLLIS #7383
#2 MORSE TAPER 1/8 PIPE TAP LONG SHANK DRIVER #7378
#2 MORSE TAPER 10.9 MM DRILL DRIVER COLLIS #7370
Kobalt Spindle Adaptor New! Grinder
49-56-7000 Milwaukee Hole Saw Arbor
USED BEAVER QUICK CHANGE BORING BAR TOOL BIT HOLDER with 2.00"-SHANK
USED BEAVER QUICK CHANGE 2"-SHANK BORING BAR TOOL BIT HOLDER (For 1/2" bits)
USED BEAVER QUICK CHANGE 2"-SHANK BORING BAR TOOL BIT HOLDER (For 3/8" bits)
USED BEAVER No.14 QUICK CHANGE 2"-SHANK x 1" STUB MILLING ARBOR
(2) 300DA Collet Tool Holders, 1/2" Shank, (4) assorted collets
(2) Kennametal DA100 Collet Tool Holder, SS100DA104731, SS100TCK719, asst collet
TSD Universal Eng Acura Tap Holder, 1" Shank (4) 1/2" series AT Collets floating
(2) Erickson 200DA Collet Tool Holders, SS075DA204712, 3/4" Shank, (9) collets
People who viewed this item also vieved
JACOB'S TORQ-MATE TOOL ~ NEW ~ #30365
NIKKEN CAT 40 FACE MILL ADAPTER 1-1/4" ARBOR 1-3/4" PROJECTION STK 6960
1 PH HORN BORING BAR.5/8" SHANK.RBU223.0625.1.42 . MADE IN GERMANY,2 INSERT
VINTAGE USED CARBOLOY TEE-LOCK TURNING TOOL HOLDER TROON 23-2 VERY GOOD COND
Kennametal 1" 1.00 SHANK DCLNR-164C INSERT 2S02 NI5 LATHE TURNING TOOL HOLDER
Kaiser Thinbit 5/8" Left Hand Small Bit LATHE TURNING TOOL HOLDER INSERT 0.6250
Gates 3535 3 1/4" Taper Lock Bushing Type VT
DODGE - Taper-Lock Bushing #117221 3535 x 2-3/8 KW
KENNAMETAL BT40 7/8" END MILL HOLDER 3-1/2" PROJECTION STK 6793
Command/Urma B4U4-0003 BT 40 Boring Head Holder
Used 13/16” Hollow Cutter No Markings PRD2213
Kennametal DSSNR-12 4B Tool Holder
1/2 33JT UNIVERSAL DRILL CHUCK
#1 TO #2 MORSE TAPER SLEEVES HARDENED TANG
Royal Products Easy-Change Quick-Change 3/4" EC Type EM End Mill Holder (2)
PHASE II BXA SERIES LATHE QUICK CHANGE TOOL POST SET STK 5111
SUNNEN AN STYLE PORTABLE HONE WITH STONES
Sunnen Honing Mandrel 3G P20 906UC (LOC1101B)
18.5kw 25HP 300hz VFD inverter frequency converter 3ph 380VAC to 3ph 0-380V 37A
15kw 20HP 300hz VFD inverter frequency converter 3ph 380VAC to 3ph 0-380V 32A
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Accept All Cookies