New - Notifier Fsp-851 Intelligent Plug-in Photoelectric Smoke Detector - 432288

US $390

Whitestone, New York, United States
Jun 2nd

Open on mobile:
QR code

Notifier 851 Series intelligent plug-in smoke detectors with integral communication provide features that surpass conven- tional detectors. Detector sensitivity can be programmed in the control panel software. Sensitivity is continuously moni- tored and reported to the panel. Point ID capability allows each detector’s address to be set with decade address switches, providing exact detector location for selective main- tenance when chamber contamination reaches an unaccept- able level. The FSP-851 photoelectric detector’s unique optical sensing chamber is engineered to sense smoke pro- duced by a wide range of combustion sources. Dual electronic thermistors add 135°F (57°C) fixed-temperature thermal sens- ing on the FSP-851T. FSP-851 and FSP-851T detectors are compatible with all Notifier intelligent Fire Alarm Control Pan- els (FACP). FlashScan® (U.S. Patent 5,539,389) is a communication pro- tocol developed by Notifier engineering that greatly enhances the speed of communication between analog intelligent devices. Intelligent devices communicate in a grouped fash- ion. If one of the devices in the group has new information, the panel’s CPU stops the group poll and concentrates on single points. The net effect is response speed greater than five times that of earlier designs. Features • Sleek, low-profile design. • Addressable-analog communication. • Stable communication technique with noise immunity. • Low standby current. • Two-wire SLC connection. • FlashScan (NFS-640, NFS-3030) and classic CLIP sys- tems (AFP-100, AFP-200, AFP-300, AFP-400, NFS-640, AM2020/AFP1010, NFS-3030) compatible. • Rotary, decimal addressing (1-99 on current classic sys- tems, 1-159 on FlashScan systems). • Optional remote, single-gang LED accessory (RA400Z). • Dual LED design provides 360° viewing angle. • Visible bi-color LEDs blink green every time the detector is addressed, and illuminate steady red on alarm. • Remote test feature from the panel. • Walk test with address display (an address on 121 will blink the detector LED: 12-[pause]-1(FlashScan systems only). • Built-in functional test switch activated by external magnet. • Built-in tamper-resistant feature. • Sealed against back pressure. • Constructed of off-white Bayblend®, designed to commer- cial standards, and offers an attractive appearance. • 94-5V plastic flammability rating. • SEMS screws for wiring of the separate base. • Optional relay, isolator, and sounder bases. • Backward compatible.