+ Post new Ad
NEW Relton 1/2" Rebar Cutter Shank & 7/8" Cutter Head Combo STDS-2-12 + RB-14HO, US $24.99 – Picture 0
NEW Relton 1/2" Rebar Cutter Shank & 7/8" Cutter Head Combo STDS-2-12 + RB-14HO, US $24.99 – Picture 1
NEW Relton 1/2" Rebar Cutter Shank & 7/8" Cutter Head Combo STDS-2-12 + RB-14HO, US $24.99 – Picture 2
NEW Relton 1/2" Rebar Cutter Shank & 7/8" Cutter Head Combo STDS-2-12 + RB-14HO, US $24.99 – Picture 3
NEW Relton 1/2" Rebar Cutter Shank & 7/8" Cutter Head Combo STDS-2-12 + RB-14HO, US $24.99 – Picture 4
NEW Relton 1/2" Rebar Cutter Shank & 7/8" Cutter Head Combo STDS-2-12 + RB-14HO, US $24.99 – Picture 0
NEW Relton 1/2" Rebar Cutter Shank & 7/8" Cutter Head Combo STDS-2-12 + RB-14HO, US $24.99 – Picture 1
NEW Relton 1/2" Rebar Cutter Shank & 7/8" Cutter Head Combo STDS-2-12 + RB-14HO, US $24.99 – Picture 2
NEW Relton 1/2" Rebar Cutter Shank & 7/8" Cutter Head Combo STDS-2-12 + RB-14HO, US $24.99 – Picture 3
NEW Relton 1/2" Rebar Cutter Shank & 7/8" Cutter Head Combo STDS-2-12 + RB-14HO, US $24.99 – Picture 4

New Relton 1/2" Rebar Cutter Shank & 7/8" Cutter Head Combo Stds-2-12 + Rb-14ho

US $24.99

  • Salt Lake City, Utah, United States
  • Jan 30th
Open on mobile:
QR code
SLCHITECHGADGETS Relton 1/2" Rebar Cutter   Shank and 7/8" Cutter Head Combo   STDS-2-12 + RB-14HO Description: At last, the answer to drilling through concrete-embedded rebar! No more broken or shattered  hammer bits; now you can drill through the rebar and not have to relocate the hole to avoid the rebar! 1. When rebar is encountered while drilling with a rotary hammer and a carbide hammer bit, immediately stop the hammer and remove the bit from the hole (failure to stop will severely damage a cabide hammer bit)  2. Mount this rotary rebar cutter in a SDS 1/2" drill motor or SDS 1/2" hammer drill (with the selector in the rotary-only position); insert the rotary rebar cutter into the hole and drill through the embedded rebar. 3. Remove the rotary rebar cutter after the rebar has been drilled completely through and finish drilling the hole with the rotary hammer and hammer bit. (Note: The label has some bin wear) If you want the advantages of Relton quality, you can get it here for far less than the $14.75 (shank) + $86.00 (cutter bit) $100 total dealer cost and have it shipped to your door!              QUALITY PRODUCTS AT BARGAIN PRICES!!
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Brand Relton
MPN STDS-2-12 & RB-14HO
Model SDS Rebar Cutter and shank

Directions

Similar products from Various Tool Bits

ER11 A type Wrench for Clamping Nut CNC Milling Lathe

ER11 A type Wrench for Clamping Nut CNC Milling Lathe

  • china, China
  • Jan 30th
(5)Countersink Bits Machinist Gunsmith Toolmaker Milling Tool- FORD, CLEVELAND

(5)Countersink Bits Machinist Gunsmith Toolmaker Milling Tool- FORD, CLEVELAND

  • Kalamazoo, Michigan, United States
  • Jan 30th
10x Titanium Coated Carbide PCB Engraving CNC Bit Router Tool 10 Degree 0.1mm

10x Titanium Coated Carbide PCB Engraving CNC Bit Router Tool 10 Degree 0.1mm

  • shenzhen, China
  • Jan 30th
10X/Set 0.3mm to 1.2 mm PCB Print Circuit Board Carbide Micro Drill Bits Tool

10X/Set 0.3mm to 1.2 mm PCB Print Circuit Board Carbide Micro Drill Bits Tool

  • HK, Hong Kong
  • Jan 30th
NOS Somma Grooving Tool Lathe Parting Cut Off Blade 3/16" Thick, 11/16" Tall

NOS Somma Grooving Tool Lathe Parting Cut Off Blade 3/16" Thick, 11/16" Tall

  • Farmington, Michigan, United States
  • Jan 30th
6" NOS Acme Grooving Tool Lathe Parting Cut Off Blade 3/16" Thick, 0.85 Tall

6" NOS Acme Grooving Tool Lathe Parting Cut Off Blade 3/16" Thick, 0.85 Tall

  • Farmington, Michigan, United States
  • Jan 30th
Used CLEVELAND TWIST MO MAX 1/2" X 4" OAL COBALT USA 1294 & REXAA 1/8'' X 3''

Used CLEVELAND TWIST MO MAX 1/2" X 4" OAL COBALT USA 1294 & REXAA 1/8'' X 3''

  • Athens, Georgia, United States
  • Jan 30th
Milwaukee 11/16" One Piece Steel Hawg Cutter 49-57-8068 Brand New

Milwaukee 11/16" One Piece Steel Hawg Cutter 49-57-8068 Brand New

  • Haleyville, Alabama, United States
  • Jan 30th
Lot 50 small metal working drill tool bits machine work

Lot 50 small metal working drill tool bits machine work

  • Topeka, Kansas, United States
  • Jan 30th
Paslode 16 GA. Cordless Straight Finish Nailer W/ Battery & Case

Paslode 16 GA. Cordless Straight Finish Nailer W/ Battery & Case

  • Flint, Michigan, United States
  • Jan 30th
Pan American Cobalt Piloted Aircraft Jobber Drill Bit #30 x #40 ..... (5-3-4)

Pan American Cobalt Piloted Aircraft Jobber Drill Bit #30 x #40 ..... (5-3-4)

  • San Antonio, Texas, United States
  • Jan 30th
Tungsten Carbide Burr - Cylindrical Radius End - 3/16" dia QTY=10

Tungsten Carbide Burr - Cylindrical Radius End - 3/16" dia QTY=10

  • Collegeville, Pennsylvania, United States
  • Jan 30th
Tungsten Carbide Burr - Flame Shape - 1/4" dia QTY=3

Tungsten Carbide Burr - Flame Shape - 1/4" dia QTY=3

  • Collegeville, Pennsylvania, United States
  • Jan 30th
Tungsten Carbide Burr - Cylindrical Shape - 1/4" dia QTY=4

Tungsten Carbide Burr - Cylindrical Shape - 1/4" dia QTY=4

  • Collegeville, Pennsylvania, United States
  • Jan 30th
Superbee BC4821564C375 Cocave Radius Carbide Cutter

Superbee BC4821564C375 Cocave Radius Carbide Cutter

  • Millstone Township, New Jersey, United States
  • Jan 30th
NEW Central Machinery 5 Piece Mini Lathe Set Item 39931 Free Shipping

NEW Central Machinery 5 Piece Mini Lathe Set Item 39931 Free Shipping

  • Crestwood, Kentucky, United States
  • Jan 30th
2 Superbee 11/16 1 Fl 30 deg BE4411548A15 Cutting Tools

2 Superbee 11/16 1 Fl 30 deg BE4411548A15 Cutting Tools

  • Millstone Township, New Jersey, United States
  • Jan 30th
9/16" Carbide Rivet Shaver Bit 1/4-28 Thread - American Made .......... (1-3-2)

9/16" Carbide Rivet Shaver Bit 1/4-28 Thread - American Made .......... (1-3-2)

  • San Antonio, Texas, United States
  • Jan 30th
Champion XL200-2-5/16 RotoBrute

Champion XL200-2-5/16 RotoBrute

  • Lake Wales, Florida, United States
  • Jan 30th
Champion XL200-2-1/16 RotoBrute

Champion XL200-2-1/16 RotoBrute

  • Lake Wales, Florida, United States
  • Jan 30th

People who viewed this item also vieved

10 NEW SANDVIK CARBIDE INSERTS LEHW 18 04 16R-2

10 NEW SANDVIK CARBIDE INSERTS LEHW 18 04 16R-2

  • Wadley, Alabama, United States
  • Jan 30th
-- BIG DEAL -- SANDVIK N151.2-500-40-4G 235 10pcs

-- BIG DEAL -- SANDVIK N151.2-500-40-4G 235 10pcs

  • Beograd, Serbia
  • Jan 30th
MITSUBISHI Miracle Ball End Mills VF-2SB R1.5x6 VF2SBR0150S06 Qty 10 <640>

MITSUBISHI Miracle Ball End Mills VF-2SB R1.5x6 VF2SBR0150S06 Qty 10 <640>

  • Saint Louis, Missouri, United States
  • Jan 30th
TITAN Carbide Sq End Mill 3/32&#034; 4FL 1/8&#034; x 3/16&#034; x 1-1/2&#034; TC10606 Qty 3 [1930]

TITAN Carbide Sq End Mill 3/32" 4FL 1/8" x 3/16" x 1-1/2" TC10606 Qty 3 [1930]

  • Saint Louis, Missouri, United States
  • Jan 30th
BRAND NEW INTERCHANGABLE COUNTERBORE , 15/32&#034; DIAMETER WITH ( 2 ) 1/4&#034; PILOT

BRAND NEW INTERCHANGABLE COUNTERBORE , 15/32" DIAMETER WITH ( 2 ) 1/4" PILOT

  • Port Richey, Florida, United States
  • Jan 30th
BRAND NEW INTERCHANGABLE COUNTERBORE , 11/32&#034; DIAMETER WITH 1/4&#034; PILOT , UNION

BRAND NEW INTERCHANGABLE COUNTERBORE , 11/32" DIAMETER WITH 1/4" PILOT , UNION

  • Port Richey, Florida, United States
  • Jan 30th
1 Union Screw Machine Reamer .545&#034;-6 Flute-Right Hand-3&#034; OAL

1 Union Screw Machine Reamer .545"-6 Flute-Right Hand-3" OAL

  • Winona, Missouri, United States
  • Jan 30th
ATM 1/4 HS REAMER STRAIGHT 6 FLUTE USA

ATM 1/4 HS REAMER STRAIGHT 6 FLUTE USA

  • East Haven, Connecticut, United States
  • Jan 30th
NICE LOT OF 7 HSS PIPE &amp; REG DIES 1/8&#034; -27 NPT TO 3/8&#034; -16 WITH WRENCH MORSE

NICE LOT OF 7 HSS PIPE & REG DIES 1/8" -27 NPT TO 3/8" -16 WITH WRENCH MORSE

  • Ellington, New York, United States
  • Feb 14th
LOT OF 8 HSS DIES 1/8&#034; -27 TO 3/4&#034; -16 UNF WITH WRENCH WIDELL POLAND

LOT OF 8 HSS DIES 1/8" -27 TO 3/4" -16 UNF WITH WRENCH WIDELL POLAND

  • Ellington, New York, United States
  • Feb 14th
ONE SANDVIK MILFORD #TT 44 #3856-20-0.8-H-3 30 M TT-3/4X3-H 100 FT #48261

ONE SANDVIK MILFORD #TT 44 #3856-20-0.8-H-3 30 M TT-3/4X3-H 100 FT #48261

  • Springfield, New Hampshire, United States
  • Mar 4th
USED HYD-MECH FULLY AUTOMATIC DUAL POST BANDSAW HYDMECH H-10A GREAT CONDITION

USED HYD-MECH FULLY AUTOMATIC DUAL POST BANDSAW HYDMECH H-10A GREAT CONDITION

  • Warren, Michigan, United States
  • Mar 4th
Indexable Inserts SPG-633 Titon 60

Indexable Inserts SPG-633 Titon 60

  • San Antonio, Texas, United States
  • Apr 24th
Greenleaf ceramic parting/grooving tool Wg-4187-T2A wg300

Greenleaf ceramic parting/grooving tool Wg-4187-T2A wg300

  • Houston, Texas, United States
  • Apr 24th
Dumont #70 Metric Keyway Broach Set

Dumont #70 Metric Keyway Broach Set

  • Matawan, New Jersey, United States
  • May 24th
Tru-Cut AN.5622 9/16 x 2 cobalt Annular Cutter

Tru-Cut AN.5622 9/16 x 2 cobalt Annular Cutter

  • Hadley, Pennsylvania, United States
  • May 24th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies