+ Post new Ad
New Swiss 1.0" Shank ER16 Pull Out Tap Holder, US $940 – Picture 0
New Swiss 1.0" Shank ER16 Pull Out Tap Holder, US $940 – Picture 0

New Swiss 1.0" Shank Er16 Pull Out Tap Holder

US $940

  • Kent, Washington, United States
  • Jun 9th
Open on mobile:
QR code
New 1.0" Shank ER16 Pull Out Tap Holder. This Tap holder has many advantages. The tap holder will fit in all of the tooling bars with a 1.00" bore. The holder is kept from rotating by a pin from the top. It can float back and forth smoothly. A spring keeps the holder back against the tooling bar. If you program the feed of the tap a little lower than the lead, the assembly will pull out a little from the bar. Then, when the spindle reverses, the tap just "floats." For small, sensitive taps, this is better than a holder with a clutch that can snap the tap on the reversal. The holder is case hardened. It will last a long time. The holder uses standard ER16 collets. Special tapping collets with a square broach in the back are available . The holder takes no additional space on the tooling bar. It is much smaller than self releasing holders. The tap holder will fit in all tooling bars with 1.000" bore.

Directions

Similar products from Screw Machines Equipment

9/16 D2 Grand Geometric Style Die Head

9/16 D2 Grand Geometric Style Die Head

  • Las Vegas, Nevada, United States
  • Jun 9th
Geometric 5/16 D #10-24 LH Chasers

Geometric 5/16 D #10-24 LH Chasers

  • Las Vegas, Nevada, United States
  • Jun 9th
Geometric 9/16 D 7/16-20 LH Chasers

Geometric 9/16 D 7/16-20 LH Chasers

  • Las Vegas, Nevada, United States
  • Jun 9th
Geometric 9/16 D 9/16-18 Chasers

Geometric 9/16 D 9/16-18 Chasers

  • Las Vegas, Nevada, United States
  • Jun 9th
Geometric 9/16 D 9/16-20 Chasers

Geometric 9/16 D 9/16-20 Chasers

  • Las Vegas, Nevada, United States
  • Jun 9th
Geometric 9/16 D 3/8-24 Chasers

Geometric 9/16 D 3/8-24 Chasers

  • Las Vegas, Nevada, United States
  • Jun 9th
Geometric 1" D 1/4 .905-14 NS Left Hand Chasers

Geometric 1" D 1/4 .905-14 NS Left Hand Chasers

  • Las Vegas, Nevada, United States
  • Jun 9th
Geometric 3/4 D1/4 1/2-12 NS Left Hand Chasers

Geometric 3/4 D1/4 1/2-12 NS Left Hand Chasers

  • Las Vegas, Nevada, United States
  • Jun 9th
Geometric 3/4 D 3/8-16 1/2 LD Spec Chasers

Geometric 3/4 D 3/8-16 1/2 LD Spec Chasers

  • Las Vegas, Nevada, United States
  • Jun 9th
New 12-28 PROJECTION Supermetric Geometric Chasers for 5/16 Head

New 12-28 PROJECTION Supermetric Geometric Chasers for 5/16 Head

  • Leland, Illinois, United States
  • Jun 9th
PTC 5-24-2003 Electrical Holder

PTC 5-24-2003 Electrical Holder

  • Levittown, Pennsylvania, United States
  • Jun 9th
Brown & Sharpe Tap Holder 711-1067-122

Brown & Sharpe Tap Holder 711-1067-122

  • Iron River, Michigan, United States
  • Jun 9th
Brown & Sharpe Tangent Tool Holder 711-1037-100

Brown & Sharpe Tangent Tool Holder 711-1037-100

  • Iron River, Michigan, United States
  • Jun 9th
Brown & Sharpe Tool Holder 711-1037-122

Brown & Sharpe Tool Holder 711-1037-122

  • Iron River, Michigan, United States
  • Jun 9th
Brown & Sharpe Tool Holder 711-1036-122

Brown & Sharpe Tool Holder 711-1036-122

  • Iron River, Michigan, United States
  • Jun 9th
Geometric 9/16 D 1/2-20 LH Chasers

Geometric 9/16 D 1/2-20 LH Chasers

  • Las Vegas, Nevada, United States
  • Jun 9th
Geometric Greenfield 9/16 K 5/16-18 NF Chasers

Geometric Greenfield 9/16 K 5/16-18 NF Chasers

  • Las Vegas, Nevada, United States
  • Jun 9th
Geometric 5/16 D 4.0 MM Chasers

Geometric 5/16 D 4.0 MM Chasers

  • Las Vegas, Nevada, United States
  • Jun 9th
Geometric 1/2 DSA 3/8-16 Chasers

Geometric 1/2 DSA 3/8-16 Chasers

  • Las Vegas, Nevada, United States
  • Jun 9th
Geometric Greenfield 9/16 K 5/16-24 Chasers

Geometric Greenfield 9/16 K 5/16-24 Chasers

  • Las Vegas, Nevada, United States
  • Jun 9th

People who viewed this item also vieved

High Quality M4 x 0.70 D4 6" Extra Long HSS Plug Pulley Tap 4MM 4FL Extended

High Quality M4 x 0.70 D4 6" Extra Long HSS Plug Pulley Tap 4MM 4FL Extended

  • Denver, Colorado, United States
  • Jan 30th
High Quality M5 x 0.80 D4 6" Extra Long HSS Plug Pulley Tap 5MM 4FL Extended

High Quality M5 x 0.80 D4 6" Extra Long HSS Plug Pulley Tap 5MM 4FL Extended

  • Denver, Colorado, United States
  • Jan 30th
High Quality M10 x 1.5 D6 6" Extra Long HSS Plug Pulley Tap 10MM 4FL Extended

High Quality M10 x 1.5 D6 6" Extra Long HSS Plug Pulley Tap 10MM 4FL Extended

  • Denver, Colorado, United States
  • Jan 30th
System 3R Rails and Stop

System 3R Rails and Stop

  • Manitowoc, Wisconsin, United States
  • Jan 30th
Mitsubishi .006 Diamond Wire Guides

Mitsubishi .006 Diamond Wire Guides

  • Manitowoc, Wisconsin, United States
  • Jan 30th
SYSTEM 3R EDM MOUNTING CHUCK W/CONTROLER

SYSTEM 3R EDM MOUNTING CHUCK W/CONTROLER

  • Chicago, Illinois, United States
  • Jan 30th
WACHS BITS

WACHS BITS

  • Salinas, California, United States
  • Jan 30th
HOSSFELD SWING ARM

HOSSFELD SWING ARM

  • Salinas, California, United States
  • Jan 30th
RIVET SQUEEZER SETS LOT 10 BUTTON HEAD & FLUSH VARIETY ALTERED!!

RIVET SQUEEZER SETS LOT 10 BUTTON HEAD & FLUSH VARIETY ALTERED!!

  • Haysville, Kansas, United States
  • Jan 30th
Sunnen - S-225 - Truing Sleeve - Good Used Condition -

Sunnen - S-225 - Truing Sleeve - Good Used Condition -

  • Lockport, Illinois, United States
  • Jan 30th
Machinist Swiss Pattern Files

Machinist Swiss Pattern Files

  • Kailua Kona, Hawaii, United States
  • Jan 30th
K.H. Huppert Co. Heat Treat Furnace Type ST, Style 12 FMHT

K.H. Huppert Co. Heat Treat Furnace Type ST, Style 12 FMHT

  • Marathon, New York, United States
  • Jan 30th
CINCINNATI MILACRON 18 X 1 X 5 12A80-K4-VFM. 73678-2KF. BRAND NEW WILL SHIP

CINCINNATI MILACRON 18 X 1 X 5 12A80-K4-VFM. 73678-2KF. BRAND NEW WILL SHIP

  • Sellersburg, Indiana, United States
  • Jan 30th
CINCINNATI MILACRON 12 X 1 X 3. 6624-J6-VS6. A48031-1QA BRAND NEW WILL SHIP

CINCINNATI MILACRON 12 X 1 X 3. 6624-J6-VS6. A48031-1QA BRAND NEW WILL SHIP

  • Sellersburg, Indiana, United States
  • Jan 30th
I.D.GRINDER QUILL SPINDLE ARBOR 1 15/32 OD X 5/8-18 MOUNT X 3 17/64 OAL #51733

I.D.GRINDER QUILL SPINDLE ARBOR 1 15/32 OD X 5/8-18 MOUNT X 3 17/64 OAL #51733

  • Resaca, Georgia, United States
  • Jan 30th
Gear Guard Bracket L5-95 12" Sears Craftsman Metal Lathe 101.07403- 2 3/4" Gap

Gear Guard Bracket L5-95 12" Sears Craftsman Metal Lathe 101.07403- 2 3/4" Gap

  • Troy, Michigan, United States
  • Jan 30th
Knob & Rod @ 14" Long from Vintage 12" Sears Craftsman Metal Lathe 101.07403

Knob & Rod @ 14" Long from Vintage 12" Sears Craftsman Metal Lathe 101.07403

  • Troy, Michigan, United States
  • Jan 30th
Lead Screw @ 40" Long from Vintage 12" Sears Craftsman Metal Lathe 101.07403

Lead Screw @ 40" Long from Vintage 12" Sears Craftsman Metal Lathe 101.07403

  • Troy, Michigan, United States
  • Jan 30th
Kennametal Fix Perfect 40A02RP90BG15CUPM for High Speed Machining

Kennametal Fix Perfect 40A02RP90BG15CUPM for High Speed Machining

  • Hendersonville, Tennessee, United States
  • Jan 30th
Kennametal SEFAS tool 3.37542 R020

Kennametal SEFAS tool 3.37542 R020

  • Hendersonville, Tennessee, United States
  • Jan 30th
HSK-A-63 PCD Tipped Milling Cutter, Mapal PT40A 11062

HSK-A-63 PCD Tipped Milling Cutter, Mapal PT40A 11062

  • Hendersonville, Tennessee, United States
  • Jan 30th
1.2mm Pitch 8mm(ID)*28mm(OD)*8mm(H) Wheel Knurling Linear Knurl Tool

1.2mm Pitch 8mm(ID)*28mm(OD)*8mm(H) Wheel Knurling Linear Knurl Tool

  • ???, ???, China
  • Jan 30th
Diagonal 1.0mm Pitch 8mm(ID)*28mm(OD)*8mm(H) Wheel Knurling Linear Knurl Tool

Diagonal 1.0mm Pitch 8mm(ID)*28mm(OD)*8mm(H) Wheel Knurling Linear Knurl Tool

  • ???, ???, China
  • Jan 30th
Sunnen 15RY 4500 Line Hone Mandrel/CH100

Sunnen 15RY 4500 Line Hone Mandrel/CH100

  • North Bend, Washington, United States
  • Jan 30th
Foley-Belsaw / Saw Blade Carriers / 6 Piece Set / Ratchet - Index Bars

Foley-Belsaw / Saw Blade Carriers / 6 Piece Set / Ratchet - Index Bars

  • Bozrah, Connecticut, United States
  • Jan 30th
Rockwell Delta Model 28-365 20" woodworking Band Saw

Rockwell Delta Model 28-365 20" woodworking Band Saw

  • Pine Grove, Pennsylvania, United States
  • Jan 30th
Victor 315 Medium Size Welding Torch Mixing Body

Victor 315 Medium Size Welding Torch Mixing Body

  • Salinas, California, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies