+ Post new Ad
Niagara Bar Folding Machine, US $300.00 – Picture 0
Niagara Bar Folding Machine, US $300.00 – Picture 1
Niagara Bar Folding Machine, US $300.00 – Picture 2
Niagara Bar Folding Machine, US $300.00 – Picture 3
Niagara Bar Folding Machine, US $300.00 – Picture 4
Niagara Bar Folding Machine, US $300.00 – Picture 5
Niagara Bar Folding Machine, US $300.00 – Picture 6
Niagara Bar Folding Machine, US $300.00 – Picture 7
Niagara Bar Folding Machine, US $300.00 – Picture 8
Niagara Bar Folding Machine, US $300.00 – Picture 0
Niagara Bar Folding Machine, US $300.00 – Picture 1
Niagara Bar Folding Machine, US $300.00 – Picture 2
Niagara Bar Folding Machine, US $300.00 – Picture 3
Niagara Bar Folding Machine, US $300.00 – Picture 4
Niagara Bar Folding Machine, US $300.00 – Picture 5
Niagara Bar Folding Machine, US $300.00 – Picture 6
Niagara Bar Folding Machine, US $300.00 – Picture 7
Niagara Bar Folding Machine, US $300.00 – Picture 8

Niagara Bar Folding Machine

US $300.00

  • Jasper, Indiana, United States
  • Jan 30th
Open on mobile:
QR code
 This Niagara bar folder is used but in good working order. There are scratches and some general wear. Overall dimensions are 39" wide x 11" deep (23" when the handle is included). Bending edge is straight. I did see one small nick in the edge but otherwise it seemed to be good. I've taken some close up pictures of the bending edge and can send those in an email if you request them. There is a 1" adjustable depth gauge. It's the red knob and gauge in the picture that shows the Niagara name. The bending edge is 30" long and will bend up to 22 gauge. It includes a copy of information on the operation of bar folding machines from a sheet metal worker's manual. Information taken directly from the sheet metal worker's manual: "Folding machines are used very extensively to facilitate the forming of locks or edges, as in preparing straight sheets of metal for receiving wire; also for turning flanges at various angles, and to prepare locks before grooving, in vessels, tanks, pipe, cans, and such work." 
Condition Used :
An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes “This bar folder is used but in good working order. There are scratches and some general wear.”

Directions

Similar products from Tools for Fabrication Equipment

70 Ton 19.69" Strk Muller-Weingarten CLZ 63.1.11 HYDRAULIC PRESS, Die Cushion /

70 Ton 19.69" Strk Muller-Weingarten CLZ 63.1.11 HYDRAULIC PRESS, Die Cushion /

  • Harrison, New Jersey, United States
  • Jan 30th
1.5" W 2" Strk Rapid Air A2 PRESS FEED

1.5" W 2" Strk Rapid Air A2 PRESS FEED

  • Harrison, New Jersey, United States
  • Jan 30th
275 Ton 161.4" Bed Amada RG-250 PRESS BRAKE, NC9EX-II CNC Back Gauge

275 Ton 161.4" Bed Amada RG-250 PRESS BRAKE, NC9EX-II CNC Back Gauge

  • Harrison, New Jersey, United States
  • Jan 30th
10" W 10" Strk Rapid Air J10 PRESS FEED

10" W 10" Strk Rapid Air J10 PRESS FEED

  • Harrison, New Jersey, United States
  • Jan 30th
0.125" Cap. 60" W Betenbender 5'-125 NEW SHEAR, Low Profile Hydraulic Shear, MAD

0.125" Cap. 60" W Betenbender 5'-125 NEW SHEAR, Low Profile Hydraulic Shear, MAD

  • Harrison, New Jersey, United States
  • Jan 30th
50 Ton 96" Bed Betenbender 8'-50 NEW PRESS BRAKE, Made in the USA

50 Ton 96" Bed Betenbender 8'-50 NEW PRESS BRAKE, Made in the USA

  • Harrison, New Jersey, United States
  • Jan 30th
1200Lb Cap. 18" W Cooper-Weymouth 1200-18P UNCOILER, ized

1200Lb Cap. 18" W Cooper-Weymouth 1200-18P UNCOILER, ized

  • Harrison, New Jersey, United States
  • Jan 30th
600Lb Cap. 10" W Littell 5G UNCOILER, ized

600Lb Cap. 10" W Littell 5G UNCOILER, ized

  • Harrison, New Jersey, United States
  • Jan 30th
1.5" W 4" Strk P/A Industries PRESS FEED

1.5" W 4" Strk P/A Industries PRESS FEED

  • Harrison, New Jersey, United States
  • Jan 30th
0.625" Dia. Diacro 2 BILLET SHEAR, MADE IN USA

0.625" Dia. Diacro 2 BILLET SHEAR, MADE IN USA

  • Harrison, New Jersey, United States
  • Jan 30th
HS Tooling,CXT-II ,19453,Hi-shear 1.5 Hp Handheld Pneumatic drill,Aviation Tool

HS Tooling,CXT-II ,19453,Hi-shear 1.5 Hp Handheld Pneumatic drill,Aviation Tool

  • Mesa, Arizona, United States
  • Jan 30th
PRESS BRAKE ANGLE FOR A PRESS BRAKE ~ 8'

PRESS BRAKE ANGLE FOR A PRESS BRAKE ~ 8'

  • Walnut Cove, North Carolina, United States
  • Jan 30th
Angle Drill Countersink Cage- Aircraft, Aviation Tools

Angle Drill Countersink Cage- Aircraft, Aviation Tools

  • Kernersville, North Carolina, United States
  • Jan 30th
Piranha P50 Punch Die Block (steel) for CP&D Fig 55 die - Piranha Ironworkers

Piranha P50 Punch Die Block (steel) for CP&D Fig 55 die - Piranha Ironworkers

  • Hutchinson, Kansas, United States
  • Jan 30th
Di - Acro Finger Break 24" - EXCELLENT CONDITION

Di - Acro Finger Break 24" - EXCELLENT CONDITION

  • Freehold, New Jersey, United States
  • Jan 30th
Parallel Gear Drive 4 Openings 3/4"

Parallel Gear Drive 4 Openings 3/4"

  • Oakboro, North Carolina, United States
  • Jan 30th
60 TON MINSTER GAP FRAME SINGLE CRANK PRESS

60 TON MINSTER GAP FRAME SINGLE CRANK PRESS

  • Mansfield, Ohio, United States
  • Jan 30th
Parallel Gear Drive 2 Openings 1"

Parallel Gear Drive 2 Openings 1"

  • Oakboro, North Carolina, United States
  • Jan 30th
LANDIS LANDMATIC 10F 1-1/4" THREAD CUTTING DIE HEAD W/GAUGE + CHASERS

LANDIS LANDMATIC 10F 1-1/4" THREAD CUTTING DIE HEAD W/GAUGE + CHASERS

  • Highland, New York, United States
  • Jan 30th
Parallel Gear Drive 2 Openings 3/4"

Parallel Gear Drive 2 Openings 3/4"

  • Oakboro, North Carolina, United States
  • Jan 30th

People who viewed this item also vieved

DORIAN TOOL POST + 4 DORIAN TOOL HOLDERS 1"SHANK AND 1" BORING BAR HOLDER

DORIAN TOOL POST + 4 DORIAN TOOL HOLDERS 1"SHANK AND 1" BORING BAR HOLDER

  • United States
  • Mar 8th
1998 ACE DESIGNERS MODEL LT-2 CNC LATHE FANUC OT CONTROL TAILSTOCK FULLY TOOLED

1998 ACE DESIGNERS MODEL LT-2 CNC LATHE FANUC OT CONTROL TAILSTOCK FULLY TOOLED

  • Long Beach, California, United States
  • Mar 8th
machinist tool,metal lathe tool post,south bend lathe

machinist tool,metal lathe tool post,south bend lathe

  • United States
  • Mar 8th
Deckel fp1/fp2/fp3 40 Taper MT1 Adapter

Deckel fp1/fp2/fp3 40 Taper MT1 Adapter

  • Salinas, California, United States
  • Mar 9th
Lot of HSS Milling Saw Cutter

Lot of HSS Milling Saw Cutter

  • Covina, California, United States
  • Mar 9th
LOT HEAVY DUTY HSS MILLING CUTTERS w/ 1/2" ARBOR HOLES

LOT HEAVY DUTY HSS MILLING CUTTERS w/ 1/2" ARBOR HOLES

  • Norwalk, California, United States
  • Mar 9th
GRINDING WHEEL BALANCING ARBOR

GRINDING WHEEL BALANCING ARBOR

  • Colorado Springs, Colorado, United States
  • May 6th
Oil Skimmer - OMI

Oil Skimmer - OMI

  • Keenesburg, Colorado, United States
  • May 7th
Angle Dresser for Surface Grinders, Tool & Cutter Grinders

Angle Dresser for Surface Grinders, Tool & Cutter Grinders

  • Harrisburg, Pennsylvania, United States
  • May 8th
Hanson VanWinkle VRV-2 Grinder Dust Collector - Pedestal Dual Shaft (1504-025)

Hanson VanWinkle VRV-2 Grinder Dust Collector - Pedestal Dual Shaft (1504-025)

  • North Tonawanda, New York, United States
  • May 14th
Brown & Sharpe OD/ID Grinder

Brown & Sharpe OD/ID Grinder

  • Pittsfield, Massachusetts, United States
  • May 15th
Myford-Center grinding tool

Myford-Center grinding tool

  • Windsor, Connecticut, United States
  • May 15th
Spade Drill Insert HSS TiN Coated 1" Series A HP 1021T-0100 (1pcs)

Spade Drill Insert HSS TiN Coated 1" Series A HP 1021T-0100 (1pcs)

  • Summit-Argo, Illinois, United States
  • Jun 5th
TAP HANDLE WRENCH 18 Inch

TAP HANDLE WRENCH 18 Inch

  • Mart, Texas, United States
  • Jun 6th
LARGE VINTAGE UNION TWIST DRILL HEAVY DUTY INDUSTRIAL RATCHET THREADING DIE

LARGE VINTAGE UNION TWIST DRILL HEAVY DUTY INDUSTRIAL RATCHET THREADING DIE

  • Deltona, Florida, United States
  • Jun 6th
HEM SAW H1200A HORIZONTAL BAND SAW 12.75" X 11"

HEM SAW H1200A HORIZONTAL BAND SAW 12.75" X 11"

  • Mount Pleasant, Texas, United States
  • May 26th
HEM SAW H101A HORIZONTAL BAND SAW 12.75" X 11"

HEM SAW H101A HORIZONTAL BAND SAW 12.75" X 11"

  • Mount Pleasant, Texas, United States
  • May 26th
Eisele Circular Cold Saw 2016 VMS-350 w/ 13" Blade, Head Swivels Quick Lock Vise

Eisele Circular Cold Saw 2016 VMS-350 w/ 13" Blade, Head Swivels Quick Lock Vise

  • Elk Grove Village, Illinois, United States
  • May 26th
SUNNEN STONES - V24A47 (1box)

SUNNEN STONES - V24A47 (1box)

  • Summit-Argo, Illinois, United States
  • May 26th
SUNNEN STONES - P20A57 (1box)

SUNNEN STONES - P20A57 (1box)

  • Summit-Argo, Illinois, United States
  • May 26th
SUNNEN STONES - M27A23 (1box)

SUNNEN STONES - M27A23 (1box)

  • Summit-Argo, Illinois, United States
  • May 26th
(20) EROWA Chucking Spigot F/A EDM M10 x 45 EDM TOOLING electrode holders cnc

(20) EROWA Chucking Spigot F/A EDM M10 x 45 EDM TOOLING electrode holders cnc

  • Hopkins, Minnesota, United States
  • May 27th
Tensitron Trigger Tension Meter TX-5EDM or TX-5000 for EDM WIre Machines

Tensitron Trigger Tension Meter TX-5EDM or TX-5000 for EDM WIre Machines

  • Menomonee Falls, Wisconsin, United States
  • May 27th
System 3R EDM Manual Chuck Adapter

System 3R EDM Manual Chuck Adapter

  • Millstone Township, New Jersey, United States
  • May 27th
4 Geometric 1" Die Chasers

4 Geometric 1" Die Chasers

  • Phoenix, Arizona, United States
  • May 29th
Boyar Schultz Adjustable Revolving Stock Stop

Boyar Schultz Adjustable Revolving Stock Stop

  • Dayton, Ohio, United States
  • May 29th
Brown & Sharpe 00 Ultramatic Backward Vertical Tool Holder

Brown & Sharpe 00 Ultramatic Backward Vertical Tool Holder

  • Dayton, Ohio, United States
  • May 29th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies