Nicem-Matic ModP-400 Vulcanizer Press ~ Makes Molds ~ Was Only Used 20hr, US $5,250.00 – Picture 0

Nicem-Matic ModP-400 Vulcanizer Press ~ Makes Molds ~ Was Only Used 20hr, US $5,250.00 – Picture 1

Nicem-Matic ModP-400 Vulcanizer Press ~ Makes Molds ~ Was Only Used 20hr, US $5,250.00 – Picture 2

Nicem-Matic ModP-400 Vulcanizer Press ~ Makes Molds ~ Was Only Used 20hr, US $5,250.00 – Picture 3

Nicem-Matic ModP-400 Vulcanizer Press ~ Makes Molds ~ Was Only Used 20hr, US $5,250.00 – Picture 4

Nicem-Matic ModP-400 Vulcanizer Press ~ Makes Molds ~ Was Only Used 20hr, US $5,250.00 – Picture 5

Nicem-Matic ModP-400 Vulcanizer Press ~ Makes Molds ~ Was Only Used 20hr, US $5,250.00 – Picture 6

Nicem-Matic ModP-400 Vulcanizer Press ~ Makes Molds ~ Was Only Used 20hr, US $5,250.00 – Picture 7

Nicem-Matic ModP-400 Vulcanizer Press ~ Makes Molds ~ Was Only Used 20hr, US $5,250.00 – Picture 8

Nicem-Matic ModP-400 Vulcanizer Press ~ Makes Molds ~ Was Only Used 20hr, US $5,250.00 – Picture 9

Nicem-Matic ModP-400 Vulcanizer Press ~ Makes Molds ~ Was Only Used 20hr, US $5,250.00 – Picture 10

Nicem-Matic ModP-400 Vulcanizer Press ~ Makes Molds ~ Was Only Used 20hr, US $5,250.00 – Picture 11

Nicem-matic Modp-400 Vulcanizer Press ~ Makes Molds ~ Was Only Used 20hr

US $5,250.00

El Paso, Texas, United States
Jan 30th

Open on mobile:
QR code

Nicem P400 Matic Vulcanizer Press ~ Makes Molds ~ was only used 20hr I am selling a used Nicem P400 Matic that I had stored away. This Vulcanizer was used to make a few handfuls of samples, for a new product that ended up getting canceled so it did not get used but about 20 hr. after that it was stored away as you can see from the picture it still looks bran new. It has some very light stains, but other then that this machine is in immaculate condition. I am also including a binder of the original line card / brochure from the company that sold us the Vulcanizer, it’s composed of 25 pages that illustrate the P400 as well as the different machines and supplies they sold, and I am also including a real big bones that you will not find anywhere else which is the Instruction Manual for the P400 Matic – Vulcanizing Press it’s composed of 45 pages, this manual was translated from Italian to English by two of my coworkers and the company that sold us the Vulcanizer, so I believe no one else has it. I included some picture of some of the pages, which show one of two pages of the table of contents another picture shows the electrical wiring diagram and yet another with more wiring, and there is quite a few other diagram and procedures on how to operate, maintain, and repair the Vulcanizer. I will need to empty out the hydraulic oil before shipping the Instruction Manual specifies the type of hydraulic oil you will need. Technical Specifications: Total Power………………….…5.1 kW Voltage ………………………....220/380 three-phase Frequency……………………....50/60 Hz Heating plates surface………...400mm x 400mm (16” x 16”) Opening between the plates….200mm (8”) Max. closing force……………..25000 kg 27.5 (tons) 55,000 lbs. Max. mold diameter……………...400mm (16”) Max. working pressure………..240 bar (3481) psi Dimensions……………………..700 x 865 x 1156h Weight…………………………...432 kg (952.4) lb. AUTOMATIC VULCANIZING PRESS Manufactured by NICEM, The PMATIC press is the worlds most technologically advanced vulcanizing press. The main advantage is that the press maintains the set pressure throughout the vulcanizing cycle. This feature assures a perfectly even mold every time. Features Automatic vulcanization press with plates, insulated head for energy savings. Complete Hydraulic group: pump, locking valve, maximum pressure valve, hydraulic cylinder. Automatic regulation of pressure during work cycle. Digital pyrometer to control temperature, set up for separate regulation of upper and lower heating plates. Item included in action 1. Nicem P400 Matic Vulcanizer Press 2. 25 page binder of the original line card / brochure 3. 45 pages Instruction Manual for the P400 Matic – Vulcanizing Press Shipping: The vulcanizing press is currently in a residential neighborhood in El Paso, Texas, but I do have a lift to help load on to the back of a pickup or low trailer. There are a few different freight companies close by that I could take the vulcanizing press to their dock at no cost as long as you use one of them two miles away. I will need to have it re-skidded wrapped and strapped, but I think the best thing would be to have it crated. All shipping cost will be covered by the buyer as well as making all the freight arrangements. skidded I can have it re-skidded wrapped and strapped for $125. Weight would be about 1100 LB skidded Dimensions 36" x 40" x 55" crated I can have it crated for $235 Weight would be about 1300 LB Dimensions 36" x 40" x 57" Please contact me with any questions: If you should have any questions or concerns about this item, please contact me before placing a bid. Call Richard at (915) 630-2112 or email me at rgarcia1@elp.rr.com I will be glad to work with you. This is a good opportunity get a AUTOMATIC VULCANIZING PRESS that is in excellent condition so good luck!

Condition	Used : An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes	“Was only used 20hr!”