+ Post new Ad
Nider Gear Head Drill, NI-64L, 8 Speeds, MT#1 Spindle 18" x 10" Table 12" Throat, US $849.00 – Picture 0
Nider Gear Head Drill, NI-64L, 8 Speeds, MT#1 Spindle 18" x 10" Table 12" Throat, US $849.00 – Picture 0

Nider Gear Head Drill, Ni-64l, 8 Speeds, Mt#1 Spindle 18" X 10" Table 12" Throat

US $849.00

  • Hopkins, Minnesota, United States
  • Mar 3rd
Open on mobile:
QR code
This is a nice unit that was removed working from an Metalworking plant near Milwaukee.  We brought it to Minneapolis, to clean and refurbish the unit.  It was being used at the time we purchased it.  Tested and working.  Nice unit ready for a new home. Nider Gear Head Drill Type No: NI-64L Serial No: 6825109 18" x 10-1/2" Table With Coolant Channel 12" Throat 26" Max Table to Spindle 12" x 13-1/2" T-Slotted Base MT#1 Taper Spindle 8 Spindle Speeds: High/Low 1300, 680, 390, 200 / 650, 340, 195, 100 RPM 2-Speed Motor: 440V, 3-Phase, 1.1/0.8 HP, 3350/1720 RPM Table and Head Adjustment 4" Head Adjustment (Note: Locking Lever is missing) (Note: Quill Spring has been modified) Includes: Jacobs 3A Chuck, 1/8" - 5/8" Capacity

Directions

Similar products from Tools for Drilling & Tapping Equipment

PARLEC NUMERTAP 700 QUICK CHANGE HOLDER S12-77TA5 1-1/4" SHANK + TAP ADAPTERS

PARLEC NUMERTAP 700 QUICK CHANGE HOLDER S12-77TA5 1-1/4" SHANK + TAP ADAPTERS

  • Ellington, New York, United States
  • Mar 4th
1/2" Diameter 90° Degree 1 Flute Solid Carbide Countersink Ultra-Tool USA

1/2" Diameter 90° Degree 1 Flute Solid Carbide Countersink Ultra-Tool USA

  • Mantua, Ohio, United States
  • Mar 4th
3/8"" Diameter 82° Degree 1 Flute Solid Carbide Countersink Ultra-Tool USA

3/8"" Diameter 82° Degree 1 Flute Solid Carbide Countersink Ultra-Tool USA

  • Mantua, Ohio, United States
  • Mar 4th
VERMONT TWO PIECE ADJUSTABLE DIE & SCREW PLATES SET - EXCELLENT

VERMONT TWO PIECE ADJUSTABLE DIE & SCREW PLATES SET - EXCELLENT

  • Pittsburgh, Pennsylvania, United States
  • Mar 4th
CLEAN!! TAPMATIC 90X SELF-REVERSING TORQUE CONTROL TAPPING ATTACHMENT / HEAD

CLEAN!! TAPMATIC 90X SELF-REVERSING TORQUE CONTROL TAPPING ATTACHMENT / HEAD

  • Covina, California, United States
  • Mar 4th
JARVIS .25" - 20 H5 TAPS .25" SHANK 2.5" OAL QTY9 (LOC1117A) TS13

JARVIS .25" - 20 H5 TAPS .25" SHANK 2.5" OAL QTY9 (LOC1117A) TS13

  • Laingsburg, Michigan, United States
  • Mar 3rd
THREADWELL .5" 13 NC TAPS GH 3 HS .5" SHANK 10" OAL QTY1 (LOC1063B) TS13

THREADWELL .5" 13 NC TAPS GH 3 HS .5" SHANK 10" OAL QTY1 (LOC1063B) TS13

  • Laingsburg, Michigan, United States
  • Mar 3rd
VERMONT 3/4 10 NC TAPS GH 5 HSS QTY3 (LOC1193A) TS13

VERMONT 3/4 10 NC TAPS GH 5 HSS QTY3 (LOC1193A) TS13

  • Laingsburg, Michigan, United States
  • Mar 3rd
VERMONT 3/8" 18 NPTF HS G TAP DRYSEAL QTY1 (LOC1117A) TS13

VERMONT 3/8" 18 NPTF HS G TAP DRYSEAL QTY1 (LOC1117A) TS13

  • Laingsburg, Michigan, United States
  • Mar 3rd
VERMONT 5/8" 11 H5 TAP X 10 4F EXT TAP QTY1 (LOC1117A) TS13

VERMONT 5/8" 11 H5 TAP X 10 4F EXT TAP QTY1 (LOC1117A) TS13

  • Laingsburg, Michigan, United States
  • Mar 3rd
(4) Gang Drill (2) Solberga Gear Head Drills SE1735, 23" x 79" Table, Coolant

(4) Gang Drill (2) Solberga Gear Head Drills SE1735, 23" x 79" Table, Coolant

  • Hopkins, Minnesota, United States
  • Mar 3rd
DELTA DRILL PRESS

DELTA DRILL PRESS

  • Hilton Head Island, South Carolina, United States
  • Mar 3rd
Recoil (HeliCoil Type) Tread Repair Kit Size M8-1.25 Part # 35080

Recoil (HeliCoil Type) Tread Repair Kit Size M8-1.25 Part # 35080

  • Nashville, Tennessee, United States
  • Mar 3rd
HELICOIL Thread Repair Kit (All 8) 5401-04, 5403-4, 5403-6, 5402-4, 5403-5 MORE

HELICOIL Thread Repair Kit (All 8) 5401-04, 5403-4, 5403-6, 5402-4, 5403-5 MORE

  • Nashville, Tennessee, United States
  • Mar 3rd
Servo Products High Precision Mini Drill Press Model 7000 (RPM 200-20,000)

Servo Products High Precision Mini Drill Press Model 7000 (RPM 200-20,000)

  • San Jose, California, United States
  • Mar 3rd
2 UNIVERSAL ACURA-FLEX MAX-FLOAT TAPPING CHUCKS w/ 3/4" SHANKS - #169

2 UNIVERSAL ACURA-FLEX MAX-FLOAT TAPPING CHUCKS w/ 3/4" SHANKS - #169

  • Covina, California, United States
  • Mar 3rd
Mueller B-1 Drilling/Tapping Machine

Mueller B-1 Drilling/Tapping Machine

  • Toms River, New Jersey, United States
  • Mar 3rd
2 MORSE TAPER x #6 JACOBS No. A0206 CHUCK drill lathe mill tool Chuck

2 MORSE TAPER x #6 JACOBS No. A0206 CHUCK drill lathe mill tool Chuck

  • Mountain View, Missouri, United States
  • Mar 3rd
STARRETT 91A T HANDLE TAP WRENCH

STARRETT 91A T HANDLE TAP WRENCH

  • Erie, Pennsylvania, United States
  • Mar 3rd
JACOBS BALL BEARING SUPER CHUCK 14N 3 JT 0 - 1/2 IN WITH CAT 40 (30345)

JACOBS BALL BEARING SUPER CHUCK 14N 3 JT 0 - 1/2 IN WITH CAT 40 (30345)

  • Cincinnati, Ohio, United States
  • Mar 3rd

People who viewed this item also vieved

BROWN & SHARPE 29/64" ROUND #22 FEED FINGER 0108159

BROWN & SHARPE 29/64" ROUND #22 FEED FINGER 0108159

  • Fox Lake, Illinois, United States
  • Jan 30th
BROWN & SHARPE 11/16" ROUND #22 FEED FINGER 0108157

BROWN & SHARPE 11/16" ROUND #22 FEED FINGER 0108157

  • Fox Lake, Illinois, United States
  • Jan 30th
BROWN & SHARPE 1" ROUND #22 FEED FINGER 0108151

BROWN & SHARPE 1" ROUND #22 FEED FINGER 0108151

  • Fox Lake, Illinois, United States
  • Jan 30th
65 Ton 9.75" Thrt Edwards 65 Ton *Made in the USA* NEW IRONWORKER, 5 station; 24

65 Ton 9.75" Thrt Edwards 65 Ton *Made in the USA* NEW IRONWORKER, 5 station; 24

  • Harrison, New Jersey, United States
  • Jan 30th
75 Ton 10" Thrt Edwards 75 Ton *Made in the USA* NEW IRONWORKER, Dedicated Coper

75 Ton 10" Thrt Edwards 75 Ton *Made in the USA* NEW IRONWORKER, Dedicated Coper

  • Harrison, New Jersey, United States
  • Jan 30th
100 Ton 11" Thrt Edwards 100 Ton Deluxe *Made in the USA* NEW IRONWORKER, Built-

100 Ton 11" Thrt Edwards 100 Ton Deluxe *Made in the USA* NEW IRONWORKER, Built-

  • Harrison, New Jersey, United States
  • Jan 30th
Sunnen Hone Mandrel 2G-P28-1250WB

Sunnen Hone Mandrel 2G-P28-1250WB

  • Johnson City, New York, United States
  • Jan 30th
3M 435N Coated Silicon Carbide Sanding Sheet - 180 Grit 9 in Width x 11

3M 435N Coated Silicon Carbide Sanding Sheet - 180 Grit 9 in Width x 11

  • Jamaica, New York, United States
  • Jan 30th
New 370A Air pencil grinding tool High speed 70000RPM and high precision 0.01mm

New 370A Air pencil grinding tool High speed 70000RPM and high precision 0.01mm

  • hongkong, Hong Kong
  • Jan 30th
3M 00048011645117 Scotch-Brite(TM) Hookit(TM) Clean and Finish Disc, Hook

3M 00048011645117 Scotch-Brite(TM) Hookit(TM) Clean and Finish Disc, Hook

  • Richmond Hill, New York, United States
  • Jan 30th
3M NX PSA Paper D/F Disc Roll, Aluminum Oxide, 6 Holes, 6" Diameter, P240 Grit

3M NX PSA Paper D/F Disc Roll, Aluminum Oxide, 6 Holes, 6" Diameter, P240 Grit

  • Richmond Hill, New York, United States
  • Jan 30th
3M 88132 Hookit Disc Hand Pad , Hook and Loop, 5" Diameter, 1/4" Thick, Black

3M 88132 Hookit Disc Hand Pad , Hook and Loop, 5" Diameter, 1/4" Thick, Black

  • Richmond Hill, New York, United States
  • Jan 30th
ORIGINAL SOUTH BEND 9" LATHE APRON PINION GEAR MODEL A 10K?

ORIGINAL SOUTH BEND 9" LATHE APRON PINION GEAR MODEL A 10K?

  • Tremont, Illinois, United States
  • Jan 30th
W.M. ZIEGLER USA TURRET LATHE FLOATING TOOL HOLDER 1 1/2" shank x 1 1/2" hole

W.M. ZIEGLER USA TURRET LATHE FLOATING TOOL HOLDER 1 1/2" shank x 1 1/2" hole

  • Milroy, Indiana, United States
  • Jan 30th
Rockford 24" Hydraulic metal shaper

Rockford 24" Hydraulic metal shaper

  • Gering, Nebraska, United States
  • Jan 30th
Sowa 45 Deg 4" Max Mill Face Mill MM 45 4300FM

Sowa 45 Deg 4" Max Mill Face Mill MM 45 4300FM

  • Flint, Michigan, United States
  • Jan 30th
Sandvik Coromant 4-7/8" Indexable Insert Face Mill RA262.2-125M 1-1/2" Pilot

Sandvik Coromant 4-7/8" Indexable Insert Face Mill RA262.2-125M 1-1/2" Pilot

  • Flint, Michigan, United States
  • Jan 30th
Sandvik Coromant 4" Indexable Insert Face Mill RA262.2-100M 1-1/2" Dia Pilot 5/8

Sandvik Coromant 4" Indexable Insert Face Mill RA262.2-100M 1-1/2" Dia Pilot 5/8

  • Flint, Michigan, United States
  • Jan 30th
ELECTRA ELECTRONIC CONTROLLER FOR SCREWDRIVER WITH CABLE CR-PS

ELECTRA ELECTRONIC CONTROLLER FOR SCREWDRIVER WITH CABLE CR-PS

  • Cedarburg, Wisconsin, United States
  • Jan 30th
Aircraft Rivet Flush Set, 1 1/4 ” Diameter Head, 2 5/8” OAL, .401 Shank.

Aircraft Rivet Flush Set, 1 1/4 ” Diameter Head, 2 5/8” OAL, .401 Shank.

  • Tucson, Arizona, United States
  • Jan 30th
Aircraft Rivet Flush Set, 1 1/4 ” Diameter Head, 3 1/2 ” OAL, .401 Shank, Used/Surplus.

Aircraft Rivet Flush Set, 1 1/4 ” Diameter Head, 3 1/2 ” OAL, .401 Shank, Used/Surplus.

  • Tucson, Arizona, United States
  • Jan 30th
System 3R EDM 52mm Holder, 20mm Shank Tooling

System 3R EDM 52mm Holder, 20mm Shank Tooling

  • Lake Zurich, Illinois, United States
  • Feb 16th
System 3R EDM 70mm Macro Holder, With Mounting Plate

System 3R EDM 70mm Macro Holder, With Mounting Plate

  • Lake Zurich, Illinois, United States
  • Feb 16th
System 3R EDM 70mm Macro Holder

System 3R EDM 70mm Macro Holder

  • Lake Zurich, Illinois, United States
  • Feb 16th
Kalamazoo Horizontal Band Saw 9AW

Kalamazoo Horizontal Band Saw 9AW

  • Lee's Summit, Missouri, United States
  • Mar 3rd
NEW TANNEWITZ JAW SET GUIDE R-84 R-84 A R84 R84A

NEW TANNEWITZ JAW SET GUIDE R-84 R-84 A R84 R84A

  • Clover, South Carolina, United States
  • Mar 3rd
9”x 12” Wells Horizontal Band Saw Machine Specs, Very Nice

9”x 12” Wells Horizontal Band Saw Machine Specs, Very Nice

  • Somerville, New Jersey, United States
  • Mar 4th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies