Norton Charger Free Cut Chop Saw Reinforced Abrasive Cut-off Wheel, Type 01 F...

US $8.65

Summerville, South Carolina, United States
Jan 30th

Open on mobile:
QR code

Norton Charger Free Cut Chop Saw Reinforced Abrasive Cut-off Wheel, Type 01 Flat, Zirconia Alumina and Aluminum Oxide, 1" Arbor, 16" Diameter x 7/64" Thickness (Pack of 1) Norton Charger Free Cut Type 01 wheels are used on chop saws for larger cross-sections, like solid bar stock and angle iron, and on hard-to-cut materials like nickel and titanium alloys. The side reinforcement reduces breakage and helps provide straight cuts. Reinforced cutoff wheels are designed to resist breakage caused by severe cross-bending and are required on any operation where the work is not securely clamped. Resin bonds are organic bonds that soften under the heat of grinding, releasing dulled abrasive grains. Because of its forgiving nature, only an organic type bond is used in cutoff wheels. The resin-bonded wheel is more resilient than a vitrified wheel. The manufacturing term for a resin bond wheel is "cured," meaning the wheel has been heated to less than 500 degrees F. Straight (also called flat) wheels are the most common grinding wheel shape. Flat wheels are used for grinding on the periphery, or outside boundary edge, of the wheel and produce a slightly concave surface, called hollow ground, on the workpiece. These wheels can be used for cutting off, tool grinding (between centers or centerless), and removing mold marks and sand from castings, among others. They are frequently used with grinding machines. Using a harder grade wheel increases wheel life but also increases burn and requires more power, and decreases cut rate. Burn is the effect on a workpiece from thermal stress as abrasive cuts or rubs material away. The damage ranges from discoloration to cracking of the workpiece. Zirconia alumina is a self-sharpening abrasive that allows for a faster cut rate and longer life than aluminum oxide, due to its ability to fracture and refracture, creating new cutting edges. Zirconia alumina is often used for high stock removal on wood and metals. Aluminum oxide is a widely used and versatile abrasive material. It is a tough, fracture- and wear-resistant grit that works well with a broad range of materials, from metals to wood. Aluminum oxide is more durable than silicon carbide and often used for material removal and finishing. Abrasives are used for a variety of applications from shaping a part to fine finishing, depending on the grit size. Low grit numbers like 40 are coarse and are used for removing excess material and shaping a part. High grit numbers like 400 are fine and help to create a smooth surface finish. Norton Abrasives manufactures a wide variety of sanding, grinding, and polishing abrasives, and has been located in the United States since 1885. In 1990, Saint-Gobain purchased Norton, keeping its manufacturing facilities and offices in the same location. Norton/Saint-Gobain has been recognized as a Global 100 Sustainable Company, as well as earning ISO 9000 and 14001 certification for quality and environmental management standards. Zirconia alumina and aluminum oxide for up to twice the life of aluminum oxide wheels Type 01 wheels are straight (also called flat) cut-off wheels, and are used for peripheral grinding Free Cut wheels use a more flexible binder than the Long Life wheel, for faster cutting on low-horsepower chop saws Reinforced design helps provide safety, strength, and straight cuts Resin bonds soften under the heat of grinding, releasing dulled abrasive grains Product Specifications Part Number 66253410196 Grit Type N/A UPC 662534101969 Arbor Hole Diameter 1 inches EAN 0662534101969 Fastening Type Round Hole Max Rotational Speed 3820 RPM Number of Items 1 Outside Diameter 16 inches Size Name 16 inches Thickness 7/64 inches Call us at 1-843-261-9553 / 1-800-961-2124 or contact us via eBay with any questions.