Odorcide 210 Odorcide 210 is a safe, economical and most importantly effective deodorizing product. Odorcide is a complex blend of safe, biodegradable ingredients that work through several actions. Those actions include chemical bonding, physical absorbtion and counteraction. These actions lead to one result, the complete elimination of odors. Odorcide also contains inhibitors that will control odors caused by further organic decomposition and residuals that continue to combat odors long after application. Odorcide 210 is available in the concentrated form in gallon, half gallon and 16oz sizes. The Ready-to-Use product is available in a 32oz spray and a 16oz carpet soaker. General Cleaning For use in conjunction with pre-sprays or other chemicals: Simply add Odorcide at the dilution rate of 1 to 256 (1/2oz Odorcide per gallon with water or usual cleaning/sanitizing solution). Perform your cleaning process and Odorcide will deodorize as you clean. For serious issues, such as pet urine odors: Dilute Odorcide at the dilution rate of 1 to 16 (8oz Odorcide per gallon with water or usual cleaning/sanitizing solution). Identify the source of the odor and saturate the area ensuring that Odorcide penetrates to the source of the odor. For use as a final application after cleaning: Simply add Odorcide at the dilution rate of 1 to 256 (1/2oz Odorcide per gallon with water) in a trigger spray bottle. Keep in mind that Odorcide is available in a 32oz Ready to Use trigger spray bottle which is perfect for this application. Spray Odorcide directly onto the carpet after your cleaning and walk away. Pet Odors For serious issues, such as pet urine odors: Locate the source of the odor. Noting the surface stain in generally sufficient however using a black light or moisture detection device can be useful. A good rule of thumb is that urine migrates laterally about 50% beyond the stain area, as well as penetrating deeply beneath the carpet surface. Mix Odorcide 210 Concentrate with water at the rate of 1 to 16 (8oz. per gallon). After testing for colorfastness, apply sufficient mix to cover the contaminated area and to penetrate as deeply as the odor source. For faster absorbtion, this process works best on dry surfaces. Pressure Spray at 40 to 100 PSI, Inject or Pour on. To assure penetration, use a roller or simply walk the product in. Excess product can be extracted once you are confident Odorcide has reached the odor source. If any odor remains, Odorcide did not reach the odor source Flood Remediation For flood issues, such as mold/mildew odors: Locate the source of the odor. For mold odors, the mold is generally visible and should be delt with directly with Odorcide and a fungicide. Mix Odorcide 210 Concentrate with water or disinfectant/fungicide at the rate of 1 to 16 (8oz. per gallon). After testing for colorfastness where necessary, apply sufficient mix to cover the contaminated area and to penetrate as deeply as the odor source. For faster absorbtion, this process works best on dry surfaces. For bare hard surfaces, spray bottles or pump sprayers are fine. For carpeted surfaces, Pressure Spray at 40 to 100 PSI, Inject or Pour on. To assure penetration, use a roller or simply walk the product in. Excess product can be extracted once you are confident Odorcide has reached the odor source. If any odor remains, Odorcide did not reach the odor source Smoke Odors For use directly on fabric or hard surfaces: Indentify the source of the odor. Dilute Odorcide at the rate of 1 to 64 with water (2oz per gallon). After testing for color fastness where needed, spray the mixture directly on walls, fabrics, etc. Apply sufficient product to cover the entire contaminated area and to penetrate as deeply as the odor source. This process will work best on dry surfaces. If the surface is heavily contaminated with smoke odor, use a dilution of 1 to 32 with water (4oz per gallon) to ensure success. For use with a fogging device: Dilute Odorcide at the dilution rate of 1 to 32 with water (4oz per gallon). If you are using a non-handheld device, place the fogging device in the center of the area being treated and apply liberally. ULV foggers are recommended for use with Odorcide General Janitorial Use For general janitorial use: Add Odorcide at the dilution rate of 1 to 256 (1/2oz Odorcide per gallon with water or usual cleaning/sanitizing solution). Perform your cleaning process and Odorcide will deodorize as you clean. If the area is heavily contaminated, use a 1 to 16 dilution for the first application and thereafter revert to the 1 to 256 dilution. Due to the residual action of Odorcide, once the odor has been controlled it is usually unnecessary to use the product with every cleaning. Odorcide will reactivate when it gets wet and will continue to stop odors. For use as a final application after cleaning: Add Odorcide at the dilution rate of 1 to 256 (1/2oz Odorcide per gallon with water or usual cleaning/sanitizing solution) in a trigger spray bottle. Keep in mind that Odorcide is available in a 32oz Ready to Use trigger spray bottle which is perfect for this application. Spray Odorcide directly onto the surface (around the base of toilets or urinals) after your cleaning and let air dry Medical Facilities For general medical janitorial use: Add Odorcide at the dilution rate of 1 to 256 (1/2oz Odorcide per gallon with water or usual cleaning/sanitizing solution). Perform your cleaning process and Odorcide will deodorize as you clean. If the area is heavily contaminated, use a 1 to 16 dilution for the first application and thereafter revert to the 1 to 256 dilution. Due to the residual action of Odorcide, once the odor has been controlled it is usually unnecessary to use the product with every cleaning. Odorcide will reactivate when it gets wet and will continue to stop odors. For use as a final application after cleaning: Add Odorcide at the dilution rate of 1 to 256 (1/2oz Odorcide per gallon with water or usual cleaning/sanitizing solution) in a trigger spray bottle. Keep in mind that Odorcide is available in a 32oz Ready to Use trigger spray bottle which is perfect for this application. Spray Odorcide directly onto the surface (around the base of toilets or urinals) after your cleaning and walk away. Laundry Applications For pre-laundry soak: Add Odorcide at the dilution rate of 1 to 256 (1/2oz per gallon with water or usual cleaning/sanitizing solution). After testing for colorfastness, soak contaminated materials in the mixture for a short time and then wash as usual. For use in standard washing machines: Add Odorcide at the dilution rate of 1/2oz Odorcide per load of laundry. This should be applied in the pre-soak cycle of the machine. Odorcide can be used in conjunction with other product with the exception of bleach. If you are cleaning clothing that requires bleach and you would like to use Odorcide to deodorize, please refer to the pre-soak area above
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
