+ Post new Ad
Okamoto ACC-6.18 DX3, OMA-450UDXA, 3 axis automatic surface grinders, lot of (2), US $3700 – Picture 0
Okamoto ACC-6.18 DX3, OMA-450UDXA, 3 axis automatic surface grinders, lot of (2), US $3700 – Picture 0

Okamoto Acc-6.18 Dx3, Oma-450udxa, 3 Axis Automatic Surface Grinders, Lot Of (2)

US $3700

  • Oxford, Pennsylvania, United States
  • Jun 4th
Open on mobile:
QR code
Here is a lot of (2) Okamoto surface grinders with automatic controls.  They are not functional. I put power to them.  Nothing on the first one turns on with any of the buttons.  There is a red light on the controller designated Alarm #47 ALM-HNS.  There are no error codes on the display.  I can manually engage the contactor for the spindle and the hydraulic pump.  They both then turn on. The spindle is loud coming mostly from the rear motor bearing.  The spindle bearings feel smooth at the grinding wheel end when turning by hand.  The table hydraulics and spindle work on the second machine.  I don't know how to operate the cross or incremental down feed so they may or may not work.  There are no alarms or error codes on the controller or panel display.  The transformer is missing on the second machine.  Both are currently wired 240 3-phase.  The machines are not identical, but very close.  The serial numbers are 45192 and 45018.  Payment to be check or wire transfer. Buyer to arrange shipping.  I will load on an open truck. ********** STANDARD EBAY POLICY All sales are final and are AS-IS with no warranty. I try to represent the condition the best that I can. If you have questions, email me direct at warren9@zoominternet.net or call 610-932-4019. All transactions are governed by the laws in place in Lewisville, PA. ********************* ***************Sales tax is charged for PA sales unless exempt ****************

Directions

Similar products from Toold for Grinding Machines

DESMOND NO. 1 WHEEL DRESSER CUTTER - HEAVY DUTY VINTAGE

DESMOND NO. 1 WHEEL DRESSER CUTTER - HEAVY DUTY VINTAGE

  • Lacolle, Quebec, Canada
  • Jun 4th
Swing / Tilt Grinding Wheel Dresser

Swing / Tilt Grinding Wheel Dresser

  • Waterbury, Connecticut, United States
  • Jun 4th
Vintage Southington Grinding Wheel Dressing Tool / Metalworking tool

Vintage Southington Grinding Wheel Dressing Tool / Metalworking tool

  • Lenhartsville, Pennsylvania, United States
  • Jun 4th
Jotes 12" x 48" surface Grinder

Jotes 12" x 48" surface Grinder

  • Greenville, Mississippi, United States
  • Jun 4th
3M Roloc Fibre Disc 983C TR, Ceramic Grain, 2" Diameter, 36 Grit (Pack of 50), N

3M Roloc Fibre Disc 983C TR, Ceramic Grain, 2" Diameter, 36 Grit (Pack of 50), N

  • Franklin, Tennessee, United States
  • Jun 4th
3/4 x 12" abrasive sanding belts for Darex Work Sharp Knife Sharpener Ken Onion

3/4 x 12" abrasive sanding belts for Darex Work Sharp Knife Sharpener Ken Onion

  • guangzhou guangdong, China
  • Jun 4th
4" Diameter 70 DuroBelt Grinder RUBBER Wheel for 2x72" knife making grinder

4" Diameter 70 DuroBelt Grinder RUBBER Wheel for 2x72" knife making grinder

  • guangzhou guangdong, China
  • Jun 4th
Belt Grinder 2x72 wheel set for knife grinders with steel d-plate 5/8"

Belt Grinder 2x72 wheel set for knife grinders with steel d-plate 5/8"

  • guangzhou guangdong, China
  • Jun 4th
Dumore 12 010 Lathe tool post grinder 1 H.P. 3PH MOTOR SEE DESCRIPTION 4 SHIPPIN

Dumore 12 010 Lathe tool post grinder 1 H.P. 3PH MOTOR SEE DESCRIPTION 4 SHIPPIN

  • Red Creek, New York, United States
  • Jun 4th
LION GRINDING WHEELS LTD. BROCKVILLE ONTARIO, USAGE & SETTING UP, 1952

LION GRINDING WHEELS LTD. BROCKVILLE ONTARIO, USAGE & SETTING UP, 1952

  • Shelburne, Ontario, Canada
  • Jun 4th
GRINDING SPINDLE 2-3/4" DIA, 9-1/2" LONG

GRINDING SPINDLE 2-3/4" DIA, 9-1/2" LONG

  • Holland, Ohio, United States
  • Jun 4th
Reid Surface Grinder

Reid Surface Grinder

  • Oregon, Ohio, United States
  • Jun 4th
Grinding Fixture for H & G Cleveland Chasers 100 Series Loc: P 1-3

Grinding Fixture for H & G Cleveland Chasers 100 Series Loc: P 1-3

  • Oregon, Ohio, United States
  • Jun 4th
DUMORE No. 5 Tool Post Grinder 1/2 HP Mod 8010-210 Loc: H 1

DUMORE No. 5 Tool Post Grinder 1/2 HP Mod 8010-210 Loc: H 1

  • Oregon, Ohio, United States
  • Jun 4th
DIAMOND DRESSERS NORTON 7/16" DIA & 5/15 DIA.-CLUSTER & SINGLE POINT LOT OF 4

DIAMOND DRESSERS NORTON 7/16" DIA & 5/15 DIA.-CLUSTER & SINGLE POINT LOT OF 4

  • Howell, Michigan, United States
  • Jun 4th
Wilton #152 110 Volt 6"x1/2" Arbor Dual Wheel Grinder 1/3 HP 3450 RPM New in Box

Wilton #152 110 Volt 6"x1/2" Arbor Dual Wheel Grinder 1/3 HP 3450 RPM New in Box

  • Elmwood Park, Illinois, United States
  • Jun 4th
2 VINTAGE GRINDING/DRESSING TOOLS & EXTRA WHEELS DESMOND & DUNLAP

2 VINTAGE GRINDING/DRESSING TOOLS & EXTRA WHEELS DESMOND & DUNLAP

  • Pine Grove, Pennsylvania, United States
  • Jun 4th
GRINDING WHEEL DRESSER / DRESSING TOOL

GRINDING WHEEL DRESSER / DRESSING TOOL

  • Houston, Texas, United States
  • Jun 4th
MACHINIST PARALLEL BARS

MACHINIST PARALLEL BARS

  • Lompoc, California, United States
  • Jun 4th
DIAMOND DRESSER FIXTURE Diamond dresser for Surface Grinder cylindrical girders

DIAMOND DRESSER FIXTURE Diamond dresser for Surface Grinder cylindrical girders

  • Brick, New Jersey, United States
  • Jun 4th

People who viewed this item also vieved

H&G STYLE 1/4"-20 CHASERS, 100 SERIES, 10 HOOK, 20 CHAMFER

H&G STYLE 1/4"-20 CHASERS, 100 SERIES, 10 HOOK, 20 CHAMFER

  • Fox Lake, Illinois, United States
  • Jan 30th
H&G STYLE 5-40 CHASERS, 100 SERIES, 2 SETS

H&G STYLE 5-40 CHASERS, 100 SERIES, 2 SETS

  • Fox Lake, Illinois, United States
  • Jan 30th
H&G STYLE 9/32"-36 CHASERS, 100 SERIES, 3 SETS

H&G STYLE 9/32"-36 CHASERS, 100 SERIES, 3 SETS

  • Fox Lake, Illinois, United States
  • Jan 30th
PTD 21.5MM HS COOLANT THRU DRILL 21.5MM SHANK 5.5" LOC 10" OAL (LOC1106A) TS12

PTD 21.5MM HS COOLANT THRU DRILL 21.5MM SHANK 5.5" LOC 10" OAL (LOC1106A) TS12

  • Laingsburg, Michigan, United States
  • Jan 30th
PTD 13.5MM HS DRILL 13.5MM SHANK 3.5" LOC 7.5" OAL (LOC1106A) TS12

PTD 13.5MM HS DRILL 13.5MM SHANK 3.5" LOC 7.5" OAL (LOC1106A) TS12

  • Laingsburg, Michigan, United States
  • Jan 30th
PTD 13.5MM HS DRILL 13.5MM SHANK 4.5" LOC 8.5" OAL (LOC1174A) TS12

PTD 13.5MM HS DRILL 13.5MM SHANK 4.5" LOC 8.5" OAL (LOC1174A) TS12

  • Laingsburg, Michigan, United States
  • Jan 30th
JAPAX EDM FLUSH CUP MGS OEM#1121-1 LU3B LOWER 1PC .235"

JAPAX EDM FLUSH CUP MGS OEM#1121-1 LU3B LOWER 1PC .235"

  • Mundelein, Illinois, United States
  • Jan 30th
JAPAX EDM FLUSH CUPS MGS OEM#1121 LU3B LOWER W/ORING

JAPAX EDM FLUSH CUPS MGS OEM#1121 LU3B LOWER W/ORING

  • Mundelein, Illinois, United States
  • Jan 30th
JAPAX EDM FLUSH CUPS MGS OEM#0106 TWO PIECE UP

JAPAX EDM FLUSH CUPS MGS OEM#0106 TWO PIECE UP

  • Mundelein, Illinois, United States
  • Jan 30th
1.1875" Dia GMC PRB-30HV NEW PIPE BENDERS, RING & ANGLE ROLL BENDER w/UNIVERSAL

1.1875" Dia GMC PRB-30HV NEW PIPE BENDERS, RING & ANGLE ROLL BENDER w/UNIVERSAL

  • Harrison, New Jersey, United States
  • Jan 30th
2" Dia GMC PRB-55 NEW PIPE BENDERS, RING & ANGLE ROLL BENDER w/UNIVERSAL ROLLS

2" Dia GMC PRB-55 NEW PIPE BENDERS, RING & ANGLE ROLL BENDER w/UNIVERSAL ROLLS

  • Harrison, New Jersey, United States
  • Jan 30th
16GA GAUGE 52" W GMC SBR-5216 SHEAR, BRAKE, ROLLS, MANUAL 3 IN 1 MACHINE

16GA GAUGE 52" W GMC SBR-5216 SHEAR, BRAKE, ROLLS, MANUAL 3 IN 1 MACHINE

  • Harrison, New Jersey, United States
  • Jan 30th
Steel 1/8" Coil Anode Basket (AB2132)

Steel 1/8" Coil Anode Basket (AB2132)

  • Sparta, Michigan, United States
  • Jan 30th
12" Diameter x 24"L Poly Platiing Barrel (B2046)

12" Diameter x 24"L Poly Platiing Barrel (B2046)

  • United States
  • Jan 30th
12" Diameter x 24"L Poly Plating Barrel (B2045)

12" Diameter x 24"L Poly Plating Barrel (B2045)

  • United States
  • Jan 30th
6" Craftsman109 Atlas Metal lathe tool post holder lantern post holder

6" Craftsman109 Atlas Metal lathe tool post holder lantern post holder

  • Boulder Junction, Wisconsin, United States
  • Jan 30th
SNAP TAP INDEXABLE THREADING LATHE TOOL HOLDER 1" SHANK MODEL CER 100 6-27Q

SNAP TAP INDEXABLE THREADING LATHE TOOL HOLDER 1" SHANK MODEL CER 100 6-27Q

  • Jamestown, New York, United States
  • Jan 30th
MACHINIST TOOLS LATHE MILL Lot of Misc. Machinist Cutters an holders

MACHINIST TOOLS LATHE MILL Lot of Misc. Machinist Cutters an holders

  • Lake Villa, Illinois, United States
  • Jan 30th
2-UNION, USA, CORNER ROUND SIDE MILLING CUTTERS - 3 X .157 X 1, 18 TEETH

2-UNION, USA, CORNER ROUND SIDE MILLING CUTTERS - 3 X .157 X 1, 18 TEETH

  • McKee, Kentucky, United States
  • Jan 30th
NIAGARA - STRAIGHT SIDE MILLING CUTTER - 5 X 3/4 X 1, USA-26 TEETH.

NIAGARA - STRAIGHT SIDE MILLING CUTTER - 5 X 3/4 X 1, USA-26 TEETH.

  • McKee, Kentucky, United States
  • Jan 30th
NIAGARA CUTTER - USA - STRAIGHT SIDE MILLING CUTTER -26 TEETH, 5 X 3/4 X 1

NIAGARA CUTTER - USA - STRAIGHT SIDE MILLING CUTTER -26 TEETH, 5 X 3/4 X 1

  • McKee, Kentucky, United States
  • Jan 30th
LOC-LINE #21194 1/4" IN-LINE VALVE 2PC PACK

LOC-LINE #21194 1/4" IN-LINE VALVE 2PC PACK

  • Hobart, Indiana, United States
  • Jan 30th
Malco Large Hex Driver HHD2 new 10-1/2 inches long 5/16

Malco Large Hex Driver HHD2 new 10-1/2 inches long 5/16

  • Abbotsford, British Columbia, Canada
  • Jan 30th
DCM RM2038 Belt Sander 20HP/Sunnen/Kwik Way/ 15x127 Belt

DCM RM2038 Belt Sander 20HP/Sunnen/Kwik Way/ 15x127 Belt

  • North Bend, Washington, United States
  • Jan 30th
Saw Guide Bearing Assembly

Saw Guide Bearing Assembly

  • Baton Rouge, Louisiana, United States
  • Jan 30th
Upper and Lower Saw Guide Assebly

Upper and Lower Saw Guide Assebly

  • Baton Rouge, Louisiana, United States
  • Jan 30th
Oblique Upper and Lower Saw Guide Assebly

Oblique Upper and Lower Saw Guide Assebly

  • Baton Rouge, Louisiana, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies