+ Post new Ad
Okuma MX 45VAE CNC Vertical Machining Center, US $26,500.00 – Picture 0
Okuma MX 45VAE CNC Vertical Machining Center, US $26,500.00 – Picture 1
Okuma MX 45VAE CNC Vertical Machining Center, US $26,500.00 – Picture 2
Okuma MX 45VAE CNC Vertical Machining Center, US $26,500.00 – Picture 3
Okuma MX 45VAE CNC Vertical Machining Center, US $26,500.00 – Picture 4
Okuma MX 45VAE CNC Vertical Machining Center, US $26,500.00 – Picture 5
Okuma MX 45VAE CNC Vertical Machining Center, US $26,500.00 – Picture 0
Okuma MX 45VAE CNC Vertical Machining Center, US $26,500.00 – Picture 1
Okuma MX 45VAE CNC Vertical Machining Center, US $26,500.00 – Picture 2
Okuma MX 45VAE CNC Vertical Machining Center, US $26,500.00 – Picture 3
Okuma MX 45VAE CNC Vertical Machining Center, US $26,500.00 – Picture 4
Okuma MX 45VAE CNC Vertical Machining Center, US $26,500.00 – Picture 5

Okuma Mx 45vae Cnc Vertical Machining Center

US $26,500.00

  • Minneapolis, Minnesota, United States
  • Jan 30th
Open on mobile:
QR code
Okuma MX 45VAE CNC Vertical Machining Center Manufacturer: Okuma Model#: MX 45VAE Age: 1998 Specification: Machine Control OSP 700M Table Size 40" x 20" Machine Travels (X/Y/Z) 30" x 18.11 x 17.72" Table Capacity 500 Lbs. Spindle Taper Cat 40 Spindle Speeds 7000 RPM Transmission Direct Drive Rapid Traverse Rate (X/Y/Z) 1181, 1181, 944 IPM Maximum Cutting Feed Rate .39 IPM Tool Changer Style Side mount Twin Arm Tool Changer Capacity 32 Max Tool Length 9.84" Max Tool weight 17.6 lbs Power Requirement 220 Volt 3 Phase Equipped With: OSP 700M Control, 7,000 RPm Spindle, 32 Station Twin arm Automatic Tool Changer, Cat 40 Spindle Taper, Air Blast, Lift Up Chip Conveyer, Coolant Tank w/ Chip Wash, Remote Jog Handle, Control Manuals, Maintenance Manuals, Parts Manual, Opertor Manuals, Schematics. Electrics:220 Volt 3 Phase Approximate Machine Dimensions: 92"L x 98"W x 102"H Approximate Weight: 13000 lbs. Location: Plymouth, MN THIS ITEM IS OWNED BY AND LOCATED AT MACHINESUSED.COM - CONTACT US TO DISCUSS THE MACHINE AND TO ARRANGE INSPECTION OR PURCHASE AT 763-745-1166 OR EMAIL US
Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...
Brand Okuma
Model MX 45VAE

Directions

Similar products from Tools for Milling Machines

MAPAL Fine Boring Tool Pattern Tool 30073457

MAPAL Fine Boring Tool Pattern Tool 30073457

  • Vassar, Michigan, United States
  • Jan 30th
MACHINE CENTERS TG100 COLLET CHUCK W/ NMTB 40 SHANK

MACHINE CENTERS TG100 COLLET CHUCK W/ NMTB 40 SHANK

  • Chino, California, United States
  • Jan 30th
1" HEAVY DUTY ITALIAN MADE END MILL ENDMILL HOLDER W/ NMTB40 QUICK CHANGE SHANK

1" HEAVY DUTY ITALIAN MADE END MILL ENDMILL HOLDER W/ NMTB40 QUICK CHANGE SHANK

  • Chino, California, United States
  • Jan 30th
LYNDEX NMTB40 DA1000 COLLET CHUCK

LYNDEX NMTB40 DA1000 COLLET CHUCK

  • Wadley, Alabama, United States
  • Jan 30th
1" HEAVY DUTY GERMAN MADE END MILL ENDMILL HOLDER W/ NMTB40 QUICK CHANGE SHANK

1" HEAVY DUTY GERMAN MADE END MILL ENDMILL HOLDER W/ NMTB40 QUICK CHANGE SHANK

  • Chino, California, United States
  • Jan 30th
WALTER WAUKESHA CAT 50 3" DIA. CARBIDE INSERT END MILL 6404-8030 NEW WITH SCREWS

WALTER WAUKESHA CAT 50 3" DIA. CARBIDE INSERT END MILL 6404-8030 NEW WITH SCREWS

  • Howell, Michigan, United States
  • Jan 30th
WALTER VALENITE 3.000" Indexable Milling Cutter (F2238CE.UC.076.z02.024)

WALTER VALENITE 3.000" Indexable Milling Cutter (F2238CE.UC.076.z02.024)

  • Howell, Michigan, United States
  • Jan 30th
2.5" DIA. LMT FETTE CARBIDE INDEXABLE END MILL WELDON SHANK

2.5" DIA. LMT FETTE CARBIDE INDEXABLE END MILL WELDON SHANK

  • Howell, Michigan, United States
  • Jan 30th
SANDVIK CAPTO C5-A391.05-25 025 SIDE AND FACE MILL ADAPTER BRAND NEW C5

SANDVIK CAPTO C5-A391.05-25 025 SIDE AND FACE MILL ADAPTER BRAND NEW C5

  • Howell, Michigan, United States
  • Jan 30th
SANDVIK COROMANT RA215-A102R38-25M Plunge Cutter,RA215-A102R38-25M G7262683

SANDVIK COROMANT RA215-A102R38-25M Plunge Cutter,RA215-A102R38-25M G7262683

  • Howell, Michigan, United States
  • Jan 30th
End Milling tool: 2"x 7-1/8" overall , shank is 2-3/8" long 1-1/4"dia.

End Milling tool: 2"x 7-1/8" overall , shank is 2-3/8" long 1-1/4"dia.

  • Struthers, Ohio, United States
  • Jan 30th
LMT Fette FMT87 S12-600AD 6.0" Dia 87 Deg Twincut Face Mill

LMT Fette FMT87 S12-600AD 6.0" Dia 87 Deg Twincut Face Mill

  • Barberton, Ohio, United States
  • Jan 30th
Wilson rockwell hardness tester anvil

Wilson rockwell hardness tester anvil

  • United States
  • Jan 30th
Ingersoll face mill DN6H050R00 + 10pcs SNGU 1205ENN IN2505 Carbide Inserts

Ingersoll face mill DN6H050R00 + 10pcs SNGU 1205ENN IN2505 Carbide Inserts

  • Schweinfurt, Germany
  • Jan 30th
APT TRI-DEX EM125 CARBIDE INSERT END MILL W/ R8 SHANK FOR MILLING MACHINE CUTTER

APT TRI-DEX EM125 CARBIDE INSERT END MILL W/ R8 SHANK FOR MILLING MACHINE CUTTER

  • Waterford, Michigan, United States
  • Jan 30th
CINCINNATI MILLING MACHINE CHANGE GEAR 60T MACHINIST TOOLING

CINCINNATI MILLING MACHINE CHANGE GEAR 60T MACHINIST TOOLING

  • Waterford, Michigan, United States
  • Jan 30th
GAMBIN Horizontal/Vertical milling machine

GAMBIN Horizontal/Vertical milling machine

  • Trois-Rivieres, Quebec, Canada
  • Jan 30th
Ingersoll face mill DM5G050R00 suitable for PNCU 08 Carbide Inserts TOP!!!

Ingersoll face mill DM5G050R00 suitable for PNCU 08 Carbide Inserts TOP!!!

  • Schweinfurt, Germany
  • Jan 30th
Iscar Face Mill H490 F90AX D080-7-27-17 + 10 pcs ANKX 1706..Carbide Inserts

Iscar Face Mill H490 F90AX D080-7-27-17 + 10 pcs ANKX 1706..Carbide Inserts

  • Schweinfurt,Bayern, Germany, Germany
  • Jan 30th
How To Make Build Milling Arm For Your Drill Press Mill Steel Machine Machining

How To Make Build Milling Arm For Your Drill Press Mill Steel Machine Machining

  • Port Alberni, British Columbia, Canada
  • Jan 30th

People who viewed this item also vieved

Carboloy Lathe Tool Holder 1" Tall Shank marked MCLNL 16 4D

Carboloy Lathe Tool Holder 1" Tall Shank marked MCLNL 16 4D

  • Lake Village, Indiana, United States
  • Feb 21st
SANDVIK Lathe Tool Holder With 3/4" Tall Shank marked PAPL 12M & KNUX Inserts

SANDVIK Lathe Tool Holder With 3/4" Tall Shank marked PAPL 12M & KNUX Inserts

  • Lake Village, Indiana, United States
  • Feb 21st
South Bend 9" lathe headstock gear guards shields with bull gear pin cover later

South Bend 9" lathe headstock gear guards shields with bull gear pin cover later

  • Yakima, Washington, United States
  • Feb 21st
CHEVALIER SURFACE GRINDER 6"x18" FSG-618M (28717)

CHEVALIER SURFACE GRINDER 6"x18" FSG-618M (28717)

  • Cincinnati, Ohio, United States
  • Mar 8th
Top Cat 400DH Die Grinder 20000 RPM 90psi 62Bar

Top Cat 400DH Die Grinder 20000 RPM 90psi 62Bar

  • Middlebury, Indiana, United States
  • Mar 8th
Boyar Schultz Challenger Deluxe 6X 18 Manual Surface Grinder

Boyar Schultz Challenger Deluxe 6X 18 Manual Surface Grinder

  • Buffalo, South Carolina, United States
  • Mar 8th
DAIKIN AKS35K OILCON Hydraulic Oil Chiller Unit for CNC

DAIKIN AKS35K OILCON Hydraulic Oil Chiller Unit for CNC

  • United States
  • Mar 8th
DAIKIN AKS35AK OILCON Hydraulic Oil Chiller Unit for CNC 5 Gallon Reservoir

DAIKIN AKS35AK OILCON Hydraulic Oil Chiller Unit for CNC 5 Gallon Reservoir

  • United States
  • Mar 8th
Vintage Machine Tool Graphite Lubricant Puffer Double Channell 979

Vintage Machine Tool Graphite Lubricant Puffer Double Channell 979

  • Antioch, California, United States
  • Mar 9th
DORMER 3/8" 18 TAPS E710 NORM HSS QTY1 (LOC1488B)

DORMER 3/8" 18 TAPS E710 NORM HSS QTY1 (LOC1488B)

  • Laingsburg, Michigan, United States
  • Mar 9th
DORMER 1/2" 13 TAPS E874 SHARK 2B UNC JN40 QTY1 (LOC1489)

DORMER 1/2" 13 TAPS E874 SHARK 2B UNC JN40 QTY1 (LOC1489)

  • Laingsburg, Michigan, United States
  • Mar 9th
ACME #2 T A 1" SPADE DRILL 232T 1000 SHT 1"SS 1" SHANK 8" OAL (LOC1490)

ACME #2 T A 1" SPADE DRILL 232T 1000 SHT 1"SS 1" SHANK 8" OAL (LOC1490)

  • Laingsburg, Michigan, United States
  • Mar 9th
DC Morrison Keyseater 1-1/4" Heavy Duty (28815)

DC Morrison Keyseater 1-1/4" Heavy Duty (28815)

  • Cincinnati, Ohio, United States
  • Mar 12th
Gulfstream Jet GII, GIII, GIV Nose Gear Scissor Link Pin Handle 1159RDL208-11

Gulfstream Jet GII, GIII, GIV Nose Gear Scissor Link Pin Handle 1159RDL208-11

  • Newhall, California, United States
  • Mar 12th
Empire CMZ-7R Power rotary crimping machine

Empire CMZ-7R Power rotary crimping machine

  • Trenton, New Jersey, United States
  • Mar 12th
Machinist Tool Scraper, 18" Aluminum, Dapra Anderson Biax, Gasket scraper

Machinist Tool Scraper, 18" Aluminum, Dapra Anderson Biax, Gasket scraper

  • South Saint Paul, Minnesota, United States
  • May 7th
LAPMASTER 15 Lapper

LAPMASTER 15 Lapper

  • San Jose, California, United States
  • May 8th
SUNNEN HONE M27-J85 STONE SET

SUNNEN HONE M27-J85 STONE SET

  • Corbin, Kentucky, United States
  • May 8th
MACHINIST'S STARRETT #120 PRECISION 0-6" DIAL CALIPER IN CASE

MACHINIST'S STARRETT #120 PRECISION 0-6" DIAL CALIPER IN CASE

  • Golden Valley, Arizona, United States
  • Jun 7th
GEOMETRIC CHASERS FOR 5/16" DS DIE HEAD QUALITY CHASER 5/16"-32 15 DEGREE HOOK

GEOMETRIC CHASERS FOR 5/16" DS DIE HEAD QUALITY CHASER 5/16"-32 15 DEGREE HOOK

  • Lindenhurst, New York, United States
  • Jun 8th
GEOMETRIC 4-40 GROUND CHASERS FOR 5/16" D,DS,DSA DIEHEAD 060915MB6

GEOMETRIC 4-40 GROUND CHASERS FOR 5/16" D,DS,DSA DIEHEAD 060915MB6

  • Fox Lake, Illinois, United States
  • Jun 9th
DoAll Bandsaw Parts ML 16 Transmission Pulley Speed Hand Crank With Linkage

DoAll Bandsaw Parts ML 16 Transmission Pulley Speed Hand Crank With Linkage

  • King of Prussia, Pennsylvania, United States
  • May 24th
DoAll Bandsaw Parts ML High/Low Transmission Switch

DoAll Bandsaw Parts ML High/Low Transmission Switch

  • King of Prussia, Pennsylvania, United States
  • May 24th
Doall bandsaw

Doall bandsaw

  • Joplin, Missouri, United States
  • May 24th
Wire edm agie cap.

Wire edm agie cap.

  • Horseheads, New York, United States
  • May 24th
AGIE AC100: Process Regulator Device PRD-17A with AUX-14A

AGIE AC100: Process Regulator Device PRD-17A with AUX-14A

  • Etobicoke, Ontario, Canada
  • May 24th
MITSUBISHI M25J Sinker EDM (1990)

MITSUBISHI M25J Sinker EDM (1990)

  • Janesville, Wisconsin, United States
  • May 24th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies