Omega Engineering Cn9000 Microprocessor Based Temperature Controller Cn9121a

US $200

Phoenix, Arizona, United States
May 31st

Open on mobile:
QR code

All items are sold as is without warranty unless specifically stated in the posting. This does not mean that the unit doesn’t work, only that we have not tested or checked it out. This may also mean that we are not knowledgeable in this specific item. The Item may vary from picture as manufacture may change model appearance. MHZ ELECTRONICS INC. - CALL BRENT - 1-866-MHZ-ELEC - MHZ ELECTRONICS INC. - CALL BRENT - 1-866-MHZ-ELEC - MHZ ELECTRONICS INC. - CALL BRENT - 1-866-MHZ-ELEC - MHZ ELECTRONICS INC. - CALL BRENT - 1-866-MHZ-ELEC - Omega Engineering CN9000 Series Microprocessor Based Temperature Controller CN9121A comes with what you see in the pictures. If you don't see it, you probably won’t get it. Specifications are from manufacturer and may vary slightly due to upgrades, options, or revisions this unit may or may not have. eBay’s description of “USED or FOR PARTS OR NOT WORKING” and our description of “USED or FOR PARTS OR NOT WORKING” is different, therefore because eBay requires the filling in of this field, we state as “USED or FOR PARTS OR NOT WORKING” PLEASE READ OUR “CONDITION” for our description of “USED or FOR PARTS OR NOT WORKING” Model Number: CN9121A Serial Number: Quantity Available (WD6739/2-336 - Pictured) Electrical Requirements: 115 Volts, 50-60 Hz Retail Price: $255.00 Condition: Used General Description: The CN9000A digital temperature controllers feature high accuracy and reliability, and the sophisticated PID with approach control for optimal control during start-up and steady-state operation. These units are well suited for a broad range of applications, and are easy to install and operate. The unique, sophisticated autotune algorithm will calculate the optimum PID values, and additionally recommends the best value for cycle time. For most applications, the user need only select the desired input type, simply by using the front pushbuttons. The autotune parameters can be changed by the operator at any time, allowing the operator to fine tune the controller to an individual process. The microprocessor holds all data in non-volatile memory, with the ability to retain data for 10 years with no power. The CN9000A has a large, 3 1/2 digit green LED readout, with auxiliary indicators for each output, and 3 LED’s to indicate deviation from setpoint. Selection of all operational controls is made through the keys on the front panel, with the display prompting the user through each step. After the parameters have been set, they can be locked in, simply by removing a jumper located behind the front bezel. The user can select the control mode and parameters, display resolution (1 or 0.1°), and units (°F/°C). The operator can also utilize the ranging feature, which limits the range in which the setpoint may be chosen, or lock out a user from changing the setpoint. The new single setpoint controller has rear termination. The optional second setpoint and output of the CN9000A model can be set for proportional, on-off or latching limit control, and can be set as either a tracking or non-tracking setpoint. Cycle time, proportional band and on-off deadband are all set independently of the primary setpoint. Features & Benefits: 1/16 DIN Cutout User Selectable Input from 9 Thermocouple Types or RTD Input Clear 3 1/2 Digit High Brightness Green LED Display 0.1° Resolution to 200° Constant Setpoint Deviation Indication Auto/Manual Output Control User Select from Autotune PID, PI, PD, P or On/Off Control Independent Second Setpoint and Output Models Comprehensive Alarm Features Deviation, Full Scale, Loop Break with Latching Option Fault Indication for Sensor Burnout, Sensor Short, Heater Break and Process Diagnostics Min/Max Data Storage and Autotune Diagnostics Eliminates Need for Chart Recorder For More Pictures Please Click the Following: Picture 2 Picture 3 Picture 4 Picture 5 Picture 6 The charge for freight will be determined by the destination upon the ending of the auction. There will be a packing fee on larger and heavier items it will be determined by the size and the care that has to go into packing an item. Most of the time, people are impressed with the job we do because we customize our own skids for larger items and we take the utmost care to provide a safe and cozy journey for your item. We strive to make our customers happy and want you to feel that we have treated you with the ultimate respect. Disclaimer: The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item. MHz Electronics Inc. 2801 East Washington Street Phoenix, AZ 85034 602-681-9100 4-24-2015 BF Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items.