Ormec Servo Drive Sac-sdm405-soaoo Rev 1.0.05

US $50.00

  • Cleveland, Ohio, United States
  • Jan 29th
Ormec Servo Drive SAC-SDM405-SOAOO SD series Servowire Rev 1.0.05 Unit has Analog option Main Circuit Power: 230 - 480 VAC +10%, -20%, 50/60 Hz, three phase Control Circuit Power: 115 or 230 VAC, +15%, -20%, 50/60 Hz, 56 watts RMS, single phase (230 VAC only on SDM435 and SDM450 models) Position Command/Control Loop Update Rates :Position loop updated on command at up to 2.66 kHz (application dependent).  Velocity loop update rate: up to 5 kHz. Torque loop update rate: 10 kHz ServoWire® Drive Output:  2,400 to 24,000 watts of output power (see Servomotor Selection Charts for power requirements on matching drives). IGBT pulse width-modulated with sinusoidal or trapezoidal commutation. Internal shunt regulator for regenerative load dissipation. Peak currents up to 200% of RMS continuous capability ServoWire® Drive I/O: High speed sensor inputs are software configurable for NPN or PNP output transistors, level or edge triggered response, one microsecond position capture and can initiate motion within one servo loop update.  Externally powered 5-24 VDC optically isolated general purpose I/O and motor encoder reference output, controlled at the servoloop update Motor Feedback Interface: Encoder or Resolver Interface. Quadrature feedback 4x decoding with data rates to 8 MHz (after decode) and open wire detection. Three differential input channels for motor commutation feedback. Support for serial encoders including Yaskawa Sigma II and Tamagawa. Industry standard D-sub interface connector (25-pin: Encoder/female; Resolver/male)  Input for high temp contact from motor The drive is NOS, surplus. Drive was removed before startup due to design change to installation. No packaging or documentation. Local pickup available Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items.
Condition New other (see details) :
A new, unused item with absolutely no signs of wear. The item may be missing the original packaging, or in the original packaging but not sealed. The item may be a factory second or a new, unused item with defects. See the seller’s listing for full details and description of any imperfections.
Seller Notes New old stock, surplus removed before startup

Directions

Similar products from Servo Drives, Servo Packs & Operator's Panels

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies