Other Manufacturing Equipment & Tools (Manufacturing Equipment) for sale, page 5

(2) 6-3/16” long bearing shaft-mounting pulleys/gears-.8mm shaft-7/8" bearings

Franklin Lakes, New Jersey, United States
Aug 28th

FOR YOUR CONSIDERATION ARE THESE TWO SMALL 8mm (.314) BEARING SHAFT, 6-3/16" LONG WITH 2 BEARINGS FOR MOUNTING PULLEYS OR GEARS. THE BEARINGS ARE 7/8" O.D. AND 9/32"WIDE.

Doall etching pencil

Gansevoort, New York, United States
Aug 28th

DoALL Etching Pencil.

Bearing housing with flange mount & 5/16" shaft for mounting pulleys or gears

Franklin Lakes, New Jersey, United States
Aug 28th

FOR YOUR CONSIDERATION IS THIS SMALL FLANGED BEARING HOUSING WITH A 8 mm (.314) SHAFT FOR MOUNTING PULLEYS OR GEARS. THE MOUNTING BLOCK HOLES ARE 1-5/32” CENTER TO CENTER, THE HOUSING IS 11/16” (0.690”) WIDE AND IS 1-3/8” (1.363”) LONG AND THE SHAFT IS 5 5/8” (5.574”) LONG. THERE ARE TWO BALL BEARINGS IN THE HOUSING.

Bearing housing with mount-1/4" & 8mm shaft for mounting pulleys or gears

Franklin Lakes, New Jersey, United States
Aug 28th

FOR YOUR CONSIDERATION IS THIS ALUMINUM BEARING HOUSING WITH A 8mm (.314) & 1/4" SHAFT FOR MOUNTING PULLEYS OR GEARS. THE MOUNTING BLOCK HOLES ARE 1-3/8” CENTER TO CENTER, AND THE MOUNTING SCREWS ARE INCLUDED. THE HOUSING IS 1-3/4” (1.75”) WIDE AND IS 1-11/32” (1.343”) LONG AND THE SHAFT IS 4-1/2” (4.5”) LONG.

Touch probe for uccnc, mach3, linuxcnc, etc - 10 foot cable length

Rockton, Illinois, United States
Aug 28th

You are bidding on a brand new kinematic touch probe for use with a CNC router or milling machine. This touch probe is useful for edge finding, setting offsets/corners, measuring, or copying/reverse engineering existing parts. The probe can be connected to your machine controlled by UCCNC, Mach3, LinuxCNC, and any other controllers that can accept a 'probe' input that can be configured to be triggered by activation of a simple switch.

Chip brush / cca sales 1030 white bristle utility chip brush 3 inch

Owings Mills, Maryland, United States
Aug 27th

Welcome to Our ebay store...

8520-fop, upgraded to sunlight readable led kit

San Francisco, California, United States
Aug 27th

Allen Bradley 9/Series 8520-FOP, one of the most popular HMI monitors in the control industry applications. This 10.4 inch Allen Bradley 9/Series 8520-FOP is originally equipped with dual CCFL back light lamps. To extend its life and improve its performance, upgrading it to our 8520-FOP-LEDKIT is the best option.

Ultra-clean products model 1600-va 120v 1ph auto motorized shoe cleaner

Pilot Rock, Oregon, United States
Aug 27th

Stock #1825 Auto Motorized Shoe CleanerUltra-Clean Products Model 1600-VA 120V 1Ph Missing handle and Filter box in the rear of the unit.

Pilot jets 10-37.5 sub-injectors motorcycle practical parts accessories

suzhou, China
Aug 27th

Kearney & trecker cnc diagnostic test fixture 20427,used,untested,as-is

Johnson Creek, Wisconsin, United States
Aug 27th

Kearney & Trecker CNC Diagnostic test fixture 20427,used,untested,AS-ISTest interface module for control system. See the pictures for details... I found the manual here: amazon.com/Kearney-Control-Optional-Diagnostic-Operating/dp/B00IPZ31BMTitle page calls it a "PUB 629 First Edition Jan 1978 for KT/CNC equiped products Types B&C"

Fanuc a06b-6140-h206 m power supply **professionally recond**

Kokomo, Indiana, United States
Aug 27th

FANUC A06B-6140-H206 M Power Supply **PROFESSIONALLY RECOND**

Okuma crown lathe hydraulic chuck unit panel metal cover 1997

London, Ontario, Canada
Aug 27th

From 1997 Okuma Crown 762S-BB Big Bore CNC Turning center

Artypac 80 form-fill and seal

Harvey, Illinois, United States
Aug 27th

Artypac VFFS bagger in excellent condition. The capacity of the bagger is up to 100 bags/min. Specifications: -Two SmartDate 5 coders.

Allen-bradley 9/series cnc hardware control service factory oem manual binder

Federal Way, Washington, United States
Aug 27th

Manual/binder in overall good condition.

Allen-bradley 9/series cnc mill operation programming factory manual binder book

Federal Way, Washington, United States
Aug 27th

Manual/binder in overall very good condition.

Noga holding systems machinist tools

Iron Mountain, Michigan, United States
Aug 27th

Noga Holding Systems Machinist Tools. USED

Doall c305-nc band saw

McRae, Arkansas, United States
Aug 27th

MODEL C305-NC

Lot/ 4 jack o lantern pumpkin halloween shapes 4" rusty metal vintage craft sign

Twin Lakes, Wisconsin, United States
Aug 27th

Auction is for a lot of 4 metal pumpkin shapes. They measure about 4 inches across and 3 in high.Rusty, vintage, antique-y. Would be great for any arts and crafts project, signs, stencils, or could be turned into magnets easily!

K&e transverse slide for optical tooling instruments

Panguitch, Utah, United States
Aug 27th

K&E Transverse Slide for Optical Tooling Instruments. Heavy brass slide to provide lateral adjustment of K&E optical tooling instruments. One of the spring loaded hold down strips has a broken off screw.

Apco technologies cu429191 - custom labeling machine

Temecula, California, United States
Aug 27th

s AndBio Apco Technologies CU429191 - Custom Labeling Machine