Pair Of Etek Electric Motors Basket Case

US $300.00

  • Macomb, Michigan, United States
  • Jan 29th
These are two Briggs and Stratton Etek motors. Originally purchased around 2002. I ran them for several years on an electric drag motorcycle. The motorcycle held the 48 volt NEDRA record for a couple of years. One of the motors has a 1" shaft, and the other has a 7/8" shaft. At 96 volts, one of the motors spun the armature in the shaft. The 1" shaft motor. The 7/8" shaft motor had a noisy bearing so I tore it down to swap bearings, but the shaft end bearings are different. So what you have is two motors in pieces. Have been setting for a few years. The 7/8" shaft motor could be put back together, with or without a new bearing. The 1" shaft motor may be able to be reattached to the shaft, especially for a low power application. I also have 16 spare brushes without too much use. 1 of the 16 has a chip out of it. These are stock. The brushes in the holders have a higher silver content than stock. So what you see is what you get. I will separate the lot, or build up one or both motors if the buyer wants it that way. Best offers will be accepted.

Directions

Similar products from Motors with Power of 5.1 HP - 10 HP

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies