US $12.00
Condition | New other (see details)
:
A new, unused item with absolutely no signs of wear. The item may be missing the original packaging, or in the original packaging but not sealed. The item may be a factory second or a new, unused item with defects. See the seller’s listing for full details and description of any imperfections.
|
Seller Notes | “NOS- New, never used old stock” |
Directions
Similar products from Grinders
One DYNABRADE Part # 11232 Contact Arm For Use With: 14000
NEW NO BOX Ingersoll Rand die grinder PMAX90pisg/6.2 bar 20.000 rpm
Chicago Pneumatic 3490SAGAVEL 4hp Vertical Grinder 6000 rpm New
Henry Tools Die Grinder 40GHL 18,000 rpm
Dotco 10R0401-18 Air Pencil Grinder Collect 1/8''
Dotco 10L1200-36 Right Angle Die Grinder
Dotco pencil grinder 12R0410-18 60k rpm 1/8 collet
VINTAGE MASTER POWER 64 6T DIE GRINDER, UNTESTED
One DYNABRADE Part # 11352 Contact Wheels Outside Diameter 1" Wheel,Width 5/8"
Pak/10 DYNABRADE Part # 90495 1/2" (13 mm) W x 34" (864 mm) L 60 Grit
65 Sanding Belts for DYNABRADE 1/2" (13 mm) W x 34" (864 mm) L 50 +60 Grit
33 Sanding Belts for DYNABRADE 1/2" W x 44" L 50 +60 Grit
One DYNABRADE Plastic Coated Contact Wheel 12mm X 8mm w/4mm hole
One pak/4 DYNABRADE Rotor Blade Set #? (Aprox. Size 38MM long) A
One pak/4 DYNABRADE Rotor Blade Set #? (Aprox. Size 32MM long) B
One pak/4 DYNABRADE Rotor Blade Set #? 1" (Aprox. Size 25.25MM long) C
One pak/4 DYNABRADE Rotor Blade Set #? 2.25" (Aprox. Size 57MM long) D
One pak DYNABRADE Clamp Set #???
One DYNABRADE #11103 Guard For Use With Mfr. Mo. 14000
People who viewed this item also vieved
JGUN Torcgun Pneumatic Torque Wrench JGUN-A1 Single Speed, Hytorc 3/4" Dr. USA
URYU U500 NON SHUTOFF PULSE TOOL 3/8" SQUARE DRIVE
GREENLEE RATCHETING SOCKET MANUAL HAND TOOL 1/2 IN WRENCH B492003
SmartTouch Stapler, Half Strip, 25-Sheet Capacity, Black
Bostitch SB150SLBC-1 Pneumatic Cap Stapler Kit
UPHOLSTERY AIR STAPLE GUN 71 SERIES LONG NOSE PNEUMATIC STAPLER HIGH QUALITY
Texas Pneumatic TX1B Pneumatic Chisel Scaler
Ingersoll Rand 1RPMS1 Pneumatic Screwdriver
20 PC LOT AMCO & TORX PLUS AIRCRAFT TORX'S DRIVERS AIRCRAFT TOOL
Legris 3106 08 00 Nylon Push-to-Connect Fitting, Inline Union, 5/16" or 8 mm Tu.
Senco SN2-A Repair Kit, YK0021
Forney 87801 Acetylene Regulator Adaptor CGA 520 To CGA 200 B Tank to Regulat...
Donut Flush Nailer FN83A Hitachi NR83A FR350A
MAX CN70162 CN81144 Durable Driver Main Piston Unit
Paslode Signode Pneumatic Finish Nailer Air Tool E7228
Cleco 35RNAL-104M Pneumatic Angle Reversible Nutrunner (58)
Dotco 90 degree Body Pneumatic Drill Motor 3200 RPM with Pancake Drill SEEPHOTOS
Dotco 90 Degree Right Angle Small Body Drill
IR Ingersoll Rand Cyclone HA 120 12000 RPM Pneumatic Air Side Grinder
Snap on Universal Retainer Chuck for Air Chisel Guns PH200D
FSI D-100-MIL-2 HAND HYDRAULIC RIVET FASTENER INSTALLATION KIT AIRCRAFT TOOLS
BLUE-POINT TOOLS 1/2" DRIVE AIR IMPACT WRENCH AT500
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Accept All Cookies