+ Post new Ad
Palmgren 9611255 Angle vise w/base, 2.5", US $220 – Picture 0
Palmgren 9611255 Angle vise w/base, 2.5", US $220 – Picture 0

Palmgren 9611255 Angle Vise W/base, 2.5"

US $220

  • Wayland, Michigan, United States
  • Jun 9th
Open on mobile:
QR code
The hinge pin hole is drilled and reamed accurately for smooth and precise angle settings, without any lateral end play. The angle vise can be used with or without the swivel base, which provides 360 degrees of calibrated rotation. The swivel base has a 5/8" keyway and two 5/8" bolt slots for locating and mounting on the machine table. Please note that we are required by State law to collect 6% Sales Tax for shipments to Michigan addresses. We accept returns up to 14 days after you receive your order, as long as the items are in good condition and in the original packaging. Shipping charges are non-refundable, and a restock fee may apply to special orders. Please inspect your shipment packaging carefully upon delivery and note any damage with the driver. Contact us at 1-888-654-8898 for any customer service needs. The Palmgren 9611255 Angle vise with base is a 2.5" vise that offers precision and accuracy in angle measurements. Graduated in 1 degree increments from 0 to 90 degrees, the angle hinge is made of 30,000 PSI tensile strength cast iron with a fine grain structure. The base and bed are parallel to 0.004", while the jaw surface is square to 0.002". At FastoolNow, we offer combined shipping on multiple eBay purchases of different items made within a short period of time. To receive combined shipping on different items, commit to Buy It Now on eBay and wait to pay until you receive a combined invoice from us with a revised shipping total. We accept PayPal as a form of payment. The Palmgren 9611255 Angle vise without the swivel base has two 5/8" mounting lugs located on the front and back end of the vise for easy mounting. This angle vise comes with a lifetime guarantee.

Directions

Similar products from Grips & Tongs

Palmgren 9638960 Jack Screw set 3.937" to 9.055" w/pads

Palmgren 9638960 Jack Screw set 3.937" to 9.055" w/pads

  • Wayland, Michigan, United States
  • Jun 9th
Palmgren 9613152 Toolmakers vise, 2"

Palmgren 9613152 Toolmakers vise, 2"

  • Wayland, Michigan, United States
  • Jun 9th
Palmgren 9625404 Milling machine vise w/swivel base, 4"

Palmgren 9625404 Milling machine vise w/swivel base, 4"

  • Wayland, Michigan, United States
  • Jun 9th
Palmgren 9611152 Angle vise, 1.5"

Palmgren 9611152 Angle vise, 1.5"

  • Wayland, Michigan, United States
  • Jun 9th
Palmgren 9638965 Magnetic adjustable jack screw 1.575" to 2.165"

Palmgren 9638965 Magnetic adjustable jack screw 1.575" to 2.165"

  • Wayland, Michigan, United States
  • Jun 9th
Palmgren 9613154 Toolmakers vise, 4"

Palmgren 9613154 Toolmakers vise, 4"

  • Wayland, Michigan, United States
  • Jun 9th
Palmgren 9612302 Drill press vise, w/lugs, 3"

Palmgren 9612302 Drill press vise, w/lugs, 3"

  • Wayland, Michigan, United States
  • Jun 9th
Palmgren 9613164 Angle sine vise, 4"

Palmgren 9613164 Angle sine vise, 4"

  • Wayland, Michigan, United States
  • Jun 9th
Palmgren 9611253 Angle vise, 2.5"

Palmgren 9611253 Angle vise, 2.5"

  • Wayland, Michigan, United States
  • Jun 9th
Palmgren 9613162 Angle sine vise, 2"

Palmgren 9613162 Angle sine vise, 2"

  • Wayland, Michigan, United States
  • Jun 9th
MACHINIST LATHE MILL Machinist Wilton 4 1/2" Milling Drilling Vise

MACHINIST LATHE MILL Machinist Wilton 4 1/2" Milling Drilling Vise

  • Morris Plains, New Jersey, United States
  • Jun 9th
Kurt D675 Pecision Workholding Ironclad AngLock Vise

Kurt D675 Pecision Workholding Ironclad AngLock Vise

  • Hamlin, New York, United States
  • Jun 9th
NEW in Box D688 KURT ANGLOCK VISE 8.8" JAW OPENING

NEW in Box D688 KURT ANGLOCK VISE 8.8" JAW OPENING

  • Edmonds, Washington, United States
  • Jun 9th
Wilton Brink & Cotton Jeweler’s Vise Vacuum Suction Base Tool Grip

Wilton Brink & Cotton Jeweler’s Vise Vacuum Suction Base Tool Grip

  • Raleigh, North Carolina, United States
  • Jun 9th
VINTAGE ROCKWELL UNI-VISE 3 AXIS COMPOUND GRINDING,MILLING,DRILLING FIXTURE

VINTAGE ROCKWELL UNI-VISE 3 AXIS COMPOUND GRINDING,MILLING,DRILLING FIXTURE

  • Edison, New Jersey, United States
  • Jun 9th
Panavise Model 308

Panavise Model 308

  • Mount Olive, West Virginia, United States
  • Jun 9th
Lassy Rapid-Lox 5" Drill Press Speed Vise w/ Bearing Slide Rail 5R-SLV

Lassy Rapid-Lox 5" Drill Press Speed Vise w/ Bearing Slide Rail 5R-SLV

  • Lorain, Ohio, United States
  • Jun 9th
NEW 2 PC Quick Clamp Mill Vise 8" Jaw Width

NEW 2 PC Quick Clamp Mill Vise 8" Jaw Width

  • Columbus, Ohio, United States
  • Jun 9th
NEW 5 C Collet Stop Adjustable FITS ALL COLLET CHUCKS

NEW 5 C Collet Stop Adjustable FITS ALL COLLET CHUCKS

  • Columbus, Ohio, United States
  • Jun 9th
Central Forge 6" Economy Carpenter Vise With Clamp Model # 95203

Central Forge 6" Economy Carpenter Vise With Clamp Model # 95203

  • Littleton, Colorado, United States
  • Jun 9th

People who viewed this item also vieved

NEW 2MT 0.000197" OVER SIZED CARBIDE DEAD CENTER MORSE TAPER #2 LATHE CENTER

NEW 2MT 0.000197" OVER SIZED CARBIDE DEAD CENTER MORSE TAPER #2 LATHE CENTER

  • Diamond Bar, California, United States
  • Jan 30th
NEW 4" MT4 BULL NOSE LIVE CENTER MORSE TAPER 4 PIPE LIVE CENTER FOR LATHE

NEW 4" MT4 BULL NOSE LIVE CENTER MORSE TAPER 4 PIPE LIVE CENTER FOR LATHE

  • Diamond Bar, California, United States
  • Jan 30th
USED CARBIDE TIPPED #4MT LATHE DEAD CENTER with 1.244" POINT DIAMETER

USED CARBIDE TIPPED #4MT LATHE DEAD CENTER with 1.244" POINT DIAMETER

  • Fairfield, Iowa, United States
  • Jan 30th
Albrecht 73010 Keyless Drill Chuck With Integral Shank - Capacity: 1/32"-1/2" (1

Albrecht 73010 Keyless Drill Chuck With Integral Shank - Capacity: 1/32"-1/2" (1

  • Duncan, South Carolina, United States
  • Jan 30th
TMX 3-788-312 12" Soft Jaws for Power Chucks - 3 pc Set

TMX 3-788-312 12" Soft Jaws for Power Chucks - 3 pc Set

  • Duncan, South Carolina, United States
  • Jan 30th
SOFT Steel JAWS 15"3pc-1.5 mm x 60 Degree Serrations

SOFT Steel JAWS 15"3pc-1.5 mm x 60 Degree Serrations

  • Chino, California, United States
  • Jan 30th
M10 X 50MM STEEL HEAD TOGGLE CLAMP SPINDLE ASSEMBLY (3900-0356)

M10 X 50MM STEEL HEAD TOGGLE CLAMP SPINDLE ASSEMBLY (3900-0356)

  • Chino, California, United States
  • Jan 30th
Umpco Adel Cushioned 3" Loop Clamps Lot of 13

Umpco Adel Cushioned 3" Loop Clamps Lot of 13

  • Dallas, Georgia, United States
  • Jan 30th
CARR LANE, PUSH/PULL CLAMP, CL-350-SPC, 2500 LB CAPACITY

CARR LANE, PUSH/PULL CLAMP, CL-350-SPC, 2500 LB CAPACITY

  • Coffeyville, Kansas, United States
  • Jan 30th
2 SEIKI ZC20-QCV40 Z-AXIS COLLET CHUCKS TOOLHOLDERS, USES ER32 COLLET

2 SEIKI ZC20-QCV40 Z-AXIS COLLET CHUCKS TOOLHOLDERS, USES ER32 COLLET

  • Euclid, Ohio, United States
  • Jan 30th
2 KENNAMETAL KV4540-TG100325F COLLET CHUCKS FOR TG100 COLLET

2 KENNAMETAL KV4540-TG100325F COLLET CHUCKS FOR TG100 COLLET

  • Euclid, Ohio, United States
  • Jan 30th
2 KENNAMETAL KV4540-TG100825F COLLET CHUCKS, USES TG100 COLLET

2 KENNAMETAL KV4540-TG100825F COLLET CHUCKS, USES TG100 COLLET

  • Euclid, Ohio, United States
  • Jan 30th
LOt of 5C Collets, lot of 7pcs 13/16,1-1/32,7/8,35/64,29/32,21/32,47/64.

LOt of 5C Collets, lot of 7pcs 13/16,1-1/32,7/8,35/64,29/32,21/32,47/64.

  • Coventry, Rhode Island, United States
  • Jan 30th
JACOBS RUBBER FLEX COLLET J 422 09751 (LOC1243B) TS12

JACOBS RUBBER FLEX COLLET J 422 09751 (LOC1243B) TS12

  • Laingsburg, Michigan, United States
  • Jan 30th
Quick Change Tap Collet similar to valenite TAP 32 --9/16"

Quick Change Tap Collet similar to valenite TAP 32 --9/16"

  • Coventry, Rhode Island, United States
  • Jan 30th
BACKING PLATE 12" (See Pictures)

BACKING PLATE 12" (See Pictures)

  • Niles, Ohio, United States
  • Jan 30th
BACKING PLATE 10" (See Pictures)

BACKING PLATE 10" (See Pictures)

  • Niles, Ohio, United States
  • Jan 30th
FACE PLATE 15 7/8" (See Pictures)

FACE PLATE 15 7/8" (See Pictures)

  • Niles, Ohio, United States
  • Jan 30th
Browning 4036 X 1 Sprocket 1" Bore with 1/4" keyway - NEW

Browning 4036 X 1 Sprocket 1" Bore with 1/4" keyway - NEW

  • Bay City, Michigan, United States
  • Jan 30th
Unknown 4036SS X 1 Stainless Steel Sprocket, 1" Bore with 1/4" keyway - NEW

Unknown 4036SS X 1 Stainless Steel Sprocket, 1" Bore with 1/4" keyway - NEW

  • Bay City, Michigan, United States
  • Jan 30th
Martin 40BS34 X 1 Sprocket 1" Bore with 1/4" keyway - NEW

Martin 40BS34 X 1 Sprocket 1" Bore with 1/4" keyway - NEW

  • Bay City, Michigan, United States
  • Jan 30th
8 INCH TS SUPER SPACER FOR MILL MILLING NICE NO RESERVE

8 INCH TS SUPER SPACER FOR MILL MILLING NICE NO RESERVE

  • Lake Orion, Michigan, United States
  • Jan 30th
YUASA ROTARY TABLE FOR MILL MILLING MACHINIST NO RESERVE

YUASA ROTARY TABLE FOR MILL MILLING MACHINIST NO RESERVE

  • Lake Orion, Michigan, United States
  • Jan 30th
GREAT!! TROYKE 18" PRECISION ROTARY TABLE # BL-18

GREAT!! TROYKE 18" PRECISION ROTARY TABLE # BL-18

  • Chino, California, United States
  • Jan 30th
Vintage Machinists Multi Tapped Step Angle Block Plate & Parts

Vintage Machinists Multi Tapped Step Angle Block Plate & Parts

  • Center Line, Michigan, United States
  • Feb 13th
15 Shop Made Machinist Precision Parallels Blocks

15 Shop Made Machinist Precision Parallels Blocks

  • Cleveland, Ohio, United States
  • Feb 13th
Machinists 2/11 Machinists XL Brass Magnetic Trabnsfer Block

Machinists 2/11 Machinists XL Brass Magnetic Trabnsfer Block

  • Lutz, Florida, United States
  • Feb 13th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies