Philips Bodine B94c Its Emergency Light Ballast 1 Lamp 4 Pin 120/277vac

US $70.00

West Palm Beach, Florida, United States
Jan 30th

Open on mobile:
QR code

Warehouse Closeout NEW in Box retails $189.00 only 1 $70.00 free shipping Philips Bodine B94C ITS Emergency Light Ballast 1 Lamp 4 Pin 120/277VAC Fluorescent Emergency Ballast One or two-lamp emergency illumination for 4-pin fluorescent lamps (without integral starter) APPLICATION The B94C fluorescent emergency ballast works in conjunction with the AC ballast to convert new or existing fluorescent fixtures into emergency lighting. The emergency ballast consists of a high-temperature nickel cadmium battery, charger and electronic circuitry in one compact red case. The B94C can be used with one or two 6 W to 28 W tubular fluorescent lamps without integral starters, or one 13 W to 42 W or two 13 W to 39 W (4-pin) twin, quad, and triple twin-tube compacts. It is also compatible with most 1, 2, 3, and 4-lamp electronic, standard, energy saving, and dimming AC ballasts. If used in an emergency-only fixture, no AC ballast is necessary. The B94C is not suitable for use in air handling heated air outlet fixtures, and wet, damp, or hazardous location fixtures. For information about specific lamp and ballast compatibility, please call the factory. OPERATION When AC power fails, the B94C immediately switches to the emergency mode, keeping one or two lamps illuminated at a reduced lumen output for a minimum of 90 minutes. When AC power is restored, the B94C automatically returns to the charging mode. INSTALLATION The B94C does not affect normal fixture operation and may be used with either a switched or unswitched fixture. If a switched fixture is used, an unswitched hot lead must be connected to the emergency ballast. The emergency ballast must be fed from the same branch circuit as the AC ballast. The B94C may be installed on top of or remote from the fixture. The emergency ballast may be remote-installed up to half the distance the AC ballast manufacturer recommends remoting the AC ballast from the lamp, or up to 50 feet, whichever is less. For simple visual inspection of the charging indicator light and easy operational testing, the test/monitor plate can be installed near the fixture wall switch. Or, it can be installed in the ceiling near the fixture to ensure an unobtrusive installation. Installation is not recommended with fixtures where the ambient temperature may fall below 0°C for extended periods. Upon request, a single pole test switch/monitor plate is provided for remote installation of the test switch and charging indicator

Condition	New other (see details) : A new, unused item with absolutely no signs of wear. The item may be missing the original packaging, or in the original packaging but not sealed. The item may be a factory second or a new, unused item with defects. See the seller’s listing for full details and description of any imperfections.
Seller Notes	“WAREHOUSE CLOSEOUT FOUND THIS BEHIND THE SHELF UNIT COMPLETE NEW IN BOX”