Plasma Cutter Pilot Arc 50a Simadre 200a Tig Arc Mma Welder Ft Pedal Argon 520dp

US $2200

Goleta, California, United States
May 16th

Open on mobile:
QR code

SIMADRE® POWER 3IN1 520DP 50A PILOT ARC CUTTER AND 200A TIG/MMA/ARC WELDER BRAND NEW MODEL - DUAL 110V/220V 520 PILOT ARC MODEL!!! - This unit comes with One Year Warranty WITH HIGH-PERFORMANCE PILOT ARC CUTTING TORCH and FOOTPEDAL, AIR REGULATOR!!! BRAND NEW IN THE BOX with ACCESSORIES and FREE CONSUMABLES! THREE MACHINES INTEGRATED IN ONE SIMADRE DUAL VOLTAGE 110/220V 200 AMP TIG, 200 AMP ARC/MMA and 50 AMP PILOT ARC PLASMA CUTTER !!! • Foot Pedal • 200 Amp Tig Torch • 200 Amp Arc/MMA Welder • Digital Current Display • High Performance Cutting Torch • Automatic sensing of incoming power source voltage and frequency 120V/240V-50/60HZ (functions between 90 & 260 volts.) • Works in both 50 and 60 Hz with operating air pressure of 70 psi @ 4 cfm. • Machine is equipped with a large cooling fan and is thermostatically protected for a longer life span. See Picture Below ! • Advanced inverter technology means high cutting and welding performance. • The newer semiconductor circuits in these machines are extremely well-designed. With reasonable care, your welder will provide you with many years of trouble-free service • Plasma Cutter is 3/4" rated with 1" severance cuts • Tig Welder has a 5/16" weld thickness and a high frequency non-contact start. • Arc/MMA Welder has a 3/16" weld thickness • CE, CCC, CSA and ISO-9001 certification Specifications: Cutting Thickness: · 3" Per minute at 1" Steel (Severance Cut) · 7" Per minute at 3/4" Thick Steel · 17" Per minute at 1/2" Thick Steel Input voltage AC 110/220±15% 50/60Hz Input Power Capacitance 7.1 kva No-load loss(W) 40 Duty cycle (%) 60 Power factor 0.93 Efficiency (%) 85 Insulation class B Protection class IP21 TIG MMA CUT Input current(A) 21 32 28.6 Rated output current 200A 200A 50A Current range 15-200 15-200 20-50 No –load voltage(V) 62 62 250 Cut thickness(mm) - - 1-16 Arc-leading HF Touch PA Unit size: 21x8x11" Unit weight: 32 lbs Package weight: 55 lbs It comes with: • Pilot arc cutting torch. • Tig Welding Torch (with long and short caps) • Ground cable with clamp. • Stick (ARC) Holder • Initial Consumables • User Manual • You shall provide 60~70 psi air supply, 110v or 220v power plug for plasma cutting • You shall provide argon regulator, tank for tig welding Shipping to pr, ak, hi, guam and military stations outside usa will be charged extra per the location. Signature confirmation available upon request at no additional charge

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	SIMADRE
MPN	SIM-520DP
Input Amperage	50 amps
Item Type	Plasma Cutter
UPC	Does not apply