+ Post new Ad
Pneumatic 5C Collet Closer by Royal Products. EXCELLENT CONDITION!, US $1,200.00 – Picture 0
Pneumatic 5C Collet Closer by Royal Products. EXCELLENT CONDITION!, US $1,200.00 – Picture 1
Pneumatic 5C Collet Closer by Royal Products. EXCELLENT CONDITION!, US $1,200.00 – Picture 2
Pneumatic 5C Collet Closer by Royal Products. EXCELLENT CONDITION!, US $1,200.00 – Picture 3
Pneumatic 5C Collet Closer by Royal Products. EXCELLENT CONDITION!, US $1,200.00 – Picture 4
Pneumatic 5C Collet Closer by Royal Products. EXCELLENT CONDITION!, US $1,200.00 – Picture 5
Pneumatic 5C Collet Closer by Royal Products. EXCELLENT CONDITION!, US $1,200.00 – Picture 6
Pneumatic 5C Collet Closer by Royal Products. EXCELLENT CONDITION!, US $1,200.00 – Picture 7
Pneumatic 5C Collet Closer by Royal Products. EXCELLENT CONDITION!, US $1,200.00 – Picture 0
Pneumatic 5C Collet Closer by Royal Products. EXCELLENT CONDITION!, US $1,200.00 – Picture 1
Pneumatic 5C Collet Closer by Royal Products. EXCELLENT CONDITION!, US $1,200.00 – Picture 2
Pneumatic 5C Collet Closer by Royal Products. EXCELLENT CONDITION!, US $1,200.00 – Picture 3
Pneumatic 5C Collet Closer by Royal Products. EXCELLENT CONDITION!, US $1,200.00 – Picture 4
Pneumatic 5C Collet Closer by Royal Products. EXCELLENT CONDITION!, US $1,200.00 – Picture 5
Pneumatic 5C Collet Closer by Royal Products. EXCELLENT CONDITION!, US $1,200.00 – Picture 6
Pneumatic 5C Collet Closer by Royal Products. EXCELLENT CONDITION!, US $1,200.00 – Picture 7

Pneumatic 5c Collet Closer By Royal Products. Excellent Condition!

US $1,200.00

  • Randleman, North Carolina, United States
  • Jan 30th
Open on mobile:
QR code
Up for auction, one gently used, Royal Products Pneumatic 5C Collet Closing System, for use on any manual tool room lathe. System comes complete and ready to install; just add your choice of open/close switch-lever action, foot pedal, or even solenoid. Easily installs in minutes. A true Royal System, proudly made right here in the USA; no sloppy "off shore" junk here. It is in superb condition. This unit was fully disassembled, cleaned, and inspected prior to reassembly. Even the high definition photos do not do it justice; absolutely in excellent condition. The collet alignment key provides a positive location and slides effortlessly into the collet. Take a look at the Royal Products website through this link.                  http://www.royalprod.com/content/files/products/5C_Collet_Closers.pdf Listed below are the specs taken directly from the Royal Products website: Draw tube capacity -- I 1/16" Max. Operational RPM -- 4,000 Max. Air Pressure -- 90 psi Max. Draw tube Force -- 1,325 lbs. Max. Clamping Force -- 4,520 lbs. This item lists for around $2,700 new. The item for sale is as close to "New" as it gets in the used market; $1,200 OBO(336) 672-1815 (6:00 am -- 2:00 pm weekdays) (336) 521-1829 (text or call any time)
Condition Seller refurbished :
An item that has been restored to working order by the eBay seller or a third party not approved by the manufacturer. This means the item has been inspected, cleaned, and repaired to full working order and is in excellent condition. This item may or may not be in original packaging. See the seller’s listing for full details.
Seller Notes “Completely disassembled, inspected, cleaned, and reassembled. Superb example.”

Directions

Similar products from Collet Chucks & Sets

BILZ SCK1-275 HSK-A100/2 ESX20-BL ER-20 COLLET CHUCK

BILZ SCK1-275 HSK-A100/2 ESX20-BL ER-20 COLLET CHUCK

  • Euclid, Ohio, United States
  • Jan 30th
2 MORRIS TOOLING ER-32 COLLET TAP CHUCKS, AUTOMATIVE SHANK

2 MORRIS TOOLING ER-32 COLLET TAP CHUCKS, AUTOMATIVE SHANK

  • Euclid, Ohio, United States
  • Jan 30th
3 PILZ P4 TR28X2-ESX32 ER-32 COLLET CHUCK, TENSION & COMPRESSION

3 PILZ P4 TR28X2-ESX32 ER-32 COLLET CHUCK, TENSION & COMPRESSION

  • Euclid, Ohio, United States
  • Jan 30th
Jacobs rubber - flex 500 series collet set Qty 10 .100 to 1.062

Jacobs rubber - flex 500 series collet set Qty 10 .100 to 1.062

  • Milwaukee, Wisconsin, United States
  • Jan 30th
Universal acura-flex collet holder

Universal acura-flex collet holder

  • Skokie, Illinois, United States
  • Jan 30th
Premier Industrial Heavy Duty STEEL 1/4" inch diesLETTER Character MADE IN USA

Premier Industrial Heavy Duty STEEL 1/4" inch diesLETTER Character MADE IN USA

  • Roanoke, Virginia, United States
  • Jan 30th
HORIZONTAL VERTICAL 5C COLLET INDEXING FIXTURE

HORIZONTAL VERTICAL 5C COLLET INDEXING FIXTURE

  • Jamison, Pennsylvania, United States
  • Jan 30th
COMMAND BT30 TG100 COLLET CHUCK B2C4-1000

COMMAND BT30 TG100 COLLET CHUCK B2C4-1000

  • Wadley, Alabama, United States
  • Jan 30th
LYNDEX BT30 ER16 COLLET CHUCK - NEW, FACTORY SEALED PACKAGE B3007-0016

LYNDEX BT30 ER16 COLLET CHUCK - NEW, FACTORY SEALED PACKAGE B3007-0016

  • Fleetwood, Pennsylvania, United States
  • Jan 30th
2 JACOBS COLLET CHUCKS SET, RUBBER-FLEX J910 - J920 MACHINIST TOOL

2 JACOBS COLLET CHUCKS SET, RUBBER-FLEX J910 - J920 MACHINIST TOOL

  • Mishawaka, Indiana, United States
  • Jan 30th
Star CNC Power Tools 541-78

Star CNC Power Tools 541-78

  • Raleigh, North Carolina, United States
  • Jan 30th
NEW Riken Collet Chuck w/ Accessories, AD-40E, NIB, O-CHS-244, 7H003012

NEW Riken Collet Chuck w/ Accessories, AD-40E, NIB, O-CHS-244, 7H003012

  • Grand Rapids, Michigan, United States
  • Jan 30th
Pratt Burnerd KC15 collet chuck D-5 mount

Pratt Burnerd KC15 collet chuck D-5 mount

  • Miami, Florida, United States
  • Jan 30th
EXTENDED DA 200 COLLET CHUCK AND ERICKSON COLLETS (3/8 - 5/16 - 1/4 - 15/64)

EXTENDED DA 200 COLLET CHUCK AND ERICKSON COLLETS (3/8 - 5/16 - 1/4 - 15/64)

  • Camarillo, California, United States
  • Jan 30th
CNC LATHE COLLET CHUCK A-8 MOUNT 3J COLLETS

CNC LATHE COLLET CHUCK A-8 MOUNT 3J COLLETS

  • Colorado Springs, Colorado, United States
  • Jan 30th
COLLET CHUCK 1/2"-DA300 WITH 19 COLLETS

COLLET CHUCK 1/2"-DA300 WITH 19 COLLETS

  • Gardnerville, Nevada, United States
  • Jan 30th
CARBOLOY CAT 40 TG100 COLLET CHUCK CV40-CC-5.19-1000

CARBOLOY CAT 40 TG100 COLLET CHUCK CV40-CC-5.19-1000

  • Wadley, Alabama, United States
  • Jan 30th
Microcentric CB-65D Collet Chuck with L250 Collet

Microcentric CB-65D Collet Chuck with L250 Collet

  • Sun Prairie, Wisconsin, United States
  • Jan 30th
Hardinge Sjogren No. 2 Speed Chuck for 2J collets, good condition

Hardinge Sjogren No. 2 Speed Chuck for 2J collets, good condition

  • Modesto, California, United States
  • Jan 30th
SHARS ER50 ER 50M M Mini Collet Nut For CNC CAT40 Tool Holder NEW

SHARS ER50 ER 50M M Mini Collet Nut For CNC CAT40 Tool Holder NEW

  • Saint Charles, Illinois, United States
  • Jan 30th

People who viewed this item also vieved

HHIP 3900-5063 MT3 Steel Dead Center

HHIP 3900-5063 MT3 Steel Dead Center

  • USA, United States
  • Jun 7th
HHIP 3900-5057 MT2 Carbide Tipped Single Point Dead Center

HHIP 3900-5057 MT2 Carbide Tipped Single Point Dead Center

  • USA, United States
  • Jun 7th
HHIP 3900-5065 MT5 Steel Dead Center

HHIP 3900-5065 MT5 Steel Dead Center

  • USA, United States
  • Jun 7th
2000 Lb SOUTHWORTH HYDRAULIC LIFT TABLE 48" x 48" (29425)

2000 Lb SOUTHWORTH HYDRAULIC LIFT TABLE 48" x 48" (29425)

  • Cincinnati, Ohio, United States
  • Jun 8th
Interstate Angle Plate 6" x 6" x 6" Precision Ground and Webbed Cast Iron 4F

Interstate Angle Plate 6" x 6" x 6" Precision Ground and Webbed Cast Iron 4F

  • Saint Louis, Missouri, United States
  • Jun 8th
Craftsman 109 Forward & Reverse change gear assembly,with 20 and 24 teeth gears

Craftsman 109 Forward & Reverse change gear assembly,with 20 and 24 teeth gears

  • Williamston, Michigan, United States
  • Jun 8th
Lot of 9 Hardinge/Enco/ETC 1/16" thru 1" 5C Lathe Collets Just $19.99 LOOK!

Lot of 9 Hardinge/Enco/ETC 1/16" thru 1" 5C Lathe Collets Just $19.99 LOOK!

  • Boulder Junction, Wisconsin, United States
  • Jun 9th
Lot Of 33 New 5C Hardinge Collets Various Sizes Lathe Machinist Tooling

Lot Of 33 New 5C Hardinge Collets Various Sizes Lathe Machinist Tooling

  • Olathe, Kansas, United States
  • Jun 9th
ER16 Spring Collet 4mm

ER16 Spring Collet 4mm

  • Shenzhen, China
  • Jun 9th
Starrett 161C Toolmakers Parallel Clamp, 3/4" Capacity, 21/32" Throat Depth

Starrett 161C Toolmakers Parallel Clamp, 3/4" Capacity, 21/32" Throat Depth

  • Brooklyn, New York, United States
  • Jun 9th
Starrett 161AA Toolmakers Parallel Clamp, 3/4" Capacity, 21/32" Throat Depth

Starrett 161AA Toolmakers Parallel Clamp, 3/4" Capacity, 21/32" Throat Depth

  • Brooklyn, New York, United States
  • Jun 9th
Starrett 161B Toolmakers Parallel Clamp, 3/4" Capacity, 21/32" Throat Depth

Starrett 161B Toolmakers Parallel Clamp, 3/4" Capacity, 21/32" Throat Depth

  • Brooklyn, New York, United States
  • Jun 9th
New Heinrich Pneumatic Double Acting Air Vise DA 4401 - 4 foot treadle - 3 hoses

New Heinrich Pneumatic Double Acting Air Vise DA 4401 - 4 foot treadle - 3 hoses

  • Morrisville, North Carolina, United States
  • Jun 9th
United Manufacturing Company - Framers 90 Degree Corner Vise/Clamp #2

United Manufacturing Company - Framers 90 Degree Corner Vise/Clamp #2

  • Oklahoma City, Oklahoma, United States
  • Jun 9th
Wilton Vise Drill Press 6" Jaw Width 6.5 Clamp Wide Bench Machinist Mill Milling

Wilton Vise Drill Press 6" Jaw Width 6.5 Clamp Wide Bench Machinist Mill Milling

  • Baton Rouge, Louisiana, United States
  • Jun 9th
Seoam 6" 3-Jaw Hydraulic Chuck

Seoam 6" 3-Jaw Hydraulic Chuck

  • Altamonte Springs, Florida, United States
  • Jun 9th
Kitagawa B-12 12" 3-Jaw Hydraulic Chuck

Kitagawa B-12 12" 3-Jaw Hydraulic Chuck

  • Altamonte Springs, Florida, United States
  • Jun 9th
Kitagawa B-206 6" 3-Jaw Hydraulic Chuck

Kitagawa B-206 6" 3-Jaw Hydraulic Chuck

  • Altamonte Springs, Florida, United States
  • Jun 9th
17-Piece Machining Angle Blocks - Machinists Mill Drill Cut Setup Tools

17-Piece Machining Angle Blocks - Machinists Mill Drill Cut Setup Tools

  • Englishtown, New Jersey, United States
  • Nov 6th
RECTANGULAR BLOCK MACHINIST GROUND PRECISION 12" x 8" x 5" RISER

RECTANGULAR BLOCK MACHINIST GROUND PRECISION 12" x 8" x 5" RISER

  • Naperville, Illinois, United States
  • Nov 6th
V-BLOCK MACHINIST 7" x 6" x 6" GROUND PRECISION

V-BLOCK MACHINIST 7" x 6" x 6" GROUND PRECISION

  • Naperville, Illinois, United States
  • Nov 6th
100 mm 3 jaws Self Centering chuck+Set of Reversible Jaws+ Chuck key

100 mm 3 jaws Self Centering chuck+Set of Reversible Jaws+ Chuck key

  • New Delhi, Delhi, India
  • Nov 14th
100 mm Self Centering chuck+Rev.Jaws+ Back plate has mt2 spigot to guide in bore

100 mm Self Centering chuck+Rev.Jaws+ Back plate has mt2 spigot to guide in bore

  • New Delhi, Delhi, India
  • Nov 14th
Rotary Axis Unit for JEWELRY- Upgrade CNC to Four Axis

Rotary Axis Unit for JEWELRY- Upgrade CNC to Four Axis

  • Chateauguay, Quebec, Canada
  • Nov 14th
Wilton No.301 Pow R Arm Fast On Off Action Mechanical Work Positioner, Vintage

Wilton No.301 Pow R Arm Fast On Off Action Mechanical Work Positioner, Vintage

  • Waverly, Nebraska, United States
  • May 25th
Massive Magnetic 3 Three Chuck Jaws Set Look New N-102

Massive Magnetic 3 Three Chuck Jaws Set Look New N-102

  • Newbury Park, California, United States
  • May 26th
Heinrich Single Acting Air Vise w/ Foot Pedal Control Model 33 PARTS/REPAIR

Heinrich Single Acting Air Vise w/ Foot Pedal Control Model 33 PARTS/REPAIR

  • Venice, Florida, United States
  • May 26th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies