+ Post new Ad
Precision Twist Taper Length Drill #51 118 Deg HSS L 3 3/4" Flute 2" [Misc.], US $8.85 – Picture 0
Precision Twist Taper Length Drill #51 118 Deg HSS L 3 3/4" Flute 2" [Misc.], US $8.85 – Picture 0

Precision Twist Taper Length Drill #51 118 Deg Hss L 3 3/4" Flute 2" [misc.]

US $8.85

  • Summerville, South Carolina, United States
  • Jan 30th
Open on mobile:
QR code
Precision Twist Taper Length Drill #51 118 Deg HSS L 3 3/4" Flute 2" Precision Twist taper length drill bits have longer flutes and a longer overall length than jobber twist drill bits, which allows for deeper drilling. The shank diameter is the same as the drill bit size. High speed steel drill bits are for use with a wide variety of materials including steel, cast iron, and forgings. Drill point is standard 118 degree point. Brand Name Precision Twist Mfr Part # DRL-TLD51-01 Material Type High Speed Steel Finish Types Uncoated (Bright) Pkg Qty 1 Cutting Angle 118  Degrees Drill Point Conventional Flute Length 2  inches Flute Type Spiral Number of Flutes 2 Outside Diameter 0.0670  inches Overall Length 3 3/4  inches Shank Material Type High Speed Steel Shank Type Round Shank Width .067  inches Size #51 System of Measurement Wire Gauge UNSPSC Code 20121600   Call us at 1-843-261-9553 / 1-800-961-2124 or contact us via eBay with any questions.

Directions

Similar products from Extended Length Drills

Precision Twist Taper Length Drill #7 118 Degree HSS Overall Length 6" Flute

Precision Twist Taper Length Drill #7 118 Degree HSS Overall Length 6" Flute

  • Summerville, South Carolina, United States
  • Jan 30th
Precision Twist 2ACO 3.75 Mm Metric Cobalt Drill 135 Deg NAS 907 39mm Flute

Precision Twist 2ACO 3.75 Mm Metric Cobalt Drill 135 Deg NAS 907 39mm Flute

  • Summerville, South Carolina, United States
  • Jan 30th
Diager 7.1mm (9/32") Carbide Tipped Long Reach Twist Drill Bit - NOS

Diager 7.1mm (9/32") Carbide Tipped Long Reach Twist Drill Bit - NOS

  • Hillsboro, Ohio, United States
  • Jan 30th
Twist Drill Bit 3/4"

Twist Drill Bit 3/4"

  • Coventry, Rhode Island, United States
  • Jan 30th
20 HSS / Cobalt Drill Bits - 1/4" - 6" .243"-.253"

20 HSS / Cobalt Drill Bits - 1/4" - 6" .243"-.253"

  • Goddard, Kansas, United States
  • Jan 30th
UNION 39/64 DRILL BIT TAPER LENGTH

UNION 39/64 DRILL BIT TAPER LENGTH

  • Bethlehem, Connecticut, United States
  • Jan 30th
Machinist Tools 40 pc Extra Length Drill Assortment ,Lathe, Mill, Shop

Machinist Tools 40 pc Extra Length Drill Assortment ,Lathe, Mill, Shop

  • Rochester, New York, United States
  • Jan 30th
4 Machinist Long Drill-Countersink Bits Tool & Die Turning

4 Machinist Long Drill-Countersink Bits Tool & Die Turning

  • Philadelphia, Pennsylvania, United States
  • Jan 30th
Precision Twist Taper Length Drill #79 118 Deg HSS L 1 1/2" Flute 5/16" [Misc.]

Precision Twist Taper Length Drill #79 118 Deg HSS L 1 1/2" Flute 5/16" [Misc.]

  • Summerville, South Carolina, United States
  • Jan 30th
Precision Twist Taper Length Drill #19 118 Deg HSS Hi Helix L 5 3/4" Flute

Precision Twist Taper Length Drill #19 118 Deg HSS Hi Helix L 5 3/4" Flute

  • Summerville, South Carolina, United States
  • Jan 30th
TWIST DRILL 41/64" X 1/2" SHANK X 5" LONG DRILL BIT HIGH SPEED

TWIST DRILL 41/64" X 1/2" SHANK X 5" LONG DRILL BIT HIGH SPEED

  • East Bethany, New York, United States
  • Jan 30th
TWIST DRILL 43/64" X 1/2" SHANK X 6.25" LONG DRILL BIT HIGH SPEED

TWIST DRILL 43/64" X 1/2" SHANK X 6.25" LONG DRILL BIT HIGH SPEED

  • East Bethany, New York, United States
  • Jan 30th
TWIST DRILL 47/64" X 1/2" SHANK X 6.25" LONG DRILL BIT HIGH SPEED

TWIST DRILL 47/64" X 1/2" SHANK X 6.25" LONG DRILL BIT HIGH SPEED

  • East Bethany, New York, United States
  • Jan 30th
TWIST DRILL 51/64" X 1/2" SHANK X 6.25" LONG DRILL BIT HIGH SPEED

TWIST DRILL 51/64" X 1/2" SHANK X 6.25" LONG DRILL BIT HIGH SPEED

  • East Bethany, New York, United States
  • Jan 30th
TWIST DRILL 25/32" X 1/2" SHANK X 6.25" LONG DRILL BIT HIGH SPEED

TWIST DRILL 25/32" X 1/2" SHANK X 6.25" LONG DRILL BIT HIGH SPEED

  • East Bethany, New York, United States
  • Jan 30th
TWIST DRILL 51/64" X 1/2" SHANK X 6" LONG DRILL BIT HIGH SPEED

TWIST DRILL 51/64" X 1/2" SHANK X 6" LONG DRILL BIT HIGH SPEED

  • East Bethany, New York, United States
  • Jan 30th
TWIST DRILL 61/64" X 1/2" SHANK X 6" LONG DRILL BIT HIGH SPEED

TWIST DRILL 61/64" X 1/2" SHANK X 6" LONG DRILL BIT HIGH SPEED

  • East Bethany, New York, United States
  • Jan 30th
TWIST DRILL 47/64" X 1/2" SHANK X 5.25" LONG DRILL BIT HIGH SPEED

TWIST DRILL 47/64" X 1/2" SHANK X 5.25" LONG DRILL BIT HIGH SPEED

  • East Bethany, New York, United States
  • Jan 30th
TWIST DRILL 49/64" X 1/2" SHANK X 6" LONG DRILL BIT HIGH SPEED

TWIST DRILL 49/64" X 1/2" SHANK X 6" LONG DRILL BIT HIGH SPEED

  • East Bethany, New York, United States
  • Jan 30th
TruCut Drill Bit 3/8" Shank x 1/2" Diameter x 18" OAL

TruCut Drill Bit 3/8" Shank x 1/2" Diameter x 18" OAL

  • Eclectic, Alabama, United States
  • Jan 30th

People who viewed this item also vieved

12 New PTD 3/16" x 3-5/8 " Diam 4.9mm DRILL BITS 2A

12 New PTD 3/16" x 3-5/8 " Diam 4.9mm DRILL BITS 2A

  • Highland Park, Michigan, United States
  • Jan 30th
11 New GW 3.68mm X 75mm SIZE #26 TANGED DRILL BITS TYPE No.1330A

11 New GW 3.68mm X 75mm SIZE #26 TANGED DRILL BITS TYPE No.1330A

  • Highland Park, Michigan, United States
  • Jan 30th
14 New PTD 5/32" X 3" SIZE #20 TANGED DRILL BITS TYPE R08 STOCK #17620 H1

14 New PTD 5/32" X 3" SIZE #20 TANGED DRILL BITS TYPE R08 STOCK #17620 H1

  • Highland Park, Michigan, United States
  • Jan 30th
Bassett 1/8" DM Carbide Spot Drill, 54173

Bassett 1/8" DM Carbide Spot Drill, 54173

  • Meadville, Pennsylvania, United States
  • Feb 22nd
Bassett 1/16" DM Carbide Spot Drill, 54121

Bassett 1/16" DM Carbide Spot Drill, 54121

  • Meadville, Pennsylvania, United States
  • Feb 22nd
ATRAX 5/64" dia. solid micrograin Carbide 4 flute TIALIN coated long 3/16" LOC

ATRAX 5/64" dia. solid micrograin Carbide 4 flute TIALIN coated long 3/16" LOC

  • Conesus, New York, United States
  • Feb 22nd
MACHINIST LOT - 2 NEW 2MT TAPER SHANK STEP DRILLS - (. 8785)x(848) - 11-1/2 OAL

MACHINIST LOT - 2 NEW 2MT TAPER SHANK STEP DRILLS - (. 8785)x(848) - 11-1/2 OAL

  • Orlando, Florida, United States
  • Feb 24th
1-21/32" Drill Bit 4MT, 4 Morse Taper 16-1/4" OAL Unbranded ((#D222))

1-21/32" Drill Bit 4MT, 4 Morse Taper 16-1/4" OAL Unbranded ((#D222))

  • Green Bay, Wisconsin, United States
  • Feb 24th
1-11/16" Drill Bit 4MT, 4 Morse Taper 14-1/2" OALUnbranded ((#D221))

1-11/16" Drill Bit 4MT, 4 Morse Taper 14-1/2" OALUnbranded ((#D221))

  • Green Bay, Wisconsin, United States
  • Feb 24th
ingersall 7/16" coolant thru drill with 1 tip.

ingersall 7/16" coolant thru drill with 1 tip.

  • Woburn, Massachusetts, United States
  • Feb 25th
Sandvik Coolant Fed Drill Bit R842-1110-50-A1A. 1210

Sandvik Coolant Fed Drill Bit R842-1110-50-A1A. 1210

  • United States
  • Feb 25th
Machine Shop Tooling

Machine Shop Tooling

  • Kendall, New York, United States
  • Feb 25th
Lot of 9 CLE-LINE C22713 Jobber Drill Bits, 7/32", Black Oxide, HSS, 5X969

Lot of 9 CLE-LINE C22713 Jobber Drill Bits, 7/32", Black Oxide, HSS, 5X969

  • Chesterfield, Missouri, United States
  • Mar 4th
New!! Interstate 1/8" 118D HSS Black Jobber Drills LOC x 2-3/4" OAL QTY 12

New!! Interstate 1/8" 118D HSS Black Jobber Drills LOC x 2-3/4" OAL QTY 12

  • San Bernardino, California, United States
  • Mar 4th
New!! 3/32" 118D HSS Black Jobber Drills LOC x 2-1/4" OAL QTY 12 USA!

New!! 3/32" 118D HSS Black Jobber Drills LOC x 2-1/4" OAL QTY 12 USA!

  • San Bernardino, California, United States
  • Mar 4th
NEW PRECISION TWIST 40548 R40 3/4" HSS Screw Machine Length Drill 118° Point

NEW PRECISION TWIST 40548 R40 3/4" HSS Screw Machine Length Drill 118° Point

  • Saint Louis, Missouri, United States
  • Mar 28th
NEW VIKING DRILL 260 24370 27/32" HSS Screw Machine Length Drill 118° Point

NEW VIKING DRILL 260 24370 27/32" HSS Screw Machine Length Drill 118° Point

  • Saint Louis, Missouri, United States
  • Mar 28th
NEW VIKING DRILL 260 24380 55/64" HSS Screw Machine Length Drill 118° Point

NEW VIKING DRILL 260 24380 55/64" HSS Screw Machine Length Drill 118° Point

  • Saint Louis, Missouri, United States
  • Mar 28th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies