+ Post new Ad
PTD 41/64" S&D Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#D19)), US $26.60 – Picture 0
PTD 41/64" S&D Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#D19)), US $26.60 – Picture 1
PTD 41/64" S&D Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#D19)), US $26.60 – Picture 2
PTD 41/64" S&D Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#D19)), US $26.60 – Picture 3
PTD 41/64" S&D Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#D19)), US $26.60 – Picture 4
PTD 41/64" S&D Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#D19)), US $26.60 – Picture 5
PTD 41/64" S&D Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#D19)), US $26.60 – Picture 0
PTD 41/64" S&D Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#D19)), US $26.60 – Picture 1
PTD 41/64" S&D Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#D19)), US $26.60 – Picture 2
PTD 41/64" S&D Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#D19)), US $26.60 – Picture 3
PTD 41/64" S&D Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#D19)), US $26.60 – Picture 4
PTD 41/64" S&D Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#D19)), US $26.60 – Picture 5

Ptd 41/64" S&d Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#d19))

US $26.60

  • Green Bay, Wisconsin, United States
  • Jan 30th
Open on mobile:
QR code
Silver & Deming and Reduced Shank Drill Bits; Series/List: R57; Shank Diameter (Inch): 1/2; Drill Bit Size (Decimal Inch): 0.6406; Drill Bit Size (Inch): 41/64; Drill Bit Material: High Speed Steel; Drill Bit Finish/Coating: Bright Series/List R57 Shank Diameter (Inch) 1/2 Drill Bit Size (Decimal Inch) 0.6406 Drill Bit Size (Inch) 41/64 Drill Bit Material High Speed Steel Drill Bit Finish/Coating Bright Shank Type Round with Flats Flute Length (Inch) 3 Drill Point Angle 118 Cutting Direction Right Hand Overall Length (Inch) 6 Specification Designation ANSI Point Type Standard Flute Type Spiral Spiral Type Regular Spiral Number of Flats 3 Through Coolant (Yes/No) No
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Brand Precision
Country/Region of Manufacture Brazil
Model 091541
UPC 086071915412

Directions

Similar products from Other Drilling Tools

NEW SANDVIK INDEXABLE DRILL WITH INSERTS R416.2-1000 P31-41 STK 1121

NEW SANDVIK INDEXABLE DRILL WITH INSERTS R416.2-1000 P31-41 STK 1121

  • Wadley, Alabama, United States
  • Jan 30th
lot of 3 PTD 13/16" S&D Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#D9))

lot of 3 PTD 13/16" S&D Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#D9))

  • Green Bay, Wisconsin, United States
  • Jan 30th
PTD 47/64" S&D Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#D20))

PTD 47/64" S&D Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#D20))

  • Green Bay, Wisconsin, United States
  • Jan 30th
PTD 23/32" S&D Reduced Shank Drill Bit R57 Shank Diameter (Inch): 1/2 ((#D6))

PTD 23/32" S&D Reduced Shank Drill Bit R57 Shank Diameter (Inch): 1/2 ((#D6))

  • Green Bay, Wisconsin, United States
  • Jan 30th
PTD 55/64" S&D Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#D12))

PTD 55/64" S&D Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#D12))

  • Green Bay, Wisconsin, United States
  • Jan 30th
PTD 27/32" S&D Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#D14))

PTD 27/32" S&D Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#D14))

  • Green Bay, Wisconsin, United States
  • Jan 30th
PTD 49/64" S&D Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#D18))

PTD 49/64" S&D Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#D18))

  • Green Bay, Wisconsin, United States
  • Jan 30th
PTD 19/32" S&D Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#D13))

PTD 19/32" S&D Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#D13))

  • Green Bay, Wisconsin, United States
  • Jan 30th
PTD 57/64" S&D Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#D7))

PTD 57/64" S&D Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#D7))

  • Green Bay, Wisconsin, United States
  • Jan 30th
PTD 13/16" S&D Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#D8))

PTD 13/16" S&D Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#D8))

  • Green Bay, Wisconsin, United States
  • Jan 30th
PTD 7/8" S&D Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#D17))

PTD 7/8" S&D Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#D17))

  • Green Bay, Wisconsin, United States
  • Jan 30th
PTD 45/64" S&D Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#D10))

PTD 45/64" S&D Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#D10))

  • Green Bay, Wisconsin, United States
  • Jan 30th
PTD 27/32" S&D Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#D15))

PTD 27/32" S&D Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#D15))

  • Green Bay, Wisconsin, United States
  • Jan 30th
PTD 7/8" S&D Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#D16))

PTD 7/8" S&D Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#D16))

  • Green Bay, Wisconsin, United States
  • Jan 30th
PTD 37/64" S&D Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#D11))

PTD 37/64" S&D Reduced Shank Drill Bit R57 Shank Diameter 1/2 ((#D11))

  • Green Bay, Wisconsin, United States
  • Jan 30th
Guhring Drill Bits 4.83mm Diameter (x6 pc.) set Jobber Slow Spiral (#012)

Guhring Drill Bits 4.83mm Diameter (x6 pc.) set Jobber Slow Spiral (#012)

  • Northport, New York, United States
  • Jan 30th
2 NEW 1 1/32" SPADE DRILL INSERT BITS AMEC # 152N-0101

2 NEW 1 1/32" SPADE DRILL INSERT BITS AMEC # 152N-0101

  • Lyman, South Carolina, United States
  • Jan 30th
Used 7/8"-16 Threading Tap, 7/8" - 16 HS, Thread, DTC # 39A ,

Used 7/8"-16 Threading Tap, 7/8" - 16 HS, Thread, DTC # 39A ,

  • East Bethany, New York, United States
  • Jan 30th
Used 7/8"-14 Threading Tap, 7/8" - 14 HS, Thread, WIDELL # 44A ,

Used 7/8"-14 Threading Tap, 7/8" - 14 HS, Thread, WIDELL # 44A ,

  • East Bethany, New York, United States
  • Jan 30th
Used 7/8"-24 Threading Tap, 7/8" - 24 HS, Thread, REGAL # 38A ,

Used 7/8"-24 Threading Tap, 7/8" - 24 HS, Thread, REGAL # 38A ,

  • East Bethany, New York, United States
  • Jan 30th

People who viewed this item also vieved

3/16 A/C ROUTER BITS 12PCS (W165-12)

3/16 A/C ROUTER BITS 12PCS (W165-12)

  • Miami, Florida, United States
  • Feb 17th
1-1/2 4MT CT STUB CORE DRILL BIT 1PCS (W594-1)

1-1/2 4MT CT STUB CORE DRILL BIT 1PCS (W594-1)

  • Miami, Florida, United States
  • Feb 17th
.578X.6875 2MT COBALT SUBLAND DRILL BIT (D1381-1)

.578X.6875 2MT COBALT SUBLAND DRILL BIT (D1381-1)

  • Miami, Florida, United States
  • Feb 17th
6 INGERSOLL CARBIDE INSERTS CDE212L01 205 STK2091

6 INGERSOLL CARBIDE INSERTS CDE212L01 205 STK2091

  • Wadley, Alabama, United States
  • Feb 22nd
Solid carbide center drill, #5, 60 degree, 6" length

Solid carbide center drill, #5, 60 degree, 6" length

  • Saint Clair Shores, Michigan, United States
  • Feb 24th
Mitsubishi carbide drill MWS0730X8DB VP15TF

Mitsubishi carbide drill MWS0730X8DB VP15TF

  • Willoughby, Ohio, United States
  • Feb 24th
1-1/2" Drill Bit 4MT, 4 Morse Taper 11-1/2" OAL Unbranded ((#D224))

1-1/2" Drill Bit 4MT, 4 Morse Taper 11-1/2" OAL Unbranded ((#D224))

  • Green Bay, Wisconsin, United States
  • Feb 25th
1-13/32" Drill Bit 4MT, 4 Morse Taper 12-1/2" OAL Unbranded ((#D225))

1-13/32" Drill Bit 4MT, 4 Morse Taper 12-1/2" OAL Unbranded ((#D225))

  • Green Bay, Wisconsin, United States
  • Feb 25th
USED CLEVELAND USA 1-29/64" TAPER SHANK 4-FLUTE CORE TWIST DRILL #4MT 1.453"

USED CLEVELAND USA 1-29/64" TAPER SHANK 4-FLUTE CORE TWIST DRILL #4MT 1.453"

  • Fairfield, Iowa, United States
  • Feb 25th
MITSUBISHI Carbide Coolant Drill 4.7mm 0.1850" 140 Deg MZS0470LB VP15TF [1985]

MITSUBISHI Carbide Coolant Drill 4.7mm 0.1850" 140 Deg MZS0470LB VP15TF [1985]

  • Saint Louis, Missouri, United States
  • Feb 26th
METAL REMOVAL Carbide Straight Flute Drills 5.2mm 2FL 130D M11410 Qty 2 <1820>

METAL REMOVAL Carbide Straight Flute Drills 5.2mm 2FL 130D M11410 Qty 2 <1820>

  • Saint Louis, Missouri, United States
  • Feb 26th
MITSUBISHI Carbide Coolant Drill 0.0430&#034; #57 140 Deg MZS00430LB VP15TF [1985]

MITSUBISHI Carbide Coolant Drill 0.0430" #57 140 Deg MZS00430LB VP15TF [1985]

  • Saint Louis, Missouri, United States
  • Feb 26th
Lot of 5 NACHI 25/64 50I A JOBBER LENGTH STRAIGHT HSS SHANK TWIST DRILL BITS

Lot of 5 NACHI 25/64 50I A JOBBER LENGTH STRAIGHT HSS SHANK TWIST DRILL BITS

  • White Lake, Michigan, United States
  • Mar 6th
Lot of 10 NACHI HSS Jobbers Length Twist Drill Rt. Hand Sz #49 Straight shank

Lot of 10 NACHI HSS Jobbers Length Twist Drill Rt. Hand Sz #49 Straight shank

  • White Lake, Michigan, United States
  • Mar 6th
HIGH SPEED TWIST DRILLS - NORSEMAN - JOBBER -UNION MADE IN USA SIZE (1/4)-QTY 12

HIGH SPEED TWIST DRILLS - NORSEMAN - JOBBER -UNION MADE IN USA SIZE (1/4)-QTY 12

  • Davis, California, United States
  • Mar 6th
OSG 220-5000 Solid Carbide Drill,Brand New,1/2&#034;, .500&#034;, 118 Deg

OSG 220-5000 Solid Carbide Drill,Brand New,1/2", .500", 118 Deg

  • Saint Clair Shores, Michigan, United States
  • Apr 24th
NACHI #31 HSS/COBALT DRILLS JOBBERS LENGTH-AIRCRAFT NEW/UNUSED - 10 PCS

NACHI #31 HSS/COBALT DRILLS JOBBERS LENGTH-AIRCRAFT NEW/UNUSED - 10 PCS

  • Roscoe, Illinois, United States
  • Apr 25th
NACHI &#034;U&#034; HSS/COBALT DRILLS SCREW MACHINE LENGTH-AIRCRAFT NEW/UNUSED - 5 PCS

NACHI "U" HSS/COBALT DRILLS SCREW MACHINE LENGTH-AIRCRAFT NEW/UNUSED - 5 PCS

  • Roscoe, Illinois, United States
  • Apr 25th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies