QUADTECH 1715 LCR DIGIBRIDGE, US $1,500.00 – Picture 0

QUADTECH 1715 LCR DIGIBRIDGE, US $1,500.00 – Picture 1

QUADTECH 1715 LCR DIGIBRIDGE, US $1,500.00 – Picture 2

QUADTECH 1715 LCR DIGIBRIDGE, US $1,500.00 – Picture 3

QUADTECH 1715 LCR DIGIBRIDGE, US $1,500.00 – Picture 4

QUADTECH 1715 LCR DIGIBRIDGE, US $1,500.00 – Picture 5

QUADTECH 1715 LCR DIGIBRIDGE, US $1,500.00 – Picture 6

QUADTECH 1715 LCR DIGIBRIDGE, US $1,500.00 – Picture 7

Quadtech 1715 Lcr Digibridge

US $1,500.00

Edinburg, Texas, United States
Jun 9th

Open on mobile:
QR code

Slightly used this unit still has the original screen protector on it. The label is attached,but is starting to fall off, unit has 4 minor surface scuffs areas as shown in photos & circled in red. Includes manual, test leads and power cable. Powered up and ready to work. Digibridge 1715 LCR Meter USES: • Production Testing of LCR Components • Component Design and Evaluation • Component Inspection and Screening • Quality Assurance Testing • Material Testing FEATURES: • 11 Measurement Parameters • 0.2% Basic Measurement Accuracy • Selectable Test Frequency: 100Hz, 120Hz, 1kHz, 10kHz • Selectable Test Voltage: 0.25V, 1.0V • Measurement Speed to 25/second • LCD Display • RS-232 Interface Standard • IEEE and Handler Interfaces, Optional • Automatic Open/Short Zeroing • Automatic Hi/Lo Comparator Limits • Pass/Fail Sorting (8 Bins) • Storage of 1 Setup • Automatic Source Impedance Selection • Keypad Lockout • Easy Operation • Programmable Delay Time Introduction The QuadTech 1715 LCR Digibridge is easily programmable, micro-processor based passive component tester for fast, precise impedance measurements. It measures eleven different parameters with a basic accuracy of 0.2%. The 1715 provides four different test frequencies and two test voltages for testing flexibility. For remote operation and automated system applications, the unit comes standard with an RS-232 interface, plus IEEE-488 and Handler interfaces are available as options. Description 11 Measurement Parameters: Measure and display two of 11 impedance parameters simultaneously with a basic accuracy of 0.2%. Test results can also be shown as Deviation or %Deviation from nominal value. Test Signal: Four user selectable test frequencies: 100Hz, 120Hz, 1kHz, and 10kHz (9.6kHz), plus two test voltages: 0.25V and 1.0V. Display: 40 x 4 character LCD display for user friendly menu programming and measured results. Simultaneously displays primary/secondary values and binning or comparator results. Storage: Storage of 1 setup with parameter, binning and compare information saved. Auto recall of this setup upon power-up of instrument. Auto Ranging: For maximum measurement integrity the 1715 automatically selects the appropriate measurement range and instrument source impedance (25?, 100?, 1k?, 10k? or 100k?), dependent upon the impedance of the device under test. Pass/Fail Testing: The 1715 provides a programmable Hi/Lo comparator function as well as eight sorting bins for categorization of components. Open/Short Zeroing: Reduce the effects of error sources (stray admittance/residual impedance) between the device under test and the calibrated connection to the measuring instrument. Interfaces: For remote control, or adaption to a production environment, the 1715 instrument includes an RS-232 interface as standard equipment.

Condition:	Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...	Brand	QuadTech
Model	1715 LCR Digibridge